• Korean Journal of Food Science and Technology
• /
• v.24 no.2
• /
• pp.154-159
• /
• 1992

An investigation was carried out to study the feasibility of tofu preparation with using isolated soyprotein(ISP) only. The ISP tofu was prepared by boiling the ISP suspension for 2 min before addition of coagulants. Effects of coagulants($CaSO_{4},\;CaCl_{2}\;MgCl_{2}\;GDL$) and coagulation temperature in the range of $2{\sim}95^{\circ}C$ were studied on the amounts of coagulants required, size and shape of coagulates, volume yield and textural properties of tofu. It was found that amounts of coagulants and tofu volume was significantly reduced and the larger and cloud-like shape was obtained as the coagulation temperature increased. A rather precipitation was occured under $40\;or\;50^{\circ}C$, which caused difficulty for tofu formation by pressing. GDL and $CaSO_{4}$ showed higher yields than those of $CaCl_{2}\;and\;MgCl_{2}$ at low temperature range and little difference at high temperature. In the textural properties of hardness, brittleness and gumminess of tofu were almost lineary and rapidly increased as the coagulation temperature increased where $CaCl_{2}\;and\;GDL$ produced highest and lowest of those values, respectively. The elasticity was reduced as the temperature increased for those made with $MaCl_{2},\;CaSO_{4}\;GDL\;and\;CaCl_{2}$, tofu showed little change.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.4
• /
• pp.311-319
• /
• 2017

Scale formation is inevitable problem when seawater is treated by vacuum membrane distillation. The reason is the high concentration of calcium ion($Ca^{2+}$), sulfate ion(${SO_4}^{2-}$) and bicarbonate ion(${HCO_3}^-$). These ions form calcium sulfate($CaSO_4$) and calcium carbonate($CaCO_3$) on the membrane. The scale formed on membrane has to be removed, because the flux can be severely reduced and membrane wetting can be incurred. This study was carried out to investigate scale formation and effectiveness of acid cleaning in vacuum membrane distillation for SWRO brine treatment. It was found that permeate flux gradually declined until volume concentration factor(VCF) reached around 1.55 and membrane wetting started over VCF over 1.6 in the formation of precipitates containing $CaSO_4$ during VMD operation. In contrast, when calcium carbonate formed on membrane, permeate flux was gradually reduced until VCF 3.0. The precipitates containing both $CaSO_4$ and $CaCO_3$ were formed on the membrane surface and in the membrane pore.

• Resources Recycling
• /
• v.7 no.5
• /
• pp.33-40
• /
• 1998

The formation reation of anhydrite (CaSO$_{4}$) depends upon the amount and velocity of the SO$_{3}$(g) and CaO(s) produced in the process of the thermal decomposition of alunite[K$_{2}SO_{4}{\cdot}Al_{2}(SO_{4})_{3}{\cdot}4Al(OH)_{3}$] and limestone (CaCO$_{3}$) respectively. Therefore, this study had carried out to investigate the amount and velocity of SO$_{3}$(g) produced by roasting alunite and pyrolytic materials. In air, alunite was transfouned into KAl(SO$_{4})_{2}$ and Al$_{2}O_{3}$ by dehydration at 500~580$^{\circ}C$. The dehydration velocity of alunite was found to be kt=(1-(1-${\alpha})^{1/3})^{2}$, the activation energy, 73.01 kcal/mol. SO$_{3}$(g) ware slowly produced by the thermal decomposition of KAl(SO$_{2})_{2}$, at 580~700$^{\circ}C$, rapidly, at 700~780$^{\circ}C$, The pyrolysis velocity of KAl(SO$_{4})_{2}$ was found to be kt=1-(1-${\alpha})^{1/1}$; activation energy, 66.84kcal/mol. The SiO$_{2}$ and kaolinite in alunite ore scarcely affected the temperature and velocity in which SO$_{3}$(g) were produced.

• Journal of the Korean Ceramic Society
• /
• v.38 no.2
• /
• pp.183-192
• /
• 2001

산업부산물을 이용하여 3CaO.3Al$_2$O$_3$.CaSO$_4$(C$_4$A$_3$S) 클링커를 합성하였다. 이때, 원료 물질은 산업부산물로 플라이 애쉬, 고로 수쇄 및 괴재슬래그를 $Al_2$O$_3$원으로 그리고 부산석고를 SO$_3$원으로 이용하였으며, CaO원으로 천연석회석을 사용하였다. 제조된 $C_4$A$_3$S 클링커를 CaSO$_4$, CaO를 배합하여 CSA계 팽창재를 제조하였으며, 일반 포틀랜드 시멘트(OPC)에 10 wt.% 첨가하여 수화 및 물성 특성을 조사하였다. 주요 수화생성상은 에트링자이트 및 수산화칼슘이었다. 수화시 에트링자이트의 생성으로 인해 팽창 및 경화체가 치밀화되어 건조수축이 감소되었고, 강도(압출, 인장, 휨)가 향상되었다.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.3
• /
• pp.162-170
• /
• 1998

Geochemical characteristics of groundwater in Goryeong area, based on chemical analyses of 34 water samples and mineralogical study of rocks, differ among Nagdong, Hasandong and Jinju formations and Goryeong granite in relation to mineralogical compositions of the rocks. Concentrations of most solutes are higher in groundwater of the sedimentary formations than in that of granite. Ca$\^$2＋/ in the sedimentary groundwaters results mainly from reaction of CO$_2$-charged water with calcite and weathered plagioclase. Average groundwater in the Jinju formation is oversaturated with respect to calcite. Major types of groundwaters are hard Ca(HCO$_3$)$_2$ and CaSO$_4$with hardness of 155 mg/1 for Nagdong formation, 150 mg/1 for Hasandong formation and 140 mg/1 for Jinju formation whereas it is soft Ca(HCO$_3$)$_2$with hardness of 90 mg/1 for Goryeong granite. Ca(HCO$_3$)$_2$type resole from dissolution of calcite and plagiodase while CaSO$_4$type results from dissolution of pyrite and partly from domestic pollutants. CaSO$_4$type may indicate that the sedimentary groundwaters are more evolved geochemically than the granitic groundwater, but it is not obvious because the type might be affected by the dissolution of pyrite and domestic pollutions. Prite is expected to occur as a stable sulfide in the gray∼dark gray arkosic sandstones formed under reducing environment.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.2
• /
• pp.54-60
• /
• 2023

In this study, microstructure and basic property analysis of DG (Desulfurization gypsum) and CCMs (Carbondioxide conversion capture materials) made by reacting CO₂ with DG were conducted to analyze applicability as a cement admixture. The main crystalline phases of DG were CaO and CaSO₄, and CCMs were CaSO₄, CaCO₃, Ca(OH)₂ and CaSO₄·H₂O. As a result of particle size analysis, the difference in average particle sizes between the two materials was about 7 ㎛. No major heavy metals were detected in the CCMs, and as a result o f TGA, the CO₂ decomposition of CCMs was more than twice as high as that of DG. Therefore, it was judged that CCMs could be used as a cement admixture through optimization of manufacturing conditions. As a results of measuring the strength behavior of DG and CCMs mixture ratios, the long-term strength of CCMs-mixed mortar was higher, and this is due to the filler effect of CaCO₃ in CCMs.

• Journal of Environmental Science International
• /
• v.5 no.6
• /
• pp.739-748
• /
• 1996

This study was carried out to investigate the chemical characteristics ol rainwater sampled in Cheju City from July 1994 to June 1996. Concentrations of major ions (Cl-,$SO_4^{2-}$, NO_3^-$, $Na^+$, $K^+$, Ca^{2+}$, $Mg^{2+}$ and NH_4^+$) were determined. The pH of rainwater, calculated from the volume weighted H+ concentration, was found to be 5.61, indicating extensive neutralization of the acidity in the rain. The relative magnitude of average ionic concentrations followed the relation Cl-> $SO_4^{2-}$) $Na^+$> Ca^{2+}$> NH_4^+$> NO_3^-$> $Mg^{2+}$> $K^+$. The ions associated with sea salt, namely $Na^+$ and $Cl^-$, dominated the total concentration of ions in the rainwater and the $SO_4^{2-}$ ion accounts for 20% of total concentration. [H+][nss-SO42-+NO3] ratio and a multiple regression for $SO_4^{2-}$ and NO3- ions against $H^+$, $Ca^{2+}$ and $NH_4^+$ suggested that all of $SO_4^{2-}$ and $NO_3^-$ in rainwater was not necessarily associated with $H_2SO_4$ and $HNO_3$, but might also occur in combination with $NH_4^+$ or Ca^{2+}$. The monthly mean concentrations of $SO_4^{2-}$-, Ca^{2+}$ and $NH_4^+$ in spring time was higher than those in other seasons. These results may De attributed to the fertilizer application as the local sources and the yellow sand phenomina as a regional-scale sources.

• Journal of radiological science and technology
• /
• v.22 no.1
• /
• pp.55-60
• /
• 1999

In this study, the highly sensitive $CaSO_4:Tb$ glass capsule type TLDs are fabricated and their trap parameters are determined. The optimum conditions of fabricating of $CaSO_4:Tb$ phosphor was obtained to be in impurity concentration of Tb 1.0 mol% and sintering of $600^{\circ}C$, 2 hr. The glow curve of $CaSO_4:Tb$ consists of three glow peaks and these peaks are isolated by thermal bleaching method. Activation energy of the three glow peaks measured by the initial rise, the peak shape and the heating rate method are 0.70, 0.87, and 1.03 eV. The frequency factors are $1.76{\times}10^9,\;1.74{\times}10^9$, and $9.77{\times}10^8\;s^{-1}$, and the kinetic orders are 1.12, 1.46, and 1.34, respectively. The isolated glow peaks are fitted by least square method and optimum temperature range of the main peak for radiation dosimetry is $230{\sim}295^{\circ}C$.

• Journal of radiological science and technology
• /
• v.14 no.1
• /
• pp.49-60
• /
• 1991

Thermoluminescent phosphors, which are now being used widely in radiation dosimetry, have an excellent sensitivity to ionizing radiation. In this study, thermoluminescent phosphors of $CaSO_4$ : Mn, $CaSO_4$ : Dy and $CaSO_4$ : Tm are prepared and their physical properties are investigated by measuring the trapping parameters and their luminescent spectra. By considering the sensitivity to X-ray and fading characteristics, $CaSO_4$ : Dy is most adequate to imaging plate. The imaging plate are prepared by coating the $CaSO_4$ : Dy powder on the Al substrate and its dose dependence is linear within the range of 40 mGy-20 Gy X-ray. The sensitivity of imaging plate depends linearly on the thickness of coated phosphor layer up to $35\;mg/cm^2$ and is independent on the grain size of the phosphor in the range of $70{\sim}250\;{\mu}m$. By photographing the imaging plate, X-ray images of the test object are obtained and better than those of X-ray films.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.118-118
• /
• 2003

편의와 fresh-like quality를 선호하는 소비 경향에 맞추어 가공한 fresh-cut사과의 선도 연장을 위한 저해제를 탐색하였다. 실험에 사용된 사과는 박피하여 속심을 제거한 사과를 8조각으로 절단하여 저해제에 3분간 침지한 후 물기를 제거하고 각각 LDPE 포장지에 포장하여 실온에서 저장하면서 colorimeter와 rheometer를 이용하여 색도와 물성을 측정하였다. 저해제로는 1% ascorbic acid, citric acid, NaCl, MgCl$_2$, CaCl$_2$, KCl, CaSO$_4$, MgSO$_4$, $Na_2$SO$_4$, oxalic acid, calcium lactate, calcium citrate를 사용하였으며 천연저해제로는 건칡, 맥문동, 목향, Rhubarb, 당귀, 오약, 시체, 지각, 천문동, 청피, 계피, 구기자, 당귀, 진피, 감초, 녹차, 후추 등을 열수추출하여 사용하였다. 물리적인 변화는 시간이 경과함에 따라 감소하는 추세를 보였으며 일부 건조로 인해 texture의 증가를 나타내기도 했다. 처리에 따른 물리적인 변화로는 CaCl$_2$, NaSO$_4$, Cl, 시금치를 처리하였을 때 그 변화가 가장 작았으나 시금치의 경우 시금치로 인한 사과의 색변화로 관능적으로 좋지 않았다. 한약재는 목향, 당귀, 지각, 계피를 처리하였을 때 물리적인 변화가 가장 작았으나 시금치와 마찬가지로 처리 초기에 한약재 자체의 향과 색으로 인하여 관능적으로 좋지 못한 결과를 나타냈다. 갈변 정도를 나타내는 ΔE의 변화는 KCl과 CaCl$_2$, CaSO$_4$를 처리한 구에서 변화가 가장 작았으며 한약재를 처리하였을 경우 당귀, 천문동을 처리한 구에서 효과를 보였다. oxalic acid는 갈변저해에는 효과적이었으나 시간이 경과함에 따라 수분의 용출이 증가하였으며 물성의 변화도 컸다. 또한 ZnCl$_2$를 처리한 구에서는 이취 발생과 수분 용출이 컸으며 색의 변화도 컸다.