• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.423-432
• /
• 1993

The changes of quality of Fresh Shiitake (Lentinus edodes) was studied in this research work by investigating the effect of low $O_2$ content and high $CO_2$ content, well known as CA Treatment in storage, on the respiration rate and PPO Activity that was the main factor in Shiitake quality decay. CA Condition was conducted in 3 research periods that combined the $O_2$content(1%, 5% and 10%) and $CO_2$ content (5%, 10%, 15% and 20%) and air treatment as the control. The lower $O_2$content was the lower respiration rte that was showed in combination the lower respiration rate that was showed in combination of 20% $CO_2$ and 1% $O_2$ (the lowest), and the control air treatment was the highest . Very low $O_2$ content, conversly, did not show a satisfying result to the product.

• 한국축산식품학회지
• /
• 제44권2호
• /
• pp.408-429
• /
• 2024

The color, lipid oxidation, heme iron (HI) and non-heme iron (NHI) contents, metmyoglobin content and Soret band of myoglobin of ground pork subjected to supercritical CO₂ treatment under different conditions, or to heat treatment (40℃, 2 h) and subsequent storage at 4℃ were evaluated during 9-day period. Supercritical CO₂ treatment significantly increased CIE L^* and CIE b^* values of ground pork during subsequent storage, while the HI content was slightly affected. In general, CIE a^* value and metmyoglobin content were decreased. Supercritical CO₂ treatment for 2 h could increase the thiobarbituric acid-reactive substances (TBARS) value, while treatment for 1 h or less had no effect. The NHI content could be increased only after treatment at above 40℃ or 17.2 MPa for 2 h. The Soret band of myoglobin was shifted to longer wavelength. Increasing treatment temperature from 35℃ to 45℃ could increase CIE L^*, CIE a^*, CIE b^* and TBARS values, HI and NHI contents of the ground pork, while decreasing metmyoglobin content. As the treatment pressure increased from 13.8 MPa to 20.7 MPa, CIE b^* and TBARS values were decreased, while the NHI and metmyoglobin contents were increased. However, the other parameters were unchanged. Extending exposure time from 0.5 h to 2 h could increase CIE L^*, CIE b^* and TBARS values, HI contents, while decreasing CIE a^* value and metmyoglobin content. Correlation analysis showed that the TBARS value was significantly and negatively correlated with the HI content or metmyoglobin content in samples treated at 40℃ or above for 2 h.

• 한국세라믹학회지
• /
• 제51권6호
• /
• pp.612-617
• /
• 2014

The microstructure, nonlinear properties, and impulse clamping characteristics of Pr/Co/Cr/Al co-doped zinc oxide ceramics were investigated with various contents of $Er_2O_3$. Increasing $Er_2O_3$ content increased the density of the sintered pellets from 5.69 to $5.83g/cm^3$, and decreased the average grain size from 10.6 to $6.5{\mu}m$. With increased $Er_2O_3$ content, the breakdown field increased from 2318 to 4205 V/cm, and the nonlinear coefficient increased from 19.4 to 40.2. The clamp characteristics were improved with the increase of the content of $Er_2O_3$. The varistors doped with 2.0 mol% exhibited the best clamp characteristics, in which the clamp voltage ratio was 1.40-1.73 at 1-50 A in an impulse current.

• 한국산학기술학회논문지
• /
• 제7권2호
• /
• pp.120-125
• /
• 2006

산업적으로 경제적인 급속 응고법과 $450^{\circ}C-1hr$ 대기 어닐링을 이용하여 ${\pm}5000Oe$ 이상의 고자계에서 5% 이상의 거대 자기효과를 보이는 두께 $20{\mu}m$의 granular CuCo 합금 리본을 제작하였다. Co의 함량에 따른 최대 자기저항 효과를 확인하기 위해서 Co의 함량을 $5{\sim}30at%$ 범위에서 변화시키며 아래의 자기저항효과와 포화자화의 자기적 특성과 미세구조를 확인하였다. 최대자기저항 효과는 Cu-10at%Co에서 1.2T에서 5.2%의 GMR ratio를 얻었으며, 0.5T에서는 $Cu-8{\sim}14at%Co$에서 공업적으로 활용이 가능한 3% 이상의 MR ratio를 확보할 수 있었다. 5% 이하의 Co 조성범위 리본에서는 초상자성(superparamagnetic)때문에, 20%이상의 Co 조성의 리본에서는 포화자화는 커지지만 Co 클러스터의 과도 성장으로 MR 효과가 급격히 감소하였다. 대기 분위기의 급속 응고와 열처리에 의한 표면 산화막은 자기저항효과에 큰 영향을 주지 못하였다. 따라서 고자계 센서로 사용되는 CuCo 그래뉼라 합금 리본은 $8{\sim}14wt%Co$의 조성 범위에서 공업적 목적에 유리한 거대 자기저항을 갖는 것이 가능하였다.

• Journal of Ecology and Environment
• /
• 제33권2호
• /
• pp.133-139
• /
• 2010

Atmospheric $CO_2$ concentrations have increased exponentially over the last century and, if continued, are expected to have significant effects on plants and soil. In this study, we investigated the effects of elevated $CO_2$ on the growth of Pinus densiflora seedling and microbial activity in soil. Three-year-old pine seedlings were exposed to ambient as well as elevated levels of $CO_2$ (380 and 760 ppmv, respectively). Growth rates and C:N ratios of the pine seedlings were also determined. Dissolved organic carbon content, phenolic compound content, and microbial activity were measured in bulk soil and rhizosphere soil. The results show that elevated $CO_2$ significantly increased the root dry weight of pine seedling. In addition, overall N content decreased, which increased the C:N ratio in pine needles. Elevated $CO_2$ decreased soil moisture, nitrate concentration, and the concentration of soil phenolic compounds. In contrast, soil enzymatic activities were increased in rhizosphere soil, including ${\beta}$-glucosidase, N-acetylglucosaminidase and phosphatase enzyme activities. In conclusion, elevated $CO_2$ concentrations caused distinct changes in soil chemistry and microbiology.

• 한국대기환경학회지
• /
• 제31권4호
• /
• pp.368-377
• /
• 2015

Bunker C fuel oil is a high-viscosity oil obtained from petroleum distillation as a residue. The sulfur content of bunker C fuel oil is limited to 4.0% or even lower to protect the environment. Because bunker C fuel oil is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, carbon dioxide is emitted as a result of combustion. The objective of this study is to investigate $CO_2$ emission characteristics of bunker C fuel oil by sulfur contents. Calorific values and carbon contents of the fuels were measured using the oxygen bomb calorimeter method and the CHN elemental analysis method, respectively. Sulfur and hydrogen contents, which were used to calculate the net calorific value, were also measured and then net calorific values and $CO_2$ emission factors were determined. The results showed that hydrogen content increases and carbon content decreases by reducing sulfur contents for bunker C fuel oil with sulfur contents less than 1.0%. For sulfur contents between 1.0% and 4.0%, carbon content increases as sulfur content decreases but there is no evident variation in hydrogen content. Net calorific value increases by reducing sulfur contents. $CO_2$ emission factor, which is calculated by dividing carbon content by net calorific value, decreases as sulfur content decreases for bunker C fuel oil with sulfur contents less than 1.0% but it showed relatively constant values for sulfur contents between 1.0% and 4.0%.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.255-257
• /
• 2014

The installation of light oil facilities or delayed cokers seems to be inevitable in the oil refinery industry due to the heavy crude oil reserves and the increased use of light fuels as petroleum products. Petroleum coke is a byproduct of oil refineries and it has higher fixed carbon content, higher calorific value, and lower ash content than coal. However, its sulfur content and heavy metal content are higher than coal. In spite of disadvantages, petroleum coke might be one of promising resources due to gasification processes. The gasification of petroleum coke can improve economic value of oil refinery industries by handling cheap, toxic wastes in an environment-friendly way. In this study, $CO_2$ gasification reaction kinetics of petroleum coke, various coals and mixing coal with petroleum coke have investigated and been compared by using TGA. The kinetics of $CO_2$ gasification has been performed with petroleum coke, 3 kinds of bituminous coal [BENGALLA, White Haven, TALDINSKY], and 3 kinds of sub-bituminous coal [KPU, LG, MSJ] at various temperature[$1100-1400^{\circ}C$].

• 콘크리트학회논문집
• /
• 제25권4호
• /
• pp.365-370
• /
• 2013

이 연구에서는 시멘트 생산공정에서 석회석 원료에 따른 $CO_2$ 배출량 및 그에 따른 물리적 특성을 파악하기 위해 국내 6개사의 보통포틀랜드시멘트에 대한 CaO 함유량 및 모르타르의 압축강도를 측정하였다. 탈탄산반응 시 발생되는 CaO와 각각의 시멘트에 함유된 석회석의 손실량에 대하여 CaO 함유량 및 압축강도, $CO_2$ 배출량과의 관계를 비교분석하였다. 단위 시멘트에 대한 $CO_2$ 배출량 산정 결과 석회석의 탈탄산에 따른 $CO_2$ 배출량이 전체 배출량의 67%가량 차지하였고, 시멘트 제조 시 공정관리에 따라 $CO_2$ 배출량에 차이가 있음을 확인하였다. 또한 $CO_2$ 배출의 주요 인자로 화석연료의 사용 및 재료 손실률이 지대한 영향을 미친다는 것을 확인하였다. 시멘트 내의 CaO 함유량이 증가함에 따라 압축강도 역시 증가하였으며, CaO 손실량이 클수록 CaO 함유량 및 압축강도는 감소하였으나 $CO_2$ 배출량은 증가함에 따라 시멘트 제조 시 CaO 생성량보다는 재료 및 공정관리가 $CO_2$ 배출에 더 영향력이 있음을 알 수 있었다. 그리고 포졸란계 혼화재인 PFA, GGBS를 사용함으로서 이에 따른 가격, $CO_2$ 배출 및 강도증진 효과가 있음을 확인하였다.

• Journal of Welding and Joining
• /
• 제14권5호
• /
• pp.106-112
• /
• 1996

The effects of Ti addition in welding wire on the spatter generation and the droplet transfer phenomena were investigated. With increasing Ti content the spattering rate was decreased but the ratio of large size spatter (D $\geq$ 1. 0mm) was increased in both short circuit and globular transfer mode of $CO_2$welding. In short circuit transfer region, the arcing time was increased and the droplet transfer frequency was decreased with increasing Ti content In globular transfer region, the transition current and voltage to globular transfer was lowered and the welding condition region for stable globular transfer was widened with increasing Ti content.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.129-135
• /
• 2004

This study was to evaluate the effect of carbon content on metallic change and fatigue characteristics with Fe-29% Ni-17% Co, low heat expansion alloy, widely using electronic components, precision machines, and sealing with glass and metal etc. The steels were fabricated with variation of carbon content, 0, 0.03, 0.06, 0.1, and 0.20% with VIM and tensile test and fatigue test were performed to achieve the above purpose. The more carbon content, the higher hardness value and yield strength. But elongation of 0.03%C, 0.06%C, and 0.10%C specimen decreased about 2.2%, 1.5% and 0.8% respectively mote than that of the base metal. Especially the strength and elongation of 0.20%C specimen increased simultaneously about 14.4% and 7.5%. Fatigue life of 0.03%C specimen decreased but the more carbon content, the higher fatigue life over 0.06% carbon content more than that of base metal.