• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.2
• /
• pp.91-100
• /
• 2016

The neutron activation inventories in reactor vessel and its internals, and bio-shield of a PWR nuclear power plant were calculated to evaluate the effect of impurity elements contained in the structural materials on the activation inventory. Carbon steel is, in this work, used as the reactor vessel material, stainless steel as the reactor vessel internals, and ordinary concrete as the bio-shield. For stainless steel and carbon steel, one kind of impurity concentration was employed, and for ordinary concrete five kinds were employed in this study using MCNP5 and FISPACT for the calculation of neutron flux and activation inventory, respectively. As the results, specific activities for the cases with impurity elements were calculated to be more than twice than those for the cases without impurity elements in stainless and carbon steel. Especially, the specific activity for the concrete material with impurity elements was calculated to be 30 times higher than that without impurity. Neutron induced reactions and activation inventories in each material were also investigated, and it is noted that major radioactive nuclide in steel material is Co-60 from cobalt impurity element, and, in concrete material, Co-60 and Eu-152 from cobalt and europium impurity elements, respectively. The results of this study can be used for nuclear decommissioning plan during activation inventory assessment and regulation, and it is expected to be used as a reference in the design phase of nuclear power plant, considering the decommissioning of nuclear power plants or nuclear facilities.

• Carbon letters
• /
• v.9 no.2
• /
• pp.115-120
• /
• 2008

Rubber reinforcing carbon black N330 was treated by physical activation under $CO_2$ to different degrees of burn-off. The mechanical properties indicating the reinforcement of SBR (Styrene-Butadiene Rubber) vulcanizates filled by activated carbon blacks, such as tensile strength, modulus at 300% strain and elongation at break were determined. During $CO_2$ activation of fresh carbon blacks, the development of microporous structure caused an increase of extremely large specific surface area and the porosity turned out to be an increasing function of the degree of burn-off. The tensile strength and modulus at 300% of activated carbon blacks filled rubber composites were improved at lower loading ratios of 20 and 30 phr, but decreased drastically after 30 phr, which is considered that it might be difficult to get a fully dispersed rubber mixture at higher loading ratios for fillers having very large specific surface areas. However, the Electromagnetic Interference (EMI) shielding effectiveness of SBR rubber composites having activated carbon black at 74% yield were improved at a large extent when compared to those having raw carbon black and increased significantly as a function of increasing loading ratio.

• Resources Recycling
• /
• v.29 no.3
• /
• pp.3-10
• /
• 2020

The chlorination kinetics of synthetic rutile prepared by selective chlorination of ilmenite with Cl₂ and CO gas mixture were studied in a fluidized bed. Th e effects of reaction temperature, reaction time, and the ratio of Cl₂ and CO partial pressure ($p_{Cl_2}/p_{CO}$) on the conversion rate of TiCl₄ were investigated. The conversion rate of TiC₄ was low under the high $p_{Cl_2}/p_{CO}$ conditions. Moreover, it was considered that the partial pressure of CO gas was more effective than that of Cl₂ gas when comparing the stoichiometric conversion rate and experimental results of high CO partial pressure. Considering the porous structure of particles, the rate controlling step of the chlorination of synthetic rutile was determined to be chemical reaction and the activation energy was calculated as 53.77 kJ/mol.

• PNF and Movement
• /
• v.17 no.3
• /
• pp.441-450
• /
• 2019

Purpose: This study identified the co-activation of quadriceps and hamstring muscles during hamstring strengthening exercises in healthy adults. Methods: Twenty-one participants were required for the present study design to achieve 80% power, 0.8 effect size (η2), and an alpha level of 0.05. Thus, this study recruited 21 healthy adults. All participants performed Nordic exercises, bridge exercises, and one-leg deadlifts randomly. The activity of the rectus femoris, vastus medialis (VM), vastus lateralis (VL), biceps femoris (BF), and semitendinosus (SM) were measured. In addition, the ratios of VM/VL and hamstring/quadriceps (HQ) were measured during the three hamstring strengthening exercises using electromyography. One-way ANOVA was used to compare the co-activation of quadriceps and hamstring muscles in the three exercises. Results: The activity of VM and VL during the performance of one-leg deadlifts was significantly higher than the other two exercises. The BF had significantly higher activity during the Nordic exercises compared to the other two exercises. In addition, the SM activation was significantly greater during Nordic exercises than one-leg deadlifts. Additionally, there was significant difference in HQ ratio among hamstring strengthening exercises. In specific, the one-leg deadlifts yielded a significantly lower HQ ratio. Conclusion: This study revealed that one-leg deadlifts are effective in rehabilitation for anterior cruciate ligament injury. In addition, Nordic exercises can be recommended to facilitate hamstring muscle activation.

• Reproductive and Developmental Biology
• /
• v.30 no.2
• /
• pp.115-118
• /
• 2006

Cyclin B1 is known to reflect the M-phase promoting factor (MPF), a universal regulator of G2/M-phase transition, activity during the process of oocytes maturation. To investigate whether culture condition affects the maturation rate and the expression of cyclin B1 protein, bovine immature oocytes are stimulated and cultured according to the following protocols: Experiment 1: denuded oocytes (denude) only, COC only, denuded oocytes+granulosa cells (denude+GCs) and COC+GCs; Experiment 2: no-activation (control), 7% ethanol for 5 min and $10{\mu}l/ml$ ionomycin for 5 min at immediately before maturation. The maturation rates of denude and no-activation group were significantly lower in both experiments (P<0.05), respectively. Co-culture or stimulation method in bovine immature oocytes culture increases the cyclin B1 expression significantly in both experiments (P<0.05). Based on these results, culture condition affects the maturation rate and the expression of cyclin B1 protein during the first meiotic maturation in bovine immature oocytes.

• Journal of Radiation Protection and Research
• /
• v.42 no.3
• /
• pp.141-145
• /
• 2017

Background: The concrete walls inside the vaults of cyclotron facilities are activated by neutrons emitted by the targets during radioisotope production. Reducing the amount of radioactive waste created in such facilities is very important in case they are decommissioned. Thus, we proposed a strategy of reducing the neutron activation of the concrete walls in cyclotrons during operation. Materials and Methods: A polyethylene plate and B-doped Al sheet (30 wt% of B and 2.5 mm in thickness) were placed in front of the wall in the cyclotron room of a radioisotope production facility for pharmaceutical use. The target was Xe gas, and a Cu block was utilized for proton dumping. The irradiation time, proton energy, and beam current were 8 hours, 30 MeV, and $125{\mu}A$, respectively. To determine a suitable thickness for the polyethylene plate set in front of the B-doped Al sheet, the neutron-reducing effects achieved by inserting such sheets at several depths within polyethylene plate stacks were evaluated. The neutron fluence was monitored using an activation detector and 20-g on de Au foil samples with and without 0.5-mm-thick Cd foil. Each Au foil sample was pasted onto the center of a polyethylene plate and B-doped Al sheet, and the absolute activity of one Au foil sample was measured as a standard using a Ge detector. The resulting relative activities were obtained by calculating the ratio of the photostimulated luminescence of each foil sample to that of the standard Au foil. Results and Discussion: When the combination of a 4-cm-thick polyethylene plate and B-doped Al sheet was employed, the thermal neutron rate was reduced by 78%. Conclusion: The combination of a 4-cm-thick polyethylene plate and B-doped Al sheet effectively reduced the neutron activation of the investigated concrete wall.

• Korean Journal of Materials Research
• /
• v.13 no.3
• /
• pp.160-168
• /
• 2003

The co-firing processes for the supported type planar solid oxide fuel cell were investigated. A flat cell of $7.7${\times}$10.8\textrm{cm}^2$ was fabricated successfully by the co-firing process, in which green films were co-sintered in the forms of two layers of anode/electrolyte or of three layers of anode/electrolyte/cathode with gas distributor. A co-fired cell of two layers yielded a power of 200 ㎽/$\textrm{cm}^2$ at 608 ㎷. Its performance loss was mainly due to iR drop in the anodic gas distributor, which was attributed to poor contact between anodic gas distributor and current collector. The performance in the co-fired cell of three layers was much lower than that of two layers, which resulted from the large iR drop and activation overvoltage at the cathodic side. In the co-fired cell of two layers, the impedance analysis indicated that the performance decay during cell operation is due to both anode overvoltage and iR drop at anode side. Also the electrode reaction of the co-fired two layers' cell is considered to be controlled by activation overvoltage within the low current of 50 ㎃.

• Korean Journal of Metals and Materials
• /
• v.47 no.2
• /
• pp.129-137
• /
• 2009

Corrosion behaviors of TiN coated dental casting alloys have been researched by using various electrochemical methods. Three casting alloys (Alloy 1: 63Co-27Cr-5.5Mo, Alloy 2: 63Ni-16Cr-5Mo, Alloy 3: 63Co-30Cr-5Mo) were prepared for fabricating partial denture frameworks with various casting methods; centrifugal casting(CF), high frequency induction casting(HFI) and vacuum pressure casting(VP). The specimens were coated with TiN film by RF-magnetron sputtering method. The corrosion behaviors were investigated using potentiostat (EG&G Co, 263A. USA) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The corrosion morphologies were analyzed using FE-SEM and EDX. Alloy 1 and Alloy 2 showed the ${\alpha}-Co$ and ${\varepsilon}-Co$ phase on the matrix, and it was disappeared in case of TiN coated Alloy 1 and 2. In the Alloy 3, $Ni_2Cr$ second phases were appeared at matrix. Corrosion potentials of TiN coated alloy were higher than that of non-coated alloy, but current density at passive region of TiN coated alloy was lower than that of non-coated alloy. Pitting corrosion resistances were increased in the order of centrifugal casting, high frequency induction casting and vacuum pressure casting method from cyclic potentiodynamic polarization test.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.3
• /
• pp.155-160
• /
• 2005

Kinetic studies were carried out for aquation of carbonatobis(ethylenediamine)cobalt(III) complexes in [H+] aqueous solution by UV/VIS-spectrophotometry. The rate law that in deduced from rate data is $rate=k_H{^+}[H^+]^{1.4}$ {$[Co(en)_2(CO_3)]^+$}1.0 where $k_H{^+}$ is the rate constant considering acidic catalyst, $H^+$ ion whose value is $0.241l{\cdot}mol^{-1}{\cdot}sec^{-1}$. The values of activation parameters Ea, ${\Delta}H^{\ast}$ and ${\Delta}S^{\ast}$ were $15.33Kcal{\cdot}mol^{-1}$, $14.52Kcal{\cdot}mol^{-1}$ and -57.49 e.u. respectively. On the basis of kinetic data and the observed activation parameters, we have proposed the mechanism that proceeds with two step protonations. The rate equation derived from the proposed mechanism has been in agreement with the observed rate equation. It has been seen that our modified mechanism for Harris's proton freequilibrium one prefer to the his concerted mechanism, and more the last product substitute $H_2O$ for $OH^-$ the Harris's mechanism in the acidity range 2 < pH < 5.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.2
• /
• pp.176-183
• /
• 2016

Activated carbon fibers (ACFs) for $CO_2$ adsorption were prepared from polyacrylonitrile (PAN) fiber through the systematic processes such as oxidation, activation and amination with the focus on the formation of nitration functional groups. Textural analysis of test samples revealed the decrease of specific surface area and pore volume by chemical activation including amination. The ratio of micropores to the total volume was 0.85 to 0.91, which was high enough with the pore size of 1.57 to 1.77 nm. Nitrogen compounds such as imine, pyridine and pyrrole presenting favorable interforces to $CO_2$ molecules were formed throughout the whole preparation steps. The aminated ACF adsorbent showed the enhanced adsorption capacity, 0.40 mmol/g for low-level $CO_2$ flow (3000 ppm) at room temperature. Selectivity of $CO_2$ against dry air ($O_2$ & $N_2$) also increased from 1.00 to 4.66 by amination.