• Journal of Bio-Environment Control
• /
• v.20 no.3
• /
• pp.221-226
• /
• 2011

The study was carried out to investigate the effect of MA packaging materials on quality and storability of tomato in long distance export condition. We found that the fresh weight loss in perforated film was higher than other breathable films. The fresh weight of tomato (cv 'Madison') packaged with breathable films, such as 5,000 cc, 10,000 cc, $20,000cc/m^2{\cdot}day{\cdot}atm$ oxygen permeable films, reduced less than 0.6%, but perforated film that already being used for packaging horticultural crops showed 1.4% fresh weight loss during $5^{\circ}C$ storage for 20 days and then $20^{\circ}C$ storage for last 5 days with 85% relative humidity. The carbon dioxide and oxygen concentration in tomato packages showed proper level for MA storage in $20,000cc/m^2{\cdot}day{\cdot}atm$ $O_2$ breathable film treatment at $5^{\circ}C$ storage. Although at $20^{\circ}C$ storage, the carbon dioxide concentration increased sharply, the oxygen concentration decreased remarkably, the change of these gases concentration was the lowest in 20,000 cc film treatment. The ethylene concentration was sharply increased at $20^{\circ}C$ from $21^{st}$ day to $25^{th}$ day after $5^{\circ}C$ storage for 20 day, and the concentration was lower in 20,000 cc film treatment among the breathable film treatments. Until 20 days, at $5^{\circ}C$ storage all treatments did not exceed the marketability. However, the last 5 days during at $20^{\circ}C$, the fruit appeared fungal rots and the quality rapidly decreased. The $20,000cc/m^2{\cdot}day{\cdot}atm$ $O_2$ permeability treated tomato performed higher firmness (9.56 N), vitamin C (16.31 mg/100 gFW), and soluble solids ($7^{\circ}Brix$) than other breathable films at final storage day. The results suggest that the $20,000cc/m^2{\cdot}day{\cdot}atm$ $O_2$ permeable film treatment of tomato (cv 'Madison') performed the highest quality and storability of tomato for long distance exporting.

• Korean Journal of Materials Research
• /
• v.27 no.11
• /
• pp.603-608
• /
• 2017

$Si_3N_4$ is a ceramic material attracting attention in many fields because of its excellent abrasion resistance. In addition, Ti and TiAl alloys are metals used in a variety of high temperature environments, and have attracted much attention because of their high strength and high melting points. Therefore, study of the interface reaction between $Si_3N_4/Ti$ and $Si_3N_4/TiAl$ can be a useful practice to identify phase selection and diffusion control. In this study, $Si_3N_4/Ti_5Si_3+TiN/TiN/Ti$ diffusing pairs were formed in the $Si_3N_4/Ti$ interfacial reaction and $Si_3N_4/TiN(Al)/Ti_3Al/TiAl$ diffusion pathway was identified in the $Si_3N_4/TiAl$ interfacial reaction. The diffusion layers of the interface reactions were identified and, to investigate the kinetics of the diffusion layer, the integrated diffusion coefficients were estimated.

• Applied Biological Chemistry
• /
• v.25 no.3
• /
• pp.126-134
• /
• 1982

When $^{14}C-2$, 6-Diethylaniline (2, 6-DEA) was incubated aerobically in soil, $^{14}CO_2$ evolved from non-sterile soil A and B was 6.5 and 10.1%, respectively, in the 21st week. Methanol could extract 3.1 and 13.5% of the radioactivity from soil A and B, respectively, 2, 6-Diethylacetanilide was detected as a degradation product in soil. Chaetomium globosum produced 2, 6-diethyl-p-benzoquinone as a degradation product in pure culture. A possible pathway was proposed to include p-hydroxylation of 2, 6-DEA, formation of quinoneimine, and the subsequent hydrolysis with the release of ammonia.

• Journal of Korea Foundry Society
• /
• v.27 no.5
• /
• pp.221-223
• /
• 2007

공구강은 C, Cr, V, Mo, W, Co 및 Si 과 같은 첨가원소를 함유한 복잡한 철계 합금으로 주요 특성인 경도, 부식저항성, 열 연화저항성 그리고 인성의 요구수준에 따라 화학성분이 결정된다. 본 연구에서는 1.0C, 0.2Mn, 3.8Cr, 1.5W, 8.5Co, 9.2Mo, 1.0V 조성의 M42 공구강의 미세조직과 열간가공성에 미치는 Si 함량의 효과를 체계적으로 조사하였다. 진공유도용해를 이용하여 Si 함량을 중량비로 0.33 에서 1.7% 까지 변화시켜 $140{\times}140{\times}330\;mm^{3}$ 크기의 잉곳으로 제조하였다. 이렇게 제조한 잉곳들은 $1150^{\circ}C$에서 1.5시간 동안 용체화처리한 후 노냉하였고, 이어 $1180^{\circ}C$에서 15mm 두께의 판재로 열간압연하였다. 공정 탄화물의 형상 및 분해 거동을 중심으로 미세조직을 관찰한 결과 Si 함량이 증가함에 따라 분해속도가 느려지는 것을 알 수 있었고 이로 인해 열간성형성이 급격히 저하되는 것으로 나타났다.

• Korean Journal of Optics and Photonics
• /
• v.3 no.3
• /
• pp.178-182
• /
• 1992

An air-cooled discharge-heated copper-vapor laser system with its inter-electrode distance of 45 cm has been developed by utilizing an alumina ceramic plasma tube of 1.6 cm in diameter and 50 cm in lengih. For operating the laser, a dc high voltage power supply with output rating of 6 kV and 500 mA, a resonant charging circuitry consisting partly of an 1.8 H inductor assembly and a 5 nF storage capacitor, and a thyratron driver operating up to 7 kHz have also been developed. The present laser system starts lasing at the tube temperature of about $1350^{\circ}C$ and an maximum average output power of 0.7 W has been obtained at 12 kV, 4.5 kHz. 50 mbar of Ne buffer gas pressure, and at the tube temperature of $1460^{\circ}C$.

• Korean Journal of Ecology and Environment
• /
• v.34 no.1 s.93
• /
• pp.54-61
• /
• 2001

Changes in methanogenic pathway at low temperature were studied by incubation experiments of sediment slurries from the littoral zone of Reservoir Paldang. Methane production rates in sediment slurries increased exponentially between $5＾{\circ}C$and $45＾{\circ}C$, reached a maximum rate of $7.4\;nmol\;{\cdot}\;g^{-1}\;{\cdot}\;h^{-1}$ at $45＾{\circ}C$, and then declined to low rate. The shift of incubation temperature from high temperature ($30＾{\circ}C$) to lowtemperature ($15＾{\circ}C$) resulted in a decrease of methane production rate and of hydrogen accumulation rate, and the transient accumulation of acetate concentration. Chlorofarm inhibited perfectly methanogenesis and resulted in the accumulation of hydrogen and acetate as immediate precursors for metltane formation at both incubation temperatures of $15＾{\circ}C$ and $30＾{\circ}C$. In terms of equivalent methane which was calculated from the two intermediary metabolites accumulated in absence of methanogenesis, methane production from acetate was accounted for 14% of total methanogenesis at $30＾{\circ}C$ and 75% at $15＾{\circ}C$, respectively. When the high acetate concentrations above 19 mM were added to sediment slurries, methane production was inhibited at the low temperature ($15＾{\circ}C$) . Our results demonstrate that contribution of acetate on methanogenesis increases at low temperature, but this pathway is inhibited by high concentration of acetate. Therefore acetate-utilizing methanogensis appears to be a key reaction at low temperature, and seems to be one of bottlenecks of the low temperature anaerobic degradation of organic matter in littoral sediments of the reservoir.

• Childhood Kidney Diseases
• /
• v.17 no.1
• /
• pp.1-5
• /
• 2013

C3 glomerulonephritis (C3GN) is a recently described entity that shows a glomerulonephritis on light microscopy, bright C3 staining and the absence of C1q, C4, and immunoglobulins on immunofluorescence microscopy and mesangial and/or subendothelial electron-dense deposits on electron microscopy. The term 'C3 glomerulopathy' is often used to include C3GN and dense deposit disease (DDD), CFHR5 nephropathy, those of which result from dysregulation of the alternative pathway of complement. C3GN shares some aspects of atypical hemolytic uremic syndrome, MPGN, late stage of post infectious glomerulonephritis and other glomerulonephrtis. When C3GN is considered, measurement of serum complement proteins including C3, CFH, CFI, CFB and testing for the presence of C3 nephritic factor, anti-factor H autoantibodies are necessary. To screening for mutations, genes that encode complement regulators should be evaluated. This disorder equally affected all ages, both genders, and typically presented with hematuria and proteinuria. In both the short and long term, renal function remained stable in the majority of patients.

• Food Science and Preservation
• /
• v.17 no.5
• /
• pp.595-601
• /
• 2010

We investigated the effects of 1-methylcyclopropene (1-MCP) treatment (0, 0.5, and 1.5 ppm) for 16 hours, followed by storage at ambient temperature, on the qualities of pears (Pyrus pyrifolia c.v. "Hwasan"). Color differences, as measured using the Hunter L, a, and b values, showed the greatest decreases before storage, and 8 weeks after storage, when fruit was exposed to 1.5 ppm 1-MCP. The sensory qualities of c.v. "Hwasan" pears were good until 4 weeks of storage after treatment with 0 ppm 1-MCP, until 6 weeks when 0.5 ppm 1-MCP was employed, and until 7 weeks when 1.5 ppm 1-MCP treatment was performed. Fruit and storage quality in terms of all of hardness, sugar content, PPO activity, respiration amount, and ethylene production increased in the 8 weeks after application of 1.5 ppm 1-MCP. Consequently, it seems that 1-MCP treatment, especially at 1.5 ppm, before storage of pears at ambient temperature, effectively improves the quality of pears of c.v. "Hwasan".

• Journal of Power System Engineering
• /
• v.2 no.3
• /
• pp.49-54
• /
• 1998

This paper is investigated of hardness and adhesiveness of plasma sprayed coating steels by AE(Acoustic Emission) testing when loading a tensile. AE Parameters used are Event, Count, Energy and Amplitude. Test specimens are carbon steel(S45C) with sprayed coating layers of Ni-4.5wt.%Al(bond coating) and $TiO_2$(top coating), and carry out heat treatment at $800^{\circ}C\;and\;1000^{\circ}C$, respectively. The micro-hardness of the heat treatment specimen have been improved more than that of non-heat treatment. On the tensile test, the process and occurence of the exfoliation of the sprayed coating layer can be estimated by AE Characteristics of AE parameters, such as event, count, amplitude and energy, on the layer exfoliation are shown the similar aspects. The exfoliation of bond coating occure at about 20% of strain and top coating is about 5% of strain.

• Korean Journal of Microbiology
• /
• v.23 no.4
• /
• pp.302-308
• /
• 1985

It is shown by means of nuclear magnetic resonance spectroscopy that 3,4,5-trihydroxy-2-keto-L-valeraldehyde (L-xylosone), an ${\alpha}$-ketoaldehyde, is formed during the oxidative catabolism of L-ascorbic acid. It is proposed that this substance serves as a substrate for the glyoxalase system by which it is transformed to L-xylonic acid. As L-xylonic acid is further oxidized to L-erythroascorbic acid, a biochemical pathway is proposed for the action of vitamin C which consists of two further ${\gamma}$-lactones and three different substrates of the glyoxalase system.