• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 학술대회 논문집 전문대학교육위원
• /
• pp.138-140
• /
• 2007

$TiO_2-V_2O_5$ sol was fabricated using sol-gel method and $TiO_2-V_2O_5$ thin films were fabricated using dip-coating method. $V_2O_5$ sol was added 0.01mo1e, 0.03mo1e, 0.05mo1e into $TiO_2$ sol. Viscosity of sol increased fast from about 1,000 minutes and sol began gelation from about 10,000 minutes. As a results of crystalline properties, $V_2O_5$ peaks were not found despite of $V_2O_5$ addition. Endothermic reaction occurred due to evaporation of solvent and dissociation of OH at $80^{\circ}C$. Exothermic reaction occurred due to combustion and oxidation of solvent at $230^{\circ}C$, occurred to combustion and oxidation of alkyl group at $350^{\circ}C$. Thickness of thin films increased $0.1{\sim}0.25{\mu}m$ every a dipping.

• 한국표면공학회지
• /
• 제37권3호
• /
• pp.185-190
• /
• 2004

Plasma Display Panel is a display device emitting fluorescent light from gas discharge between a front and a rear panel sealed together. Front and rear panel have multitude of film layers and barrier ribs in the rear panel has the largest area so releasing various gases and affecting light emitting characteristics and lifetime. The remaining gases in a barrier rib were studied by thermal desorption analysis up to $400^{\circ}C$ and main gases were $H_2$ $H_2$O, CO. During sustaining at $300^{\circ}C$, the outgassing rates from other gases were decreased but$ H_2$ kept constantly increasing until 1 hour, which can be originated from the dissociation of organics remained in the inside of barrier rib material. In $H_2$O, two distinct peaks were observed: desorption from physically adsorbed one at $l00^{\circ}C$ and from chemically adsorbed one $400^{\circ}C$. The result can be utilized in interpretation of electronic and optical characteristics and evacuation process control of PDP

• 대한화학회지
• /
• 제44권5호
• /
• pp.403-409
• /
• 2000

1,4,7,10-tetraaza13,16-dioxacyclooctadecane-N,N',N",N'"-tetraacetic acid (1), 1,4,7,10-tetraaza-13,16-dioxactclootadecane-N,N',N",N'"-tramethylacetic acid (2), 및 1,4,7,10-tetraaza-13,16-dixacyclooc-tedecane-N,N',N",N'"-tetrapropionic acid (3)와 $Zn^{2+}$ 착물의 형성 및 해리 속도를 멈춤-흐름법 및 분광학적방법으로 측정하였다. 측정 조건을 온도 25.0$\pm$0.1 $^{\circ}C$ 및 이온강도 0.10 M NaClO4 이었다. $Zn^{2+}$이온과 1과 2의 형성 반응은 빠르게 중간 생성물($ZnH_3L^+$)를 형성한다. 여기서 $Zn^{2+}$ 이온은 부분적으로 배위되어 있고 속도 결정 단계는 최종 생성물이었다. pH범위 4.76-5.76에서, 2가 양성자($H_2L^{2-}$) 형태가 매우 낮은 농도임에도 불구하고 속도론적으로 활성화종임을 알 수 있었다. 또한 중간체 착물의 안정도 상수(log$K_{(ZnH_3L^+)}$)와 고유 물분자-보조 속도상수(KOH)가 속도론적 자료로부터 계산되었다. $Zn^{2+}$이온과 1,2, 및 3의 해리 반응은 아세테이트 완충 용액 하에서 청소군 $Cu^{2+}$ 이온을 이용하여 측정하였다. 모든 착물의 해리 반응은 산-무관 및 산-촉매 반응으로 진행됨을 알 수 있었다. $Zn^{2+}$ 착물의 해리 속도에 영향을 미치는 완충 용액 및 $Cu^{2+}$농도의 효과를 알아보았으며, 아울러 리간드 효과를 곁가지에 매달려있는 치환기와 킬레이트 고리크리로 논하였다.

• Bulletin of the Korean Chemical Society
• /
• 제26권11호
• /
• pp.1711-1716
• /
• 2005

Fragmentations and ion-molecule reactions of ionized cyclohexane propionic acid and cyclohexane butyric acid were studied using FTMS and theoretical calculations. The difference in bond dissociation depending on the aliphatic chain length was investigated and mechanisms for the possible rearrangements depending on the aliphatic carbon length were suggested. The most abundant fragment ion of the ionized cyclohexane propionic acid was c-$C_6H_{11}CH_2\;^+$ formed from the molecular ion by the direct C-C bond cleavage, while that of the ionized cyclohexane butyric acid was c-$C_6H_9C(OH)=OH^+$ formed by rearrangement of the molecular ion from the acid to diol form and loss of propyl radical. Stabilities of the radical and distonic ions of $C_nH_{2n}O^{+\bullet}$ formed from the molecular ion were compared. Protonated molecules were dissociated into smaller ions by losing one or two water molecules. The $[nM + H]^+$, $[nM + H - H_2O]^+$, and $[nM + H - 2H_2O]^+$ with n = 2 and 3 were generated by solvation with the neutral molecules in the ICR cell at long ion trapping time.

• Tribology and Lubricants
• /
• 제35권6호
• /
• pp.362-368
• /
• 2019

In this study, mechanical and tribological properties were investigated by varying the process temperature (50, 100, 125 and 150℃) to reduce internal stress. The internal stress reduction by thermal dissociation ta-C coating film with increasing temperature is confirmed through the curvature radius of the ta-C coating according to the temperature of the SUS plate. As the coating temperature increased, the mechanical properties (hardness, modulus, toughness) deteriorated, which is in agreement with the Raman analysis results. As the temperature increased, the sp² phase ratio increased owing to the dissociation of the sp³ phase. The friction and wear properties are related to the process temperature during ta-C coating. Low friction and wear properties are observed in high hardness samples manufactured at 50℃, and wear resistance properties decreased with increasing temperature. The contact area is expected to increase owing to the decrease of hardness(72 GPa to 39 GPa) and fracture toughness with increasing temperature which accelerated wear because of the debris generated. It was confirmed that at process temperature of over than 100℃, the bond structure of the carbon film changed, and the effect of excellent internal stress was reduced. However, the wear resistance simultaneously decreased owing to the reduction in fracture toughness. Therefore, in order to increase industrial utilization, optimum temperature conditions that reduce internal stress and retain mechanical properties.

• 한국재료학회지
• /
• 제4권1호
• /
• pp.9-23
• /
• 1994

Multitarget bias cosputter deposition(MBCD)에 의해 저온($200^{\circ}C$)에서 NaCI(100)상에 정합$CoSi_2$를 성장시켰다. X-선회절과 투과전자현미경에 의해 증착온도와 기판 bias전압에 따른 각각 silicide의 상전이와 결정성을 관찰하였다. Metal induced crystallization(MIC) 과 self bias 효과에 의해 $200^{\circ}C$에서 기판전압을 인가하지 않은 경우에도 결정질 Si이 성장하였다. MIC현상을 이론 및 실험적으로 고찰하였다. 관찰된 상전이는 $Co_2Si \to CoSi \to Cosi_2$로서 유효생성열법칙에 의해 예측된 상전이와 일치하였다. 기판 bias전압 인가시 발생한 이온충돌에 의한 충돌연쇄혼합(collisional cascade mixing), 성장박막 표면의 in situ cleaning, 핵생성처(nucleation site)이 증가로 인하여 상전이, CoSi(111)우선방위, 결정성은 증착온도에 비해 기판bias전압에 더 큰 영향을 받았다. $200^{\circ}C$에서 기판 bias전압을 증가시킴에 따라 이온충돌에 의한 결정입성장이 관찰되었으며, 이를 이온충독파괴(ion bombardment dissociation)모델에 의해 해석하였다. $200^{\circ}C$에서의 기판 bias전압증가에 따른 결정성변화를 정량적으로 고찰하기 위해 Langmuir탐침을 이용하여 $E_{Ar},\; \alpha(V_s)$를 계산하였다.

• Restorative Dentistry and Endodontics
• /
• 제27권6호
• /
• pp.632-643
• /
• 2002

The purpose of this study was two-fold. First was to evaluate whether the molecular sieving model was appropriate for ionic dissociation experiment. Second was to compare the dissociation of calcium and hydroxyl ions from five types of calcium hydroxide pastes (Pure calcium hydroxide paste, DT temporary $dressing^{\circledR},{\;}Metapaste^{\circledR},{\;}Chidopex^{\circledR},{\;}Metapex^{\circledR}$) in three vehicles (aqueous, viscous and oily) and the antibacterial effect. Each calcium hydroxide pastes was placed into 0.65ml tube with cap and then 15% polyacrylamide gel was placed onto calcium hydroxide pastes. After the gel was hardened, the tubes were filled with tridistilled water (pH 7.14) and closed with cap. The tubes were stored in $37^{\circ}C$ 100% incubator The pH reading and the concentration of calcium ions were taken at 1, 4, 7. 10, and 14 days. The brain heart infusion agar plates with S. mutans and A. actinomycetemcomitans were used far antibacterial activity test. Middle of agar plate was filled with the calcium hydroxide pastes. The plates were incubated at $37^{\circ}C$ and observations were made to detect the zones of inhibition. These data were evaluated statistically by use of the analysis of variance and duncan test. The results were as follows. 1. In fresh mixing state, the pH of five types of calcium hydroxide pastes were measured between 12.5 and 12.8. 2. The pH was increased in all five types of calcium hydroxide pastes compared with control group. In 14 days, Pure calcium hydroxide paste (11.45) and DT temporary $dressing^{\circledR}$ (11.33) showed highest pH, followed by $Metapaste^{\circledR}$ (9.49), $Chidopex^{\circledR}$ (8.37) and $Metapex^{\circledR}$ (7.59) 3. Calcium was higher in all five types of calcium hydroxide pastes compared with control group. In 14 days, Pure calcium hydroxide paste (137.29 mg%) and DT temporary $dressing^{\circledR}$ (124.6 mg%) showed highest value, followed by $Metapaste^{\circledR}$ (116.74 mg%), $Chidopex^{\circledR}$ (111.84 mg%) and $Metapex^{\circledR}$ (60.22 mg%). 4. The zones of bacterial inhibition were seen around all five types of calcium hydroxide pastes. $Chidopex^{\circledR}{\;}and{\;}Metapex^{\circledR}$ groups which include iodoform were observed significantly larger zone of inhibition in A. actinomycetemcomitans compared with the other calcium hydroxide groups (p<0.05) However, $Metapex^{\circledR}$ showed the least antibacterial effect on S. mutans compared with other groups (p<0.05). The molecular sieving model was found to be acceptable in dissociation experiment of hydroxyl and calcium ions when compared with the previous tooth model study. But this model was not appropriate for the antibacterial test.

• Bulletin of the Korean Chemical Society
• /
• 제13권5호
• /
• pp.482-486
• /
• 1992

Ion-molecule reactions of acetylene and mixed acetylene-ammonia cluster ions are studied using an electron impact time-of-flight mass spectrometer. The present results clearly demonstrate that $(C_2H_2)_n^+$ cluster ion distribution represents a distinct magic number of n=3. The mass spectroscopic evidence for the enhanced structural stabilities of $[C_6H_4{\cdot}(NH_3)_m]^+$ (m=0-8) ions is also found along with the detection of mixed cluster $[(C_2H_2)_n{\cdot}(NH_3)_m]^+$ ions, which gives insight into the feasible structure of solvated ions. This is rationalized on the basis of the structural stability for acetylene clusters and the dissociation dynamics of the complex ion under the presence of solvent molecules.

• Bulletin of the Korean Chemical Society
• /
• 제22권9호
• /
• pp.969-974
• /
• 2001

Model calculations for small molecules Li2, F2, LiF and BF have been performed at the Dirac-Fock level of theory using Dirac-Coulomb and Dirac-Coulomb-Magnetic Hamiltonians with various basis sets. In order to understand what may happen when the relativity becomes significant, the value of c, speed of light, is varied from the true value of 137.036 a.u. to 105 (nonrelativistic case) and also to 50 and 20 a.u. (exaggerated relativistic cases). Qualitative trends are discussed with special emphasis on the effect of the magnetic part of the Breit interaction term. The known relativistic effects on bonding such as the bond length contraction or expansion are demonstrated in this model study. Total energy, $\pi-orbital$ splitting, bond length, bond dissociation energy and dipole moment are calculated, and shown to be modified in a uniform direction by the effect of the magnetic term. Inclusion of the magnetic term raises the total energy, increases the bond length, reduces the $\pi-orbital$ splitting, increases the bond dissociation energy, and mitigates the changes in dipole moment caused by the Dirac term.

• 한국재료학회지
• /
• 제14권4호
• /
• pp.265-269
• /
• 2004

Plasma nitrocarburising and post oxidation were performed on SCM435 steel by a pulsed plasma ion nitriding system. Plasma oxidation resulted in the formation of a very thin ferritic oxide layer 1-2 $\mu\textrm{m}$ thick on top of a 15～25 $\mu\textrm{m}$ $\varepsilon$-F $e_{2-3}$(N,C) nitrocarburized compound layer. The growth rate of oxide layer increased with the treatment temperature and time. However, the oxide layer was easily spalled from the compound layer either for both oxidation temperatures above $450^{\circ}C$, or for oxidation time more than 2 hrs at oxidation temperature $400^{\circ}C$. It was confirmed that the relative amount of $Fe_2$$O_3$, compared with $e_3$$O_4$, increased rapidly with the oxidation temperature. The amounts of ${\gamma}$'-$Fe_4$(N,C) and $\theta$-$Fe_3$C, generated from dissociation from $\varepsilon$-$Fe_{2-3}$ /(N,C) phase during $O_2$ plasma sputtering, were also increased with the oxidation temperature.e.