• Explosives and Blasting
• /
• v.26 no.2
• /
• pp.64-76
• /
• 2008

Bulk Emulsion blasts using mechanized charging system, which is generally used in foreign countries, have recently introduced and gradually increased in Korea. The Bulk Emulsion are safe and able to increase the charging density for improvement of fragmentation and advancement especially in tunneling, and minimizing environmental problem. Because of less toxic gas generation, the explosives are called, namely ech-friendly products. There are two kinds of Bulk Emulsion; one is for open cut and the other is for tunneling. According to features of blast sites and its purpose, the compositions are different, but the principle is the same. In this study, trial blasts using Bulk Emulsion for tunneling had executed at 10 sites in Korea. The major result of the major job-sites is the following. First of all, compared with cartridge explosive, Bulk Emulsion was able to increase its charging density up to $35{\sim}60%$, to decrease the blast holes to approximately $10{\sim}30%$ down, and the advancement was improved up to $8{\sim}20%$ and also 30% up in its fragmentation. Toxic gas production after cartridge blasting showed 34.44ppm of its CO. Bulk Emulsion, however, showed 20.13ppm, which was 58.45% production of the cartridge explosive, and NOx was below 2ppm. The mechanized charging system of Bulk Emulsion should be applied to large sized tunnel blasting, long advanced tunnel which can secure the advancement of over $4{\sim}5m$, and the sites required finishing rapidly.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.3
• /
• pp.97-107
• /
• 2015

Research was initiated to investigate a vegetation characteristics of the species of ground cover plants mixed with herbeceous and woody plants on a cut slope. 4 different ground cover plants (Miscanthus sinensis var. purpurascens, Pennisetum alopecuroides, Festuca arundinacea and Zoysia japonica) were seeded at the same rate of $10.0g/m^2$ with herbaceous plants (Lotus corniculatus var. japonicus, Dianthus sinensis, Aster yomena, Chrysanthemum zawadskii and Coreopsis drummondii L) at the total seeding rate of $7.5g/m^2$ and native woody plants (Lespedeza bicolor Turcz, Indigofera pseudo-tinctoria and Albizzia julibrissin) at the total seeding rate of $7.5g/m^2$, respectively. This experiment was treated with 3 replications on a randomized block design. Data such as surface coverage rate(%), the germinating number, plant height and visual quality were analyzed. There were no statistic differences observed in the soil hardness and the soil moisture content while a significant difference was observed in the surface coverage rate and the germinating number. The surface coverage rate and the germinating number were significantly high in the Pennisetum alopecuroides plot when compared with the Miscanthus sinensis var. purpurascens plot, the Festuca arundinacea plot and the Zoysia japonica plot, respectively from the viewpoint of ground covers. Especially, the surface coverage rate was considerably low in the Festuca arundinacea plot. However, the surface coverage rate and the germinating number were no statistic differences observed in this treatment from the viewpoint of herbaceous and woody plants. Also, both of the plant height and visual quality were high in the Pennisetum alopecuroides plot when compared with the Miscanthus sinensis var. purpurascens plot, the Festuca arundinacea plot and the Zoysia japonica plot, respectively. We concluded that Pennisetum alopecuroides was the optimum plant from the treated ground covers mixed with native woody and herbaceous plants for the balanced emergence from the viewpoint of the ecological slope vegetation.

• Journal of Mushroom
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2019

Agrocybe cylindracea was cultured in a bag, in which sawdust culture medium (1 kg) is put in a plastic bag (PE), with poplar sawdust, rice bran, wheat bran, and dried bean curd refuse in the ratio of 70:10:10:10 (v/v). 2% of the culture medium was inoculated with the liquid starter of Agrocybe cylindracea, and this was incubated at $25^{\circ}C$. After incubation, the A. cylindracea was further cultured by cutting the top vinyl portion of the bag down to the level of the culture medium surface of the first inoculation part. The cut culture medium was placed in a growth room at $25^{\circ}C$, and pin-heading was induced under light irradiation at 99% humidity and 1,000 ppm $CO_$ level for 3days. When the grow the environment was controlled at 95% humidity and $21^{\circ}C$, the bending of the stem was less as compared to that when the cap of the bag had been removed. The number of effective fruiting bodies per bag increased by 140% (28.8), the quantity per bag increased by 29.5%, and 148.5 g A. cylindracea could be potentially harvested.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.4
• /
• pp.177-186
• /
• 2005

The latest concrete structure has showed that the deterioration of durability has been increased by the damage from salt, carbonization, freezing & thawing and the others. Therefore, the measures for the concrete which has deteriorated durability have been taken. Among them, it has been often used that surface treatment which cuts off the deterioration factors of durability by protecting the surface of concrete. However, troubles such as fracture and rupture in the repair layer have been reported as time goes by due to the difference between the organic repair material like epoxy and concrete properties. Researchers have been developing the repair material which can cut off the deterioration factors of durability such as $CO_2$ gas, chloride ion and water by making the formation of concrete elaborate through the reaction with calcium ion when the surface improving agent is coated on the concrete. The main ingredient of that is inorganic substance which is the same as the concrete property. This study was evaluated the surface improving agent for permeability, watertightness, air-permeability, chemical resistance and elution resistance. As a result, it has been reported that the surface improving agent improves watertightness and air-permeability by penetration more than 10mm within concrete. Therefore, it is concluded that the surface improving agent developed in this research prevents deterioration of concrete durability when it is coated on the concrete structure.

• Journal of Radiation Protection and Research
• /
• v.4 no.1
• /
• pp.14-20
• /
• 1979

For accurate and easily shielding irregular shaped organ, its minimized penumbra region and a low melting point alloy 'Lead Y' and synchronizing instrument have been developed. The 'Lead Y' is the quaternary eutectic alloy and it is composed of Lead 30.0% Tin 11.5% Bismuth 48 5% Cadmium 10.0% The density of its at $22^{\circ}C$ is $9.8g/cm^3$ and the melting temperature has $40^{\circ}C\;to\;68^{\circ}C$. The thickness of 'Lead Y' for perfect shielding of Co-60 gamma ray and LINAC 10MeV x-ray is 6cm and 7cm respectively. The 'Lead Y' shielding block is casted directly on the styrofoam from which is cut with hot wire of synchronizer device. The special features and advantages of the Lead Y shielding block could be summarized as follows; 1. The shielding block for radiotherapy is rapidly processed only with boiling water and styrofoam. 2. It is not injure one's health and not danger of a fire, because of not generating of any metals vapor and evil smelling. 3. It is very effective to minimize secondary penumbra for the protection of healthy tissue from unnecessary ionizing radiation regardless of the magnification source to skin distance. 4. The HVL of the Lead Y is 1.2cm for Co-60 gamma ray and it's shielding effect is almost same as the pure lead block. 5. The hardness of Lead Y is 1.5 times higher than lead block. 6. It's reavailability is higher than lead block and then one block of Lead Y is reavailable about 30 to 40 times. 7. It is usefull for shielding of x-ray, gamma ray, beta-ray, electron and neutron radiation. 8. The materials for Lead Y are easy to acquire with reasonable price and tractable.

• Economic and Environmental Geology
• /
• v.50 no.5
• /
• pp.389-400
• /
• 2017

In December 2015, 195 nations agreed to cut green house gas emissions in the Paris Climate Convention, and all over the world showed their willingness to participate in greenhouse gas mitigation. Accordingly, various technologies related to greenhouse gas reduction are being considered, among which carbon dioxide capture, storage, utilization (CCUS) technologies are attracting attention as an unique technology capable of directly removing greenhouse gases. However, CCUS technologies are still costly and have low efficiency. It is still more important to analyze the level of CCUS technology before commercialization and to understand trends and to predict future direction of technology. Therefore, this study analyzes the patent trends of CCUS technology and derives implications for future directions. As a result of country analysis, the United States had the highest number of applications, and sectoral analysis shows that 64% of total patents are from capture sector. Companies such as Alstom technology, Toshiba Corp, and Mitsubishi Heavy are focusing on capturing carbon dioxide. In Korea, government research institutes have focused on storage and utilization technologies. In addition, since the late 2000s, patent applications have increased rapidly, and many countries have been interested in the development of the technology and have made efforts to reduce greenhouse gas.

• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.199-207
• /
• 2008

Wavelength converting devices with a ridge-type waveguide in periodically poled $MgO:LiNbO_3$ are made and characterized. The experimental results are compared with theoretical analysis on the effects of waveguide dimension and duty ratio of the periodically poled structure. To show the relationship of the conversion efficiency to those factors, a new measurement system is configured. That experimental results show that the center wavelength, normalized conversion efficiency and full width half maximum of the conversion efficiency curve are 1067.45 nm, 90.7%/$Wcm^2$ and 0.17 nm, respectively. Also, the estimated results of the duty period and full width half maximum of the conversion efficiency from theoretical calculations agreed well with experimental results with the errors of 0.016 ${\mu}m$ and 0.01 nm.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.489-498
• /
• 2005

Recently, the deterioration of concrete structures have been increased by the damage from salt, carbonization, freezing & thawing and the others. Therefore, the measures for the deterioration of concretes have been taken. Among them, it has been often used that surface treatment which cut off the deterioration factors of durability by protecting the surface of concrete. The water proof and repair materials for concrete mainly use organic materials such as epoxy, these materials excel in intial bonding force and resistance to chemical agents. But they cause difference in the modulus of elasticity and the rate of shrinkage and expansion of concrete, and thus result in such problems as scaling and spatting in the progress of time. Therefore in this study it develop the performance Improving agent of concrete surface that can block a deterioration cause such as $CO_2$ gas, chloride ion and water from the outside and enhance waterproofing ability by reinforcing the concrete surface when applying it to concrete structures.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.4
• /
• pp.100-105
• /
• 2021

Recently, all-solid-state batteries have attracted much attention to improve safety of rechargeable lithium batteries, but the solid-state batteries of conductive ceramics or solid polymer electrolytes show poor electrochemical properties because of several problems such as high interfacial resistance and undesired reactions. To solve the problems of the reported all-solid-state batteries, a hybrid solid electrolyte is suggested, in this study, NASICON-type nanoparticle Li_1.5Al_0.5Ti_1.5P₃O₁₂ (LATP) conductive ceramic, PVdF-HFP, and a carbonate-based liquid electrolyte were composited to prepare a quasi-solid electrolyte. The hybrid solid electrolyte has a high voltage stability of 5.6 V and shows an suppress effect of lithium dendrite growth in the stripping-plating test. The LiNi_0.83Co_0.11Mn_0.06O₂ (NCM811)-based battery with the hybrid solid electrolyte exhibits a high discharge capacity of 241.5 mAh/g at a high charge-cut-off voltage of 4.8V and stable electrochemical reaction. The NCM811-based battery also shows 139.4 mAh/g discharge capacity without short circuit or explosion at 90℃. Therefore, the LATP-based hybrid solid electrolyte can be an effective solution to improve the safety and electrochemical properties of rechargeable lithium batteries.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.2
• /
• pp.292-304
• /
• 2024

This study compared and evaluated the antioxidant activities of Symphoricarpos albus(S. albus) extract and fermented extract. Antioxidant activity was measured by DPPH radical scavenging, FRAP, and ABTS. Concentrations were measured at 200, 100, 50, and 10 ㎍/mL, and antioxidant activity increased in a concentration-dependent manner. S. albus leaves fermented extracts had the highest antioxidant activity. And this study evaluated the safety and tail regeneration of S. albus extract using zebrafish model embryos. Zebrafish are in the spotlight as an alternative animal and can be used for cosmetic research. Zebrafish embryos were collected and evaluated for coagulation rate, hatching rate, and cardiotoxicity. As a result, it was toxic at concentrations above 100 ㎍/ml. The tail was cut and the regenerative effect was observed for 3 days. As a result, from 72 hours, S. albus 200ug/ml leaf extract showed a 17% regenerative effect compared to the control group. These results suggest that S. albus can be used as a natural material for antioxidant and regeneration for skin improvement.