• Journal of Life Science
• /
• v.20 no.2
• /
• pp.237-244
• /
• 2010

Five mold strains - Mucor racemousus, Rhizopus oryzae, Aspergillus oryzae, Aspergillus kawachii, and Monascus purpureus - were used for the fermentation of both freeze-dried and air-dried silkworm powders. The concentrations of proteins and minerals, electrophoretical protein patterns, fatty acid composition and the activities of fibrinolytic and antioxidation with freeze-dried silkworm (FDSW) or air-dried silkworm powders (ADSW) fermented by the five molds were investigated. The concentrations of major minerals in fermented FDSW and ADSW powders were K by 72.0-76.3 and 77.1-78.9 ppm, Mg by 29.6-49.7 and 44.3-58.7 ppm, Ca by 1.9-14.9 and 9.8-21.6 ppm and Zn by 0.64-0.70 and 4.17-4.52 ppm, respectively. Major fatty acids in fermented FDSW and ADSW powders were linolenic acid, oleic acid, and palmitic acid. There were slightly varietal differences in electrophoretical protein patterns when total protein patterns of fermented FDSW and ADSW powders were analyzed by native-and SDS-polyacrylamide gel electrophoresis (PAGE). DPPH radical scavenging activity was slightly stronger in fermented ADSW powders than that in fermented FDSW. Fibriolytic activity was only detected in the FDSW fermented by Aspergillus kawachi and Monascus purpureus. These results may provide the basic data to understand the biological activities and chemical characteristics of silkworm fermented by mold, which can be used for the development of functional foods.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.3
• /
• pp.249-257
• /
• 2007

State of problem : The use of zirconium oxide all-ceramic material provides several advantages, including a high flexural strength(>1000MPa) and desirable optical properties, such as shading adaptation to the basic shades and a reduction in the layer thickness. Along with the strength of the materials, the cementation technique is also important to the clinical success of a restoration. Nevertheless, little information is available on the effect of different surface treatments on the bonding of zirconium high-crystalline ceramics and resin luting agents. Purpose : The aim of this study was to test the effects of surface treatments of zirconium on shear bond strengths between bovine teeth and a zirconia ceramic and evaluate differences among cements Material and methods : 54 sound bovine teeth extracted within a 1 months, were used. They were frozen in distilled water. These were rinsed by tap water to confirm that no granulation tissues have left. These were kept refrigerated at $4^{\circ}C$ until tested. Each tooth was placed horizontally at a plastic cylinder (diameter 20mm), and embedded in epoxy resin. Teeth were sectioned with diamond burs to expose dentin and grinded with #600 silicon carbide paper. To make sure there was no enamel left, each was observed under an optical microscope. 54 prefabricated zirconium oxide ceramic copings(Lava, 3M ESPE, USA) were assigned into 3 groups ; control, airborne-abraded with $110{\mu}m$ $Al_2O_3$ and scratched with diamond burs at 4 directions. They were cemented with a seating force of 10 ㎏ per tooth, using resin luting cement(Panavia $F^{(R)}$), resin cement(Superbond $C&B^{(R)}$), and resin modified GI cement(Rely X $Luting^{(R)}$). Those were thermocycled at $5^{\circ}C$ and $55^{\circ}C$ for 5000 cycles with a 30 second dwell time, and then shear bond strength was determined in a universal test machine(Model 4200, Instron Co., Canton, USA). The crosshead speed was 1 mm/min. The result was analyzed with one-way analysis of variance(ANOVA) and the Tukey test at a significance level of P<0.05. Results : Superbond $C&B^{(R)}$ at scratching with diamond burs showed the highest shear bond strength than others (p<.05). For Panavia $F^{(R)}$, groups of scratching and sandblasting showed significantly higher shear bond strength than control group(p<.05). For Rely X $Luting^{(R)}$, only between scratching & control group, significantly different shear bond strength was observed(p<.05). Conclusion : Within the limitation of this study, Superbond $C&B^{(R)}$ showed clinically acceptable shear bond between bovine teeth & zirconia ceramics regardless of surface treatments. For the surface treatment, scratching increased shear bond strength. Increase of shear bond strength by sandblasting with $110{\mu}m$ $Al_2O_3$ was not statistically different.

• KOMUNHWA
• /
• no.69
• /
• pp.41-62
• /
• 2007

This thesis is focused on the bat symbol, especially prevalent crafts’ pattern in late Joseon period on museum collections. For the use and reperception of them, I am aimed for appropriate analysis of bat symbol by co connotation which reflects the characteristics on number.plastic.color symbol. This point of view, bat idea and bat paintings in Joseon period will be the source of meanings to the denotation of bat patterns. In the museum collections, bat paintings and patterns are calculated 324 objects. By functional classification, the bat patterns on dwelling-crafts for the royal and for the people will be discussed. In result, the bat paintings were only a few, however, usually connoted Taoist hermit with super-natural powers.longevity.protector of Lightning-God.praying for long life, which were based on Taoism. Meanwhile the bat symbol of dwelling-crafts for the royal projected the longevity and prosperity of king and queen. By he Five Blessings and good auspices in Ching dynasty, number of '5.4' implied 'Five Blessings', Through the correct recognition of homo-phone, "a bat(蝠, fu)=happiness(福, fu)$\rArr$five bats(五蝠)$\rArr$Five Blessings(五福 )." In the case of bat symbol on the dwelling-crafts for the people, especially its for women, it expressed on the metal-decoration of furniture and paper-crafts. In the metal-decoration, the signified of bat symbol were expellant-evil('guard') that of characteristic signifier, white-silver color, number '1' and 'flying-type'. The bat symbol on paper-crafts for the people signified 'double happiness'.harmony.sons with number of '2', 'Five Colors' and the transformation of 'flying-type'. Accordingly, the bat symbol on the dwelling-crafts for the people marked 'happiness and guard', because the people had concrete cognition the bat symbol as a denotation of 'happiness and 'guard' by itself

• Journal of the Korea Concrete Institute
• /
• v.16 no.1 s.79
• /
• pp.79-87
• /
• 2004

The qualify of lightweight aggregate made from waste PET bottle(WPLA) and the workability, the unit weight and strength property of concrete with WPLA were investigated for the purpose of recycling the waste PET bottles as lightweight concrete fine aggregate. This study indicated a good result that WPLA should be replaced with less than $50\%$ of natural fine aggregate. When WPLA was replaced with $50\%$ of natural fine aggregate, the specific gravity and water absorption of mixed fine aggregate were greatly reduced about 23 and $75\%$ respectively in comparison with those of river sand. The quality of WPLA affected on the properties of lightweight aggregate concrete. The workability of fresh concrete with WPLA(WPLAC) was improved with increasing the replacement ratio of WPLA and water cement ratio. Slump increasing ratio of the former showed about $45 {\~} 120\%$ because that a specific gravity of fine aggregate was decreased from 2.6 to 1.7. The unit weight of concrete with $75\%$ WPLA was decreased about $17\%$ in comparison with that of control concrete. Furthermore, the compressive strength of concrete with 25 and $50 \%$ WPLA at the age of 28 days increased higher than 30 MPa regardless with water cement ratio (W/C=45, 49 and $53\%$) of this study. Specific strength of concrete with $25\%$ WPLA, $15.11{\times}10^3 MPa{\cdot}m^3/kg$, was higher than that of contro concrete in water cement ratio of $49\%$. The compressive strength-splitting tensile strength ratio and compressive strength-modulus of elasticity ratio of WPLAC were similar to that of nomal lightweight aggregate concrete. This results showed a good estimation that WPLA will be able to recycled as a fine aggregate for lightweight concrete.

• Journal of the Korea Concrete Institute
• /
• v.16 no.1 s.79
• /
• pp.43-53
• /
• 2004

The current Korean Concrete Design Code(KCI Code) requires the minimum and maximum content of shear s in order to prevent brittle and noneconomic design. However, the required content of the steel reinforcement In KCI Code is quite different to those of the other design codes such as fib-code, Canadian Code, and Japanese Code. Furthermore, since the evaluation equations of the minimum and maximum shear reinforcement for the current KCI Code were based on the experimental results, the equations can not be used for the RC members beyond the experimental application limits. The concrete tensile strength, shear stress, crack inclination, strain perpendicular to the crack, and shear span ratio are strongly related to the lower and upper limits of shear reinforcement. In this research, an evaluation equation for the minimum content of shear reinforcement is theoretical proposed from the Wavier's three principals of the mechanics of materials.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.1
• /
• pp.34-38
• /
• 2017

Myelophycus simplex Papenfuss, a type of brown algae, is known to be majorly distributed in along the southern coast of Korea and Japan. The purpose of this study was to investigate the effects of M. simplex Papenfuss methanol extract (MSPME) on melanogenesis in ${\alpha}$-melanocyte-stimulating hormone-stimulated B16F10 melanoma cells. Melanin contents of B16F10 melanoma cells were decreased by 27, 41, and 59% in a dose-dependent manner, upon MSPME treatment at 100, 300, and $500{\mu}g/mL$, respectively. Tyrosinase activities in B16F10 melanoma cells were decreased by 18, 49, and 61% in a dose-dependent manner, upon MSPME treatment at 100, 300, and $500{\mu}g/mL$, respectively. MSPME suppressed expression of tyrosinase, tyrosinase-related protein-1, tyrosinase-related protein-2, and melanocyte-inducing transcription factor in B16F10 melanoma cells. Concentration of $50{\mu}g/mL$ of MSPME especially induced greater decreases in tyrosinase activity, melanin contents, and melanogenic enzyme protein expressions. This results indicate that MSPME inhibits melanin synthesis and tyrosinase activity, and M. simplex Papenfuss extract may be an ideal candidate as a skin whitening agent.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.3
• /
• pp.194-201
• /
• 2010

Purpose: The purpose was to compare the marginal fidelity and the fracture resistance of the zirconia crowns according to the various coping designs with different thicknesses and cement types. Materials and methods: Zirconia copings were designed and fabricated with various thicknesses using the CAD/CAM system (Everest, KaVo Dental GmbH, Biberach., Germany). Eighty zirconia copings were divided into 4 groups (Group I: even 0.3 mm thickness, Group II: 0.3 mm thickness on the buccal surface and the buccal half of occlusal surface and the 0.6 mm thickness on the lingual surface and the lingual half of occlusal surface, Group III: even 0.6 mm thickness, Group IV: 0.6 mm thickness on the buccal surface and the buccal half of occlusal surface and the 1.0 mm thickness on the lingual surface and the lingual half of occlusal surface) of 20. By using a putty index, zirconia crowns with the same size and contour were fabricated. Each group was divided into two subgroups by type of cement: Cavitec$^{(R)}$ (Kerr Co, USA) and Panavia-$F^{(R)}$ (Kuraray Medical Inc, Japan). After the cementation of the crowns with a static load compressor, the marginal fidelity of the zirconia crowns were measured at margins on the buccal, lingual, mesial and distal surfaces, using a microscope of microhardness tester (Matsuzawa, MXT-70, Japan, ${\times}100$). The fracture resistance of each crown was measured using a universal testing machine (Z020, Zwick, Germany) at a crosshead speed of 1 mm/min. The results were analyzed statistically by the two-way ANOVA and oneway ANOVA and Duncan's multiple range test at $\alpha$=.05. Results: Group I and III showed the smallest marginal fidelity, while group II demonstrated the largest value in Cavitec$^{(R)}$ subgroup (P<.05). For fracture resistance, group III and IV were significantly higher than group I and II in Cavitec$^{(R)}$ subgroup (P<.05). The fracture resistances of Panavia-$F^{(R)}$ subgroup were not significantly different among the groups (P>.05). Panavia-$F^{(R)}$ subgroup showed significantly higher fracture resistance than Cavitec$^{(R)}$ subgroup in group I and II (P<.05). Conclusion: Within the limitation of this study, considering fracture resistance or marginal fidelity and esthetics, a functional ceramic substructure design of the coping with slim visible surface can be used for esthetic purposes, or a thick invisible surface to support the veneering ceramic can be used depending on the priority.

• Journal of Intelligence and Information Systems
• /
• v.24 no.2
• /
• pp.37-57
• /
• 2018

With the spread of smart phones, interest in mobile media is on the increase as useful media recently. Mobile media is assessed as having differentiated advantages from existing media in that not only can they provide consumers with desired information anytime and anywhere but also real-time interaction is possible in them. So far, studies on mobile advertising were mostly researches analyzing satisfaction with, and acceptance of, mobile advertising based on survey, researches focusing on the factors affecting acceptance of mobile advertising messages and researches verifying the effect of mobile advertising on brand recall, advertising attitude and brand attitude through experiments. Most of the domestic mobile advertising studies related to advertisement effect and advertisement attitude have been conducted through experiments and surveys. The advertising effectiveness measure of the mobile ad used the attitude of the advertisement, purchase intention, etc. To date, there have been few studies on the effects of mobile advertising on actual advertising data to prove the characteristics of the advertising platform and to prove the relationship between the factors influencing the advertising effect and the factors. In order to explore advertising effect of mobile advertising platform currently commercialized, this study defined advertising characteristics and media characteristics from the perspective of advertiser, advertising platform and publisher and analyzed the influence of each characteristic on advertising effect. As the advertisement characteristics, we classified advertisement format classified by bar type and floating type, and advertisement material classified by image and text. We defined advertisement characteristics of advertisement platform as Hedonic and Utilitarian media characteristics. As a dependent variable, we use CTR, which is the ratio of response (click) to ad exposure. The theoretical background and the analysis of the mobile advertising business, the hypothesis that the advertisement effect is different according to the advertisement specification, the advertisement material, In the ad standard, bar ads are classified as static framing, Floating ads can be categorized as dynamic framing, and the hypothetical definition of floating advertisements, which are high-profile dynamic framing ads, is highly responsive. In advertising, images with high salience are defined to have higher ad response than text. In the media characteristics classified as practical / hedonic type, it is defined that the hedonic type media has a more relaxed tendency than the practical media, and there is a high possibility of receiving various information because there is no clear target. In addition, image material and hedonic media are defined to be highly effective in the interaction between advertisement specification and advertisement material, advertisement specifications and media characteristics, and advertisement material and media characteristics. As the result of regression analysis on each characteristic, material standard, which is a characteristic of mobile advertisement, and media characteristics separated into 'Hedonic' and 'Utilitarian' had significant influence on advertisement effect and mutual interaction effect was also confirmed. In the mobile advertising standard, the advertising effect of the floating advertisement is higher than that of the bar advertisement, Floating ads were more effective than text ads for image ads. In addition, it was confirmed that the advertising effect is higher in the practical media than the hedonic media. The research was carried out with the big data collected from the mobile advertising platform, and it was possible to grasp the advertising effect of the measure index standard which is used in the practical work which could not be grasped in the previous research. In other words, the study was conducted using the CTR, which is a measure of the effectiveness of the advertisement used in the online advertisement and the mobile advertisement, which are not dependent on the attitude of the ad, the attitude of the brand, and the purchase intention. This study suggests that CTR is used as a dependent variable of advertising effect based on actual data of mobile ad platform accumulated over a long period of time. The results of this study is expected to contribute to establishment of optimum advertisement strategy such as creation of advertising materials and planning of media which suit advertised products at the time of mobile advertisement.

• Korean journal of applied entomology
• /
• v.47 no.1
• /
• pp.87-93
• /
• 2008

Bacillus thuringiensis with selected high toxicities against tobacco cutworm, Spodoptera litura were isolated from domestic soils. When being observed under a phase-contrast microscope, the insecticidal crystal proteins were showed a bipyramidal crystal types. New CAB 109 isolate was identified to B. thuringiensis subsp. aizawai in the H serotype. As a results of insecticidal activities between CAB 109 isolate and 3 existing ready-made products against 3rd larva of S. litura, CAB 109 isolate showed 100% mortality with spore concentration $(1.3{\times}10^7cfu/ml)$. It was a very high insecticidal activity compared with a existing ready-made B. t. products. $LD_{50}$ values of CAB 109 isolate was $9.78{\times}10^5,\;6.87{\times}10^6\;and\;1.83{\times}10^7cfu/ml$ spore concentration against 2nd, 3rd and 4th larva of S. litura, respectively. Unlike Plutella xylostella, S. litura was slowly died after application up to 7 days. The weight of S. litura larva applied with CAB 109 isolate were 6-7 times less than controlled group. Even though it didn't die, it did not grow into next larva. The result observed with scanning electron microscope was that CAB 109 isolate of B. t. aizawai formed a typical bipyramidal crystal protein type. Otherwise, when CAB 109 isolate was examined with SDS-PAGE and with trypsin, there was no difference between CAB 109 strain and ready-made products of B. thuringiensis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.10
• /
• pp.1510-1518
• /
• 2014

This study investigated the effects of calcium citrate on papain-induced osteoarthritis in C57BL/6J mice. Osteoarthritis was induced by injecting $6{\mu}L$ of papain into the knee joints of mice. Calcium citrate was made by crushing the centrifuged precipitate after reacting 0.5 M citric acid with 1 kg of oyster shell extract. The mice were divided into five groups (n=8). The normal group was untreated, whereas the papain group was induced to have osteoarthritis and treated with $200{\mu}L$ of water per day. The papain+DS group was treated with diclofenac sodium. The papain+calcium citrate groups were treated with calcium citrate at 150 and 300 mg/kg/bw for 28 days. Proteoglycan contents in articular cartilages were measured by safranin O/fast green staining and hematoxylin & eosin staining. Histopathological changes in cartilages were analyzed by the Rudolphi score approach. Contents of pro-inflammatory cytokines including TNF-${\alpha}$, IL-$1{\beta}$ and IL-6 in plasma, were measured by the ELISA method. Body weights among the treated groups were not significantly different compared with that of the normal group. Cartilage loss and joint instability in the calcium citrate group improved significantly (P<0.05) in a dose-dependent manner compared with the papain group. Further, proteoglycan content of the calcium citrate group was considerably (P<0.05) higher than that of the papain group. Osteoarthritis scores in the calcium citrate group were considerably (P<0.05) reduced compared with the papain group. In the group treated with calcium citrate, contents of TNF-${\alpha}$, IL-$1{\beta}$ and IL-6 in plasma were significantly (P<0.05) reduced in a dose-dependent manner in comparison with the normal group. Based on these results, we suggest that calcium citrate is effective for treatment of osteoarthritis.