• Proceedings of the Korean Magnestics Society Conference
• /
• 1999.04a
• /
• pp.106-107
• /
• 1999

• Proceedings of the Korean Magnestics Society Conference
• /
• 1997.11a
• /
• pp.112-113
• /
• 1997

• Proceedings of the Korean Magnestics Society Conference
• /
• 1991.11a
• /
• pp.108-109
• /
• 1991

• Journal of the Korean Magnetics Society
• /
• v.6 no.6
• /
• pp.382-387
• /
• 1996

The characteristics of the complex permeability of ${(Ni_{x}Cu_{0.2}Zn_{0.8-x}O)}_{1-w}{(Fe_{2}O_{3})}_{1+w}$ with various Ni and $Co_{3}O_{4}$ contents were investigated in this work. It is found that the NiCuZn ferrites with $x{\geq}0.6$ have a relatively small peak width of the imaginary part of permeability $\mu$". The resonance frequency is increased as Ni content becomes higher, where the loss is low. The $\mu$" value decreases with increasing FezO, deficiency, but the resonance frequency($f_{\mu"max}$) is only slightly affected by $Fe_{2}O_{3}$ deficiency. In case of $Co_{3}O_{4}$ addition to the NiCuZn ferrites, the $f_{\mu"max}$ increases since the initial permeability decreases with the amount of $Co_{3}O_{4}$. It is concluded that the Ni content in the NiCuZn ferrite is a dominant factor for the total loss of these spinel ferrites.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.778-781
• /
• 1995

The mixed ferrite $Ni_{x}Co_{1-x}Fe_{2}O_{4}$ have been investigated by X-ray and $M\"{o}ssbauer$ spectoscpy. From the results of X-ray diffraction measurement the structure for this system is spinel, and the lattice constant is in accord with Vegard's law. $M\"{o}ssbauer$ spectra of $Ni_{x}Co_{1-x}Fe_{2}O_{4}$ have been taken at various temperature ranging from 13 to 800 K. The isomer shifts indicate that the valence states of the irons at both A(tetrahedral) and B(octahedral) sithe are found to be in ferric high-spin states. The variation of magnetic hyperfine fields at the A and B sites are explained on the basis on A-B and B-B supertransferred hyperfine interactions. It is found that Debye temperatures for the A and B sites of $CoFe_{2}O_{4}$ and $NiFe_{2}O_{4}$ are found to be ${\theta}_{A}=734{\pm}5K,\;{\theta}_{B}=248{\pm}5K,\;and\;{\theta}_{A}=378{\pm}5K,\;{\theta}_{B}=357{\pm}5K$, respectively. Atomic migration of $Ni_{0.3}Co_{0.7}Fe_{2}O_{4}$ starts near 450 K and increases rapidly with increasing temperature to such a degree that 61 % of the ferric ions at the A site have moved over to the B site by 700 K.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.569-572
• /
• 2003

전력선 통신용 LC 공진필터에 사용되는 Ni-Zn 페라이트를 제조하기 위해 Ni0.8Zn0.2Fe2O4를 기본조성으로 선택하고 x (Co mol 비)를 변화시켜 전자기적 특성을 조사하였다. $Bi_2O_3$ CaO가 첨가됨으로써 균일한 입자성장과 입계에 고저항층이 형성되어 주파수 손실이 감소하였으며, $Ni_{0.8-x}Zn_{0.2}Co_xFe_2O_{\delta}$의 기본조성에 Co의 함량을 증가시키면 x = 0.05에서 투자율 75, 공진주파수 20 MHz의 특성을 나타내고 결정 입자 크기와 같은 구조적 특성에는 영향을 거의 미치지 않지만 자기이방성 변화에 따라 전자기적 특성에는 영향을 미친다. 또한, $Ni_{0.75}Zn_{0.2}Co_{0.05}Fe_2O_{4.017}$ 조성의 페라이트 코어의 발열량은 큐리온도 이하에서 일어난다.

• Journal of Powder Materials
• /
• v.8 no.3
• /
• pp.157-162
• /
• 2001

An optimum route to fabricate the ferrous alloy dispersed $Al_2O_3$ nanocomposites such as $Al_2O_3$/Fe-Ni and $Al_2O_3$/Fe-Co with sound microstructure and desired properties was investigated. The composites were fabricated by the sintering of powder mixtures of $Al_2O_3$ and nano-sized ferrous alloy, in which the alloy was prepared by solution-chemistry routes using metal nitrates powders and a subsequent hydorgen reduction process. Microstructural observation of reduced powder mixture revealed that the Fe-Ni or Fe-Co alloy particles of about 20 nm in size homogeneously surrounded $Al_2O_3$, forming nanocomposite powder. The sintered $Al_2O_3$/Fe-Ni composite showed the formation of Fe$Al_2O_4$ phase, while the reaction phases were not observed in $Al_2O_3$/Fe-Co composite. Hot-pressed $Al_2O_3$/Fe-Ni composite showed improved mechanical properties and magnetic response. The properties are discussed in terms of microstructural characteristics such as the distribution and size of alloy particles.

• Journal of Magnetics
• /
• v.20 no.4
• /
• pp.353-359
• /
• 2015

Dielectric properties of $xBaTiO_3-(1-x)CoFe_2O_4$ composite materials have been investigated. Dielectric properties of $BaTiO_3$, $CoFe_2O_4$ and $0.5BaTiO_3-0.5CoFe_2O_4$ samples show frequency dependence, which is classified as relaxor behavior with different relaxing degree. The relaxor behaviors were described using the modified Curier-Weiss and Vogel-Fulcher laws. Among three above samples, the $BaTiO_3$ sample has highest relaxing degree. Photoluminescence spectral indicated defects, which might in turn control relaxing degree.

• Korean Journal of Metals and Materials
• /
• v.49 no.2
• /
• pp.167-173
• /
• 2011

Nickel cobalt ferrite($Ni_{0.5}Co_{0.5}Fe_2O_4$) powder was prepared through the ceramic route by the calcination of a stoichiometric mixture of NiO, CoO and $Fe_2O_3$ at $1100^{\circ}C$. The pressed pellets of $Ni_{0.5}Co_{0.5}Fe_2O_4$ were isothermally reduced in pure hydrogen at $800{\sim}1100^{\circ}C$. Based on the thermogravimetric analysis, the reduction behavior and the kinetic reaction mechanisms of the synthesized ferrite were studied. The initial ferrite powder and the various reduction products were characterized by X-ray diffraction, scanning electron microscopy, reflected light microscope and vibrating sample magnetometer to reveal the effect of hydrogen reduction on the composition, microstructure and magnetic properties of the produced Fe-Ni-Co alloy. The arrhenius equation with the approved mathematical formulations for the gas solid reaction was applied to calculate the activation energy($E_a$) and detect the controlling reaction mechanisms. In the initial stage of hydrogen reduction, the reduction rate was controlled by the gas diffusion and the interfacial chemical reaction. However, in later stages, the rate was controlled by the interfacial chemical reaction. The nature of the hydrogen reduction and the magnetic property changes for nickel cobalt ferrite were compared with the previous result for nickel ferrite. The microstructural development of the synthesized Fe-Ni-Co alloy with an increase in the reduction temperature improved its soft magnetic properties by increasing the saturation magnetization($M_s$) and by decreasing the coercivity($H_c$). The Fe-Ni-Co alloy showed higher saturation magnetization compared to Fe-Ni alloy.

• Journal of the Korean Magnetics Society
• /
• v.15 no.3
• /
• pp.186-190
• /
• 2005

The $Al_{0.2}CoFe_{1.8}O_4$ ferrite films and powders were prepared by the sol-gel method. The crystallographic and magnetic properties of the samples were examined with annealing temperature by X-ray diffraction, $M\ddot{o}ssbauer$ spetroscopy and vibrating sample magnetometry. The powder samples showed the presence of spinel structure at annealing temperatures above 673 K, while the film samples indicated the spinel structure above 873 K, also the particle size increased with rising annealing temperatures. The $M\ddot{o}ssbauer$ spectra of $Al_{0.2}CoFe_{1.8}O_4$ powder annealed above 873 K could be fitted as the superposition of two Zeeman sextets due to ferrimagnetic phase. And the spectra of annealed at 673 K exhibited the superposition of ferrimanetic and paramagnetic phase and those of annealed at 473 K showed only a paramagnetic phase. The magnetic behaviour of powders appeared that the coercivity increased until annealed at 673 K but decreased above this temperature. The coercivity of the film samples decreased from 1.084 kOe at 873 K to 0.540 kOe at 1073 K with increasing annealing temperatures.