• Journal of Environmental Health Sciences
• /
• v.49 no.5
• /
• pp.251-261
• /
• 2023

Background: This paper deals with the study of natural radioactivity in rocks from Ogun State in Southwestern Nigeria. The aim is to determine radiation emissions from rocks in order to estimate radiation hazard indices. Objectives: The following objectives were targeted: 1. To determine radiation emissions from each type of rocks; 2. To estimate radiation hazard indices based on the rocks; 3. To correlate the activity concentrations of radionuclides with major oxides. Methods: The samples were analyzed using a NaI (Tl) gamma ray spectrometric detector and PerkinElmer AAnalyst 400 AAS spectrometer. Results: The activity of ⁴⁰K, ²²⁶Ra, and ²³²Th were found in order of decreasing magnitude from pegmatite>granite>migmatite. In contrast, lower concentrations were found in shale, phosphate, clay stone, sandstone and limestone. The mean absorbed doses were 125±23 nGyh^-1 (migmatite), 74±13 nGy/h (granite), 72±13 nGyh^-1 (pegmatite), 64±09 nGyh^-1 (quartzite), 45±16 nGyh^-1 (shale), 41±09 nGyh^-1 (limestone), 41±11 nGyh^-1 (clay stone), 24±03 nGyh^-1 (phosphate), and 21±10 nGyh^-1 (sandstone). The outdoor effective dose rates in all rock samples were slightly higher than the world average dose value of 0.34 mSvy^-1. The percentage composition of SiO₂ in the rock samples was above 50 wt% except for in the limestone, shale and phosphate. Al₂O₃ ranged from 4.10~21.24 wt%, Fe₂O₃ from 0.39~7.5 wt%, and CaO from 0.09-46.6 wt%. In addition, Na₂O and K₂O were present in at least 5 wt%. Other major oxides, including TiO₂, P₂O₅, K₂O, MnO, MgO and Na₂O were depleted. Conclusions: The findings suggest that Ogun State may be described as a region with elevated background radiation. It is recommended that houses should be constructed with good cross ventilation and residences should use home radiation monitoring instruments to monitor radon emanating from walls.

• The Journal of the Petrological Society of Korea
• /
• v.12 no.1
• /
• pp.32-52
• /
• 2003

The Mt. Baegyang in Busan, composed of sedimentary basement rocks (Icheonri Formation), andesite (lava), andesitic pyroclastic rocks, fallout tuff and tuffaceous sedimentary rocks, rhyolitic pyroclastic rocks, intrusive rocks (granite-porphyry, felsite, and biotite-granite) of Cretaceous age in ascending order. The volcanic rocks show a section of composite volcano which comprised alternation of andesitic lava and pyroclasitc rocks, rhyolitic pyrocalstic rocks (tuff breccia, lapilli tuff, fine tuff) from the lower to the upper strata. From the major element chemical analysis, the volcanic and intrusive rocks belong to calc-alkaline rock series. The trace element composition and REE patterns of volcanic and plutonic rocks, which are characterized by a high LILE/HFSE ratio and enrichments in LREE, suggest that they are typical of continental margin arc calc-alkaline rocks produced in the subduction environment. Primary basaltic magma might have been derived from partial melting of mantle wedge in the upper mantle under destructive plate margin. Crystallization differentiation of the basaltic magma would have produced the calc-alkaline andesitic magma. And the felsic rhyolitic magma seems to have been evolved from andesitic magma with crystallization differentiation of plagioclase, pyroxene, and hornblende.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.199-199
• /
• 2016

Commercially pure titanium (cp-Ti) and Ti alloys (typically Ti-6Al-4V) display excellent corrosion resistance and biocompatibility. Although the chemical composition and topography are considered important, the mechanical properties of the material and the loading conditions in the host have, conventionally. Ti and its alloys are not bioactive. Therefore, they do not chemically bond to the bone, whereas they physically bond with bone tissue. The electrochemical deposition process provides an effective surface for biocompatibility because large surface area can be served to cell proliferation. Electrochemical deposition method is an attractive technique for the deposition of hydroxyapatite (HAp). However, the adhesions of these coatings to the Ti surface needs to be improved for clinical used. Plasma electrolyte oxidation (PEO) enables control in the chemical com position, porous structure, and thickness of the $TiO_2$ layer on Ti surface. In addition, previous studies h ave concluded that the presence of $Ca^{+2}$ and ${PO_4}^{3-}$ ion coating on porous $TiO_2$ surface induced adhesion strength between HAp and Ti surface during electrochemical deposition. Silicon (Si) in particular has been found to be essential for normal bone and cartilage growth and development. Zinc (Zn) plays very important roles in bone formation and immune system regulation, and is also the most abundant trace element in bone. The objective of this work was to study electrochemical characteristcs of Zn and Si coating on Ti-6Al-4V by PEO treatment. The coating process involves two steps: 1) formation of porous $TiO_2$ on Ti-6Al-4V at high potential. A pulsed DC power supply was employed. 2) Electrochemical tests were carried out using potentiodynamic and AC impedance methoeds. The morphology, the chemical composition, and the micro-structure an alysis of the sample were examined using FE-SEM, EDS, and XRD. The enhancements of the HAp forming ability arise from $Si/Zn-TiO_2$ surface, which has formed the reduction of the Si/Zn ions. The promising results successfully demonstrate the immense potential of $Si/Zn-TiO_2$ coatings in dental and biomaterials applications.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.1
• /
• pp.95-100
• /
• 1994

This experiment was conducted to study the growth characteristics and organic and inorganic components in 28 local cultivars of Artemisia sp. The early growth of lndossuk and Siljebissuk was vigorous, while the fresh weight of Hwanghaessuk was the highest in 28 local cultivars as the amount of post growth was increased. Siljebissuk and Hwanghaessuk had a commercial worth as the good flavour with thin stem in early planting culture. Sanssuk, Hwanghaessuk and Sijebissuk were contained high percentage of Carbohydrate, Fe and Cu, while Pangssuk, Meongcheonssuk and Keunjebissuk was contained high percentage of $P_2O_5$ and MgO. There is no significance between the fresh weight of aerial part and inorganic componets but the correlation between CaO and fresh weight was signficant.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.E1
• /
• pp.1-7
• /
• 2001

The elemental characteristics of atmospheric aerosols were investigated as a function of particle size and water solubility. The aerosol particles were samples at 12 individual size ranges between 0.01 and 30㎛. Collected aerosol particles were separated into both soluble and insoluble components. The concentrations of 15 elements in both components were determined by a PIXE analysis using a 2.0 MeV-proton beam. In general, the mass size distribution of particulate matter was represented as a bimodal distribution. The maximum rations of S in July and December were 5.5 and 3.8 %, and they appeared in the size range of 0.47∼1.17㎛(stage No. 6 or 7) . The ratios of a S at non-separated size were 3.1 and 2.2 % in July and December, respectively, On the other hand, the maximum rations of Si in July and December were 7.0 and 5.4% and they appeared in the size range of 5.1∼30㎛(stage No. 0∼2). The ratios of Si at the non-separated size were 2.1 and 1.8% in July and December, respectively, The mass diameter of 12 elements ranged between 0.59㎛ of S and 3.20 of Fe. More than 90% of atmospheric aerosols consisted of the light elements such as C, N, O, H and Al. The soluble component was dominant in the smaller size range and the insoluble component in the larger size range. Large portions of Si. Ti and Fe existed in insoluble state. By contrast, S, Cl, Ca, Zn and Br were dissolved in water.

• Journal of the Korean Chemical Society
• /
• v.66 no.2
• /
• pp.78-85
• /
• 2022

Natural white clay was treated with 6 M of H₂SO₄ and heated at 80℃ for 6 h under mechanical stirring and the resulting acid active clay was used as an adsorbent for the removal of Cs⁺ in water. The physicochemical changes of natural white clay and acid active clay were observed by X-ray Fluorescence Spectrometry (XRF), BET Surface Area Analyser and Energy Dispersive X-line Spectrometer (EDX). While activating natural white clay with acid, the part of Al₂O₃, CaO, MgO, SO₃ and Fe₂O₃ was dissolved firstly from the crystal lattice, which bring about the increase in the specific surface area and the pore volume as well as active sites. The specific surface area and the pore volume of acid active clay were roughly twice as high compared with natural white clay. The adsorption of Cs⁺ on acid active clay was increased rapidly within 1 min and reached equilibrium at 60 min. At 25 mg L^- of Cs⁺ concentration, 96.88% of adsorption capacity was accomplished by acid active clay. The adsorption data of Cs⁺ were fitted to the adsorption isotherm and kinetic models. It was found that Langmuir isotherm was described well to the adsorption behavior of Cs⁺ on acid active clay rather than Freundlich isotherm. For adsorption Cs⁺ on acid active clay, the Langmuir isotherm coefficients, Q, was found to be 10.52 mg g^-1. In acid active clay/water system, the pseudo-second-order kinetic model was more suitable for adsorption of Cs⁺ than the pseudo-first-order kinetic model owing to the higher correlation coefficient R² and the more proximity value of the experimental value q_e,exp and the calculated value q_e,cal. The overall results of study showed that acid active clay could be used as an efficient adsorbent for the removal of Cs⁺ from water.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2001.06a
• /
• pp.58-59
• /
• 2001

부산에서 북동쪽으로 대략 25km 떨어진 지점에 위치하고 있는 일광광산 부근의 지질은 백악기 화산암ㆍ퇴적암 그리고 이를 관입한 화강암류와 이 암주 내에 발달하는 구리-중석을 함유하고 있는 각력파이프광상으로 이루어져 있다. 일광광산의 화강암류는 거의 타원형으로 felsic한 중앙부와 mafic한 양상의 주변부로 나뉘어지며, 암주 내에 수직적인 원통형의 각력파이프가 광화대를 이루고 있고, 그 주변에는 모암변질대가 발달되어 있다. 각력파이프를 충진하고 있는 vein과 화강암의 중앙부에는 전기석이 풍부하게 산출되고 있다. 일광광산에서 산출되는 전기석은 야외 관찰시 각력파이프 중심에서부터 외곽부쪽으로 전기석의 풍부함이 감소하며 산출형태도 달라진다. 파이프에서 대략반경 150m내에서 전기석은 침상형 의 방사상 모양 내지 rosettes형으로 풍부하게 산출되며, 화강암내의 mafic한 암편을 치환한 형태로 산출되기도 한다. 암주의 중앙부 주변부에서는 거의 미세한 구상형으로 산재되어 나타나고 있다. 전기석은 복잡한 화학식 {(Na, Ca)(Fe, Mg)$_3$(Al, Li)$_{6}$(BO$_3$)$_3$Si$_{6}$O$_{18}$ (OH, F)$_4$}을 갖는 붕산 규산염광물이다. 이러 한 다양한 성분은 마그마의 진화과정, 모암의 특성, 온도, 압력, 성분과 같은 물리ㆍ화학적 성질에 따라 전기석의 성분이 체계적으로 변하기 때문에 모암과 전기석 기원과의 상관관계를 파악할 수 있다. 파이프 부근의 화강암류는 현미 경상에서 전기석이 석류석과 같이 풍부하게 나타나며 장석들은 변질받은 상태로 세리사이트, 녹렴석으로 나타나고, 흑운모와 각섬석은 녹니석화되어 변질된 상태를 보이고 있다. 파이프 중심에서 외곽부로 갈수록 전기석의 함량은 줄어들고 있고 장석들이 알바이트ㆍ칼스베드 쌍정을 보이며, 흑운모가 각섬석보다는 우세하게 나타나고 있다. 전기석은 주상 결정, 자형 내지 반자형의 입자로 다색성을 보이며, 결정 중심에서 가장자리로 갈수록 파란색과 황갈색의 광학적 누대구조를 관찰할 수 있다. 일광광산에서 산출되는 전기석에 대한 현미경 관찰은 열수기원임을 지시하고 있다. 야외조사와 현미경 관찰의 예비조사에 의하면 일광광산의 전기석이 형성된 환경은 다른2가지 화학적인 저장소의 혼합 효과의 결과로 생성되어진 것으로 예상된다. 일광의 화강암류를 만든 마그마는 전기석을 형성할 만큼의 Fe-Mg성분이 충분하지 않았을 것이다. 화강암 내에 흑운모와 각섬석의 결정작용에 의해 마그마의 Fe-Mg성분이 고갈되어지고 이로 인해 그 함량이 감소하며 상대적으로 마그마 내에 남은 붕소(B$_2$O$_3$)는 열수로 용리되고 흑운모, 각섬석과 평형을 유지하며 열수에 남아있게 된다. 잔류용융체에 남은 붕소의 함량은 전기석을 만들기에 충분함에도 불구하고, Fe-Mg 함량이 부족하여 마그마 기원의 전기석 결정을 만들 수가 없다가 광맥이 형성된 시기에 또 다른 열수가 공급되면서 이전의 평형이 깨지고 기존의 흑운모와 같은 염기성 광물이 붕소(B)를 함유한 새로운 열수와 반응하여 전기석을 형성한 것으로 예상한다. 앞으로 전암과 광물에 대해 지화학적 연구를 통해 화강암류와 전기석과의 지화학적 연관성, 주성분 원소와 열수의 특성과의 상관관계, 전기석의 기원(마그마 기원인지 열수기원인지)이 보다 정확하게 파악될 것이다. 마그마 진화에 따른 전기석의 성분변화와 기원을 이용하여 일광광산의 동광화대를 형성한 마그마 계에서 열수계로 이어지는 지질학적 과정을 이해할 수 있을 것이며, 암석 성인론적 지시자로서 어떠한 중요성을 갖는지 논의되어질 수 있다.

• Economic and Environmental Geology
• /
• v.45 no.1
• /
• pp.9-21
• /
• 2012

In this study, we investigated the chemical characteristics of soils collected from the several deserts and loess in China known as the typical source areas of Asian dust (the Taklamakan desert, the Alashan desert, the Ordos desert and the Loess Plateau). Based on our analysis, we examined the possibility of adverse effects on environments and human health. In each desert and loess, major elemental compositions of soils did not show large variations, implying that the long-periodic mixing of soils in each area made their chemical compositions homogeneous. Minor elements of soils in each desert and loess showed more complicated patterns with strong correlations each other (e.g., Cr, Cu, As, Co, Ni, V, Y, Sc, Sn, Pb, Zn, Cd, Cs, Li, Th, U). These results thus enable us to discriminate the soil of the Loess Plateau from those of the other deserts in China. The results of sequential extraction experiments for soils showed that the chemical speciation of Fe was dominant in residual fraction (>85%) in all deserts and loess, but the fractions of Mn and Ca chemical speciations were very different in each area. In the case of Mn, the fraction of amorphous Fe-Mn hydroxides (55.4%) in the Central Loess Plateau and the carbonate fraction (33.8%) in Taklamakan desert were higher as much as 2 to 5 times than other deserts. The chemical speciations of Ca are dominant in carbonate fraction in Taklamakan (75.9%) and Alashan (50.5%) deserts, but carbonate fractions of Ca in the Loess Plateau and Ordos deserts were low (6.6% and 2.1%, respectively). According to the mobility of trace elements inferred from the results of sequential extraction procedure, we could classify them into five groups, and the mobility of Cd, Pb and Cu are more than 87%, 33% and 30%, respectively. Therefore, Cd, Pb and Cu in soils of deserts and loess could be easily dissolved when interacted with surface water. As such, they could give adverse effects on surficial environments and human health.

• Journal of the Mineralogical Society of Korea
• /
• v.4 no.1
• /
• pp.1-10
• /
• 1991

Tosudite from the Sungsan mine, Korea is an alteration product of rhyolitic tuff in the cretaceous Hwangsan Formation. It is associated with illite, dickite, nacrite or quartz and also found in the cavities of black claystone. X-ray diffraction and chemical analyses show that the Sungsan tosudite is a lithium-bearing aluminous 1:1 regularly interstratified mineral of di, dioctahedral chlorite and smectite. Its structural formula is $(K_{0.73}Na_{0.02}Ca_{0.07})(Si1_{13.23}Al_{2.77})(Li_{0.52}Mg_{0.08}Mn_{0.01)Fe^{3+}_{0.07}Al_{12.33})O_{40}(OH)_{20}$ and it suggests that Sungsan tosudite consists of regularly interstratified Li-donbassite and beidellite. DTA and TG curves as well as IR absorption data also support such a result. Temperature of formation of tosudite is inferred to be between $110{\circ}$ and $270{\circ}C$.

• The Journal of the Petrological Society of Korea
• /
• v.4 no.1
• /
• pp.31-48
• /
• 1995

The Jurassic Kwanaksan stock, so far known to be composed of biotite granite only, has the mineral assemblage of quartz+K-feldspar+plagioclase+biotite${\pm}$gernet. The lithology of the stock is classified as alkali feldspar granite by their mode and plagioclase compositions (An<5). Subsolvus feldspars, rather early crystallization of biotite, and shallow emplacement depth estimated from Q-Ab-Or diagram suggest hydrous nature of the magma, which contrasts with anhydrous A-type like geochemistry described below. Major and trace element compositions of the Kwanaksan stock are distinct from those of the adjacent Seoul batholith, suggesting a genetic difference between the two, The Kwanaksan stock shows geochemical characteristics similar to A-type granite in contrast to most other Mesozoic granites in Korea, in that it has high $SiO_2$(73~78wt%), $Na_2O+K_2O$, Ga(27~47 ppm). Nb(22~40 ppm), Y(48~95 ppm), Fe/Mg and Ga/Al, and low CaO(<0.51 wt%). Ba (8~75 ppm) and Sr(2~23 ppm). However, it has lower Zr and LREE and higher Rb(384~796 ppm) than typical A-type granite. LREE-depleted rare earth element pattern with strong negative Eu anomaly of previous studies is reinterpreted as representing source magma characteristics. The residual material during partial melting is not compatible with pyroxenes, amphibole or garnet, while significant amount of plagioclase is required. Similarity of geochemistry of the Kwanaksan stock to A-type granite suggests the origin of the stock has a chose relationship with that of A-type granite. These observations lead us to propose that the Kwanaksan stock was formed by partial melting of felsic source rock.