• Journal of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.248-258
• /
• 1986

The electronic structures and geometries of model substituted oxiranes, and carbonyl ylides containing cyano, methoxy and thiomethoxy substituents were investigated by MNDO-SCF-MO method. Stabilization and geometries caused by substituents, the ease of formation of carbonyl ylides from oxiranes and the reactivities of the cycloaddition of substituted carbonyl ylides were investigated.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.621-626
• /
• 2010

In this study, imidazole-based ionic liquid on polystyrene was prepared and its catalytic performance in the cycloaddition of $CO_2$ with allyl glycidyl ether(AGE) to produce allyl glycidyl carbonate was investigated. The ionic liquid was generated on the polystyrene-based polymer through the immobilization of imidazole. The prepared catalyst was characterized using a number of instrumental analysis including EA, FT-IR, TGA and SEM. The immobilized ionic liquid showed very good catalytic activity for the cycloaddition of $CO_2$ with AGE, having 80% of AGE conversion with over 96% of the carbonate selectivity at $120^{\circ}C$ under 1.48 MPa $CO_2$ pressure. The immobilized ionic liquid can be used for the reaction up to four consecutive runs without significant loss of its catalytic activity.

• Bulletin of the Korean Chemical Society
• /
• v.2 no.3
• /
• pp.112-114
• /
• 1981

The photocycloaddition reaction of 8-methoxypsoralen with purine and/or pyrimidine bases is studied as a model for the charge transfer interactions of psoralens with DNA bases by the FMO method. The results indicate that, in the case of the molecular complex formation between psoralens and purine and/or pyrimidine bases, the most probable photocycloaddition should occur in the following order: Thy (5,6)<>(3,4) 8-MOP, Cyt(5,6)<>(3,4)8-MOP, Ade (7,8)<>(3,4)8-MOP, Gua(7,8)<>(3,4)8-MOP. The theoretical results for the photocycloaddition reaction are also correlated with the experimental results. The photoadducts between 8-methoxypsoralen and adenine are likely to be C4-cycloadducts through the cycloaddition of 3,4-pyrone double bond of 8-methoxypsoralen to 7,8-double bond of adenine.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.4
• /
• pp.298-300
• /
• 1987

The theoretical studies on the photocycloaddition reaction of 5,7-dimethoxycoumarin and 4',5'-dihydropsoralen with thymidine were carried out as a model for photosensitizing reaction of psoralen with DNA. The results are in reasonable agreement with experimental observations. The photoadducts between dimethoxycoumarin and thymidine were predicted to be $C_{4}$-cycloadducts through the cycloaddition of 3,4-pyrone double bond of dimethoxycoumarin to 5,6 double bond of thymidine. The major photoadduct of 4',5'-dihydropsoralen with thymidine has the anti head-to-head stereochemistry.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.2
• /
• pp.102-105
• /
• 1987

2-Methoxy-6-methyl-3,4-dihydro-2H-pyran ($1_a$), 2-ethoxy-3,6-dimethyl-3,4-dihydro-2H-pyran ($1_b$), and 2-ethoxy-3-methyl-6-ethyl-3,4-dihydro-2H-pyran ($1_c$) were prepared by (4 + 2) cycloaddition reaction from the corresponding vinyl ketones and alkyl vinyl ethers. Compounds $1_{a-c}$ were ring-open polymerized by cationic catalyst to obtain alternating head-to-head (H-H) copolymers. For comparison, copolymer of head-to-tail (H-T) was also prepared by free radical copolymerization of the mixture of the corresponding monomers. The H-H copolymer exhibited some differences in its $^1H$ NMR and IR spectra. However, significant differences were showed between the H-H and H-T copolymers in the $^{13}C$ NMR spectra. Also noteworthy was that$T_g$ value of H-H copolymer was higher than that of the corresponding H-T structure. Decomposition temperature of the H-H copolymer was lower than that of the H-T copolymer. All the H-H and H-T copolymers were soluble in common solvents.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.3
• /
• pp.340-344
• /
• 1998

A facile synthesis of 4,5-(1',2'-diphenylethylenedithio)-1,3-dithiole-2-thione (dPhEDT-DTT) is carried out via a Diels-Alder type [2+4] cycloaddition reaction of 1,3-dithiol-2,4,5-trithione oligomer and t-stilbene. Molecular structure of dPhEDT-DTT is determined by x-ray crystallography: space group P1, a=11.694(3) Å, b=12.117(3) Å, c=14.688(3) Å, α=113.12(2)°, β=102.23(2)°, γ=107.02(2)°, V= 1699.1(7) Å3, Z=2. It turns out that dPhEDT-DTT crystallizes as a racemic compound consisting of (R,R) and (S,S) enantiomers. Coupling reaction of dPhEDT-DTO undergone in neat P(OEt)3 yields TTF(SEt)4 instead of ET derivative. When PR3 (R=OEt, OPh, Ph) is used in benzene, toluene or xylene, however, dPhEDT-DTO is decomposed.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.3
• /
• pp.176-179
• /
• 1988

3-Methoxy-4-cyano-2,9-dioxabicyclo[4.3.0]non-3-e ne (1) was prepared by (4 + 2) cycloaddition reaction of methyl ${\alpha}$-cyanoacrylate with 2,3-dihydrofuran. Compound 1 was ring-open polymerized by cationic catalyst such as boron trifluoride etherate to obtain alternating head-to-head (H-H) copolymer (2) of methyl $\alpha$ -cyanoacrylate and 2,3-dihydrofuran. For comparison, head-to-tail (H-T) copolymer (3) was also prepared by free radical copolymerization of the corresponding monomers. The H-H copolymer exhibited minor differences in its $^1H$-NMR and IR spectra, but in the $^{13}C$-NMR spectra significant differences were observed between the H-H and H-T copolymers. All of the H-H and H-T copolymers were soluble in common solvents and the inherent viscosities were in the range 0.2-0.3 dl/g.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4161-4164
• /
• 2012

Density functional MO calculations for the methylsilole anion of $[C_4H_4SiMe]^-$ and methylgermole anion of $[C_4H_4SiMe]^-$ at the B3LYP (full)/6-311+$G^*$ level (GAUSSIAN 94) were carried out and characterized by frequency analysis. The ground state structure for the methylsilole anion and methylgermole anion is that the methyl group is pyramidalized with highly localized structure. The difference between the calculated $C_{\alpha}-C_{\beta}$ and $C_{\beta}-C_{\beta}$ distances are 9.4 and 11.5 pm, respectively. The E-Me vector forms an angle of $67.9^{\circ}$ and $78.2^{\circ}$ with the $C_4E$ plane, respectively. The optimized structures of the saddle point state for the methylsilole anion and methylgermole anion have been also found as a planar with highly delocalized structure. The optimized $C_{\alpha}-C_{\beta}$ and $C_{\beta}-C_{\beta}$ distances are nearly equal for both cases. The methyl group is located in the plane of $C_4E$ ring and the angle between the E-Me vector and the $C_4E$ plane for the methylsilole anion and methylgermole anion is $2.0^{\circ}$ and $2.3^{\circ}$, respectively. The energy difference between the ground state structure and the transition state structure is only 5.1 kcal $mol^{-1}$ for the methylsilole anion. However, the energy difference of the methylgermole anion is 14.9 kcal $mol^{-1}$, which is much higher than that for the corresponding methylsilole monoanion by 9.8 kcal $mol^{-1}$. Based on MO calculations, we suggest that the head-to-tail dimer compound, 4, result from [2+2] cycloaddition of silicon-carbon double bond character in the highly delocalized transition state of 1. However, the inversion barrier for the methylgermole anion is too high to dimerize.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.4
• /
• pp.487-490
• /
• 1993

A semiempirical methods (PM3-CI-UHF. etc.) for the evaluation of ground and excited state electronic structures of psoralens are applied to angelicin with thymine. The photocycloaddition reaction of angelicin with thymine were deduced to be formed by their preferable HSOMO-LUMO interactions. The photoadduct was inferred to be a C$_{4-}$cycloaddition product with the stereochemistry of cis-anti formed through [2+2] addition reaction between, the 3,4 double bonds of angelicin and the 5,6-double bond of thymine.

• Journal of the Korean Chemical Society
• /
• v.40 no.11
• /
• pp.692-698
• /
• 1996

A synthesis of the oxazole skeleton of discokiolide B, represented by discokiic acid 1, is described. Aldol condensation of 2[2'-(4-phenyl-3-butenyl)]-1,3-oxazole 4-carboxaldehyde(4a) with lithium enolate of methyl propionate provided the discokiic acid methyl ester. The key intermediate 2[2'-(4-phenyl-3-butenyl)]-1,3-oxazole-4-carboxaldehyde (4a) has been synthesized from the rhodium-catalyzed cycloaddition of diazomalonaldehyde with nitrile. The relative stereochemistry of the 3-hydroxy-2-methylpropanoate unit of discokiic acid was assigned on the basis of $^1H$ and $^{13}C$ NMR data.