• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.430-433
• /
• 2001

The 0.96MgTiO$_3$-0.04SrTiO$_3$+xCe(x=0∼1.6 wt%) ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were 1300$^{\circ}C$, 2hr., respectively. From the X-ray diffraction patterns, it was found that the perovskite SrTiO$_3$ and ilmenite MgTiO$_3$ structures were coexisted in the 0.96MgTiO$_3$-0.04SrTiO$_3$+xCe(x=0∼1.6 wt%) ceramics. The dielectric constant($\varepsilon$$\sub$r/) was increased with addition of Ce. The temperature coefficient of resonant frequency($\tau$$\sub$f/) was gradually varied from positive value to the negative value with increasing the Ce. The temperature coefficient of resonant frequency of the 0.96MgTiO$_3$-0.04SrTiO$_3$+0.2Ce ceramics was near zero, where the dielectric constant, quality factor, and $\tau$$\sub$f/ were 20.68, 50, 272 and -0.5pm/$^{\circ}C$, respectively.

• 한국전기전자재료학회논문지
• /
• 제13권11호
• /
• pp.959-962
• /
• 2000

We have fabricated good quality superconducting YBa$_2$Cu$_3$$O_{7-x}$(YBCO) thin films on Hastelloy(Ni-Cr-Mo alloys) metallic substrates with CeO$_2$and BaTiO$_3$buffer layers in-situ by pulsed laser deposition in a multi-target processing chamber. YBCO film with CeO$_2$single buffer layer shows T$_{c}$ of 71.64 K and the grain size less than 0.1${\mu}{\textrm}{m}$. When BaTiO$_3$ is used as a single buffer layer, the grain size of YBCO is observed to be larger than that of YBCO/CeO$_2$by 200 times and the transition temperature of the film is enhanced to be about 84 K. CeO$_2$/BaTiO$_3$double buffer layer has been adopted to enhance the superconducting properties, which results in the enhancement of the critical temperature and the critical current density to be about 85 K and 8.4$\times$10$^4$ A/$\textrm{cm}^2$ at 77 K, respectively mainly due to the enlargement of the grain size of YBCO film.ilm.

• 한국진공학회지
• /
• 제9권1호
• /
• pp.16-23
• /
• 2000

The epitaxial growth of $CeO_2$ films has been investigated on three different substrates-Si(111), $SrTiO_3$(001), and MgO(001)-over wide range of growth parameters using oxygen-plasma-assisted molecular beam epitaxy. Pure-phase, single-crystalline epitaxial films of $CeO_2$ (001) have been grown only on $SrTiO_3$(001). We discuss the growth conditions in conjunction with the choice of substrates required to synthe-size this oxide, as well as the associated characterization by menas of x-ray diffraction, reflection high-energy electron diffraction, low-energy electron diffraction, and x-ray photoelectron spectroscopy and diffraction. Successful growth of single crystalline $CeO_2$ depends critically on the choice of substrate and is rather insensitive to the growth conditions studied in this investigation. $CeO_2$(001) films on $SrTiO_3$exhibit the sturcture of bulk $CeO_2$ without surface reconstructions. Ti outdiffusion is observed on the films grown temperatures above $650^{\circ}C$.

• 한국세라믹학회지
• /
• 제54권1호
• /
• pp.23-27
• /
• 2017

A series of $CeO_2-TiO_2$ composite samples with different Ce/Ti molar ratios were prepared by the paper template. Powder X-ray diffraction (XRD) and transmission electron microscopy (TEM) were used to confirm a face-centered cubic lattice of $CeO_2$ with Ce/Ti =8:2 or 9:1 and a two phase mixture of anatase titania and face-centered cubic ceria with Ce/Ti = 7 : 3. The field emission scanning electron microscopy (FESEM) results suggest that the products are micron braid structures consisting of fibers with diameters in a range of $1-6{\mu}m$ and lengths of several hundred micrometers. $N_2$ absorption-desorption testing shows that the composite at Ce/Ti molar fraction of 8 : 2 has the largest BET surface area (about $81m^2{\cdot}g^{-1}$). Compared to the pure $CeO_2$ sample, the composites show superior catalytic activity for $H_2$ reduction and CO oxidation. For the micron braid structure $CeO_2-TiO_2$ composite (Ce/Ti = 8 : 2), due to the high surface area and the solid solution with appropriate $Ti^{4+}$ incorporation, the CO conversion at about $280^{\circ}C$ was above 50% and at $400^{\circ}C$ was 100%.

• 대한환경공학회지
• /
• 제22권12호
• /
• pp.2263-2273
• /
• 2000

희분식 고온/고압 미분반응기를 이용하여 습식산화 반응시 대표적 난분해성 중간 산화물질로 알려진 아세트산을 산화반응 기질로 하여 여러 가지 담체 및 촉매의 조합에 대한 산화반응성을 실험하였다. 사용된 담체는 다공성 실리카($SiO_2$), 티타니아($TiO_2$), 지르코니아($ZrO_2$), $ZrSiO_4$, $ZrO_2(10wt%)/TiO_2$ 등이었으며 촉매활성성분온 크게 Ru, Mn, Ce의 세 가지로서 단독 혹은 조합사용(2성분계 및 3성분계)시의 산화활성에 대하여 조사하였다. 이를 통하여 일차척인 활성이 우수한 것으로 나타난 $Mn(2.8)-Ce(7.2wt%)/TiO_2$ 혹은 $Ru(0.5)-Mn(2.7)-Ce(6.8wt%)/TiO_2$ 기준촉매의 활성증진을 위하여 p-type 반도체 물질(CoO, SnO 및 $Ag_2O$)를 첨가제로 소량 사용함으로써 이에 따른 습식산화 반응 상대 활성실험을 수행하였다. 우선, $Mn-Ce/TiO_2$ 기준촉매에 있어서, p-type 반도체 물질(CO, Sn Ag)을 첨가한 경우, 모두 활성증진효과를 보이며 크기 정도는 Co> Ag >Sn순이었다. 특히, $Mn(2.7)-Ce(6.8)-Co(0.5wt%) /TiO_2$에 있어서는 약 2.6배의 높은 활성상승이 나타났다. 이의 가시적인 주원인은 표면적 증가 및 시너지 효과에 기인하는 것으로 판단되었다. $Ru-Mn-Ce/TiO_2$ 기준 촉매에 있어서는 $Ru(O.5)-Mn(2.4)-Ce(6.1)-Co(1.0wt%)/TiO_2$에서만 활성증진효과를 보였으며 그 이외의 다른 경우에 있어서는 표면적 및 활성감소가 일어났다.

• Bulletin of the Korean Chemical Society
• /
• 제19권1호
• /
• pp.107-109
• /
• 1998

The $SnO_2$, Sn-doped $In_2O+3\; and \;Ce-doped\; TiO_2$ films have been prepared by RF sputtering method, and their opto-electrochemical properties were investigated in view of the applicability as counter electrodes in the electrochromic window system. These oxide films could reversibly intercalate $Li^+$ ions owing to the nanocrystalline texture, but remained colorless and transparent. The high transmittance of the lithiated films could be attributed to the prevalence of the $Sn^{4+}/Sn^{2+}\; and\; Ce^{4+}/Ce^{3+}$ redox couples having 5s and 6s character conduction bands, respectively. For the Ce-doped $TiO_2$ film, $(TiO_2)_{1-x}(CeO_2)_x$, an optimized electrochemical reversibility was found in the film with the composition of x = 0.1.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.790-793
• /
• 2000

We have fabricated good quality superconducting YBa$_2$Cu$_3$$O_{7-x}$(YBCO) thin films on Hastelloy(Ni-Cr-Mo alloys) metallic substrates with CeO$_2$and BaTiO$_3$buffer layers in-situ by pulsed laser deposition in a multi-target processing chamber. YBCO film with CeO$_2$ single buffer layer shows T$_{c}$ of 71.64 K and the grain size less than 0.1 ${\mu}{\textrm}{m}$. When BaTiO$_3$is used as a single buffer layer, the grain size of YBCO is observed to be larger than that of YBCO/CeO$_2$by 200 times and the transition temperature of the film is enhanced to be about 84 K. CeO$_2$/BaTiO$_3$double buffer layer has been adopted to enhance the superconducting properties, which results in the enhancement of the critical temperature and the critical current density to be about 85 K and 8.4 $\times$ 10$^4$ A/cm$^2$ at 77 K, respectively mainly due to the enlargement of the grain size of YBCO film.ilm.

• Bulletin of the Korean Chemical Society
• /
• 제34권8호
• /
• pp.2461-2465
• /
• 2013

Pd-$Ce/{\gamma}-Al_2O_3-TiO_2$ catalysts were prepared by combined sol-gel and impregnation methods. Transmission electron microscopy, X-ray diffraction, $H_2$-temperature-programmed reduction, $O_2$-temperature-programmed desorption, and ethanol oxidation experiments were conducted to determine the properties of the catalysts. Addition of an optimal amount of Ce improved the performance of the $Pd/{\gamma}-Al_2O_3-TiO_2$ catalyst in promoting the complete oxidation of ethanol. The catalyst with 1% Ce exhibited the highest activity, and catalyzed complete oxidation of ethanol at $175^{\circ}C$; its selectivity to $CO_2$ reached 87%. Characterization results show that addition of appropriate amount of Ce could enrich the PdO species, and weaken the Pd-O bonds, thus enhancing oxidation ability of the catalyst. Meanwhile, the introduction of $CeO_2$ could make PdO better dispersed on ${\gamma}-Al_2O_3-TiO_2$, which is beneficial for the improvement of the catalytic oxidation activity.

• 청정기술
• /
• 제29권4호
• /
• pp.313-320
• /
• 2023

대표적인 비암모니아성 선택적 촉매환원반응기인 H₂-SCR의 활용성을 높이기 위하여 Ce를 조촉매로 활용한 PtNi/CeO₂-W-TiO₂의 촉매 분말을 합성하고 다공성 금속 구조(porous metal structure, PMS)에 코팅하여 선택적 촉매 환원에 의한 NOx 제거 특성을 평가하였다. CeO₂를 조촉매로 사용한 H₂-SCR은 CeO₂를 사용하지 않은 경우에 비해 더 높은 NOx 제거 효율을 나타내었으며, CeO₂ 담지율 10 wt%에서는 반응온도 90℃에서 가장 높은 제거효율을 보였다. 한편, 촉매구조체인 PMS의 촉매 코팅량이 증가함에 따라 NOx 제거효율은 90℃ 이하에서는 향상되었으나, 120℃ 이상에서는 감소하는 경향을 보였고 공간속도를 4,000 h^-1에서 20,000 h^-1로 변경한 경우, 120℃이상의 온도에서 NOx 제거 효율이 향상되는 것을 확인할 수 있었다.

• 자원환경지질
• /
• 제35권2호
• /
• pp.97-102
• /
• 2002

Ce-파이로클로어(Ce-pyrochlore; CaCe $Ti_2 $O_7)는 장주기 방사성 폐기물인 악티나이드 원소들을 고정화시킬 수 있는 새로운 물질이므로 Ce-파이로클로어를 합성하여 강평형 관계 및 특성을 연구하였다. 혼합된 시료는 상온에서 200-400kg/$\textrm{cm}^2$의 압력으로 성형한 후, 1000-150$0^{\circ}C$ 범위에서 소결온도 및 분위기를 변화시키면서 소성하였다. 합성된 시료는 XRD, SEM/EDS를 사용하여 상분석과 정량분석을 실시하였다. 실험결과, Ce-파이로클로어이 최적 합성조건은 산소분위기 하에서, 130$0^{\circ}C$로 소결하였을 때였으며, 이때의 화학조성은 $Ca_{1-x}Ti_{2-y}O_{7-x-2y}$ (x=0.03-0.05, y=0.02~0.04) 으로써 비화학양론적인 특성을 보였다. Ce-파이로클로어는 1300~140$0^{\circ}C$에서 빠른 비조화 분해현상을 나타내었으며, 140$0^{\circ}C$ 이상에서는 페로브스카이트(perovskite)와 로파라이트(loparite; $Ce_{0.66}TiO_{3}$)사이의 부분 고용체인 Ce(III)페로브스카이트가 주요상으로써 관찰되었다.