• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2010년도 추계학술발표대회
• /
• pp.557-560
• /
• 2010

고성능의 보급형 디지털 영상장비와 레이저프린터의 보급으로 인해 인쇄물의 불법적인 위변조가 사회적 문제로 대두되고 있고, 관련 범죄 또한 증가하는 추세이다. 이에 따라 디지털 포렌식 기술에 기반한 촬영 및 인쇄기기 식별 기술들이 연구되고 있다. 본 논문에서는 인쇄기기별 특성에서 기인하는 인쇄물의 노이즈 특성을 이용해 인쇄기기를 판별하는 알고리즘을 제안한다. 이산 웨이블릿 변환과 위너 필터를 이용한 노이즈 특성 추출 방법을 설명하고, 추출된 노이즈 특성에서 명암도 동시발생 행렬을 계산하고 왜도, 첨도, 공분산, 상관계수의 특징을 추출하였다. 추출한 특징을 서포트 벡터 머신에 적용하여 디지털 인쇄기기의 제조사와 모델을 판별하였다. 제안한 알고리즘의 성능을 분석하기 위하여 7대 프린터에서 각 371장씩 출력된 총 2,597장 이미지로 실험하였고, 제안한 알고리즘이 기존 방법에 비하여 높은 정확률을 나타냄을 보였다.

• The Journal of Advanced Prosthodontics
• /
• 제16권2호
• /
• pp.91-104
• /
• 2024

PURPOSE. The objectives of the current study were to estimate the influence of self-reinforced hollow structures with a graded density on the dimensional accuracy, weight, and mechanical properties of Co-Cr objects printed with the direct metal laser sintering (DMLS) technique. MATERIALS AND METHODS. Sixty-five dog-bone samples were manufactured to evaluate the dimensional accuracy of printing, weight, and tensile properties of DMLS printed Co-Cr. They were divided into Group 1 (control) (n = 5), Group 2, 3, and 4 with incorporated hollow structures based on (spherical, elliptical, and diamond) shapes; they were subdivided into subgroups (n = 5) according to the volumetric reduction (10%, 15%, 20% and 25%). Radiographic imaging and microscopic analysis of the fractographs were conducted to validate the created geometries; the dimensional accuracy, weight, yield tensile strength, and modulus of elasticity were calculated. The data were estimated by one-way ANOVA and Duncan's tests at P < .05. RESULTS. The accuracy test showed an insignificant difference in the x, y, z directions in all printed groups. The weight was significantly reduced proportionally to the reduced volume fraction. The yield strength and elastic modulus of the control group and Group 2 at 10% volume reduction were comparable and significantly higher than the other subgroups. CONCLUSION. The printing accuracy was not affected by the presence or type of the hollow geometry. The weight of Group 2 at 10% reduction was significantly lower than that of the control group. The yield strength and elastic modulus of the Group 2 at a 10% reduction showed means equivalent to the compact objects and were significantly higher than other subgroups.

• 대한화장품학회지
• /
• 제38권1호
• /
• pp.43-50
• /
• 2012

인체피부에서 화장품이나 화장품 원료의 안전성시험은 대체로 육안평가로 이루어져왔다. 하지만, 피부반응 초기의 미세한 변화에 대해서 육안으로는 감지하지 못하는 경우가 많다. 따라서, 본 연구에서는 수종의 화장품 원료에 의해 유발되는 홍반반응에 대해 육안평가뿐 아니라, 레이저도플러혈류이미지(LDPI) 측정장비를 이용한 혈류변화 측정, $Vapometer^{(R)}$를 이용한 경피수분손실량(TEWL) 측정, 분광광도계를 이용한 피부색 측정과 같은 기기평가를 병행하여 비교하였다. 30명의 건강한 여성 피험자를 대상으로 오일류 7종, 계면활성제류 6종, 보습제류 5종을 피험자의 등 부위에24 h 폐쇄첩포(D0)하여 피부반응을 유도하였고 첩포 제거 후 30 min (D1), 24 h (D2)에 육안평가와 기기평가를 각각 실시하였다. 육안평가 결과, 프로필렌글라이콜을 제외한 모든 오일류와 보습제류는 저자극 수준의 피부반응(반응도 0+ - 2.9+)을 보인 반면, 프로필렌글라이콜과 모든 계면활성제류는 중자극에서 강자극 수준의 피부반응(반응도 3+ - 5+)을 보였다. 기기측정 결과, 육안평가에서 저자극 범주의 피부반응에 대해서 혈류량이나 피부색보다 경피수분손실량이 가장 민감하게 피부변화를 감지하였다.

• Restorative Dentistry and Endodontics
• /
• 제31권4호
• /
• pp.257-262
• /
• 2006

에피네프린을 함유한 국소마취제가 치수혈류량에 미치는 영향을 관찰하고, 이 국소마취가 와동 형성에 의해 야기되는 치수의 혈류변화에 미치는 영향을 평가하고자 전신마취 된 아홉 마리의 고양이 견치에서 1 : 100.000 에피네프린이 함유된 2% 리도카인 용액으로의 국소 침윤마취 전후 및 와동형성 전후의 치수혈류를 laser Doppler flowmetry (Periflux 4001, Perimed Co.. Sweden)를 사용하여 측정하고 paired t-test 로 통계 분석하였다 . 상아질 와동의 형성은 치수혈류의 현저한 증가를 초래하였다 (p < 0.05). 에피네프린을 함유한 리도카인의 침윤마취는 치수혈류를 유의하게 감소시켰다 (p < 0.05). 국소마취 한 치아에서는 마취되지 않은 치아에 비해 와동형성 시 유의하게 적은 치수혈류의 증가를 나타내었다 (p < 0.05). 따라서 본 연구에서는 혈관수축제를 포함한 국소마취가 와동 형성에 의해 초래되는 혈류량의 증가를 효과적으로 억제할 수 있음을 보여주고 있다.

• 분석과학
• /
• 제20권3호
• /
• pp.219-226
• /
• 2007

유리 같은 미세 증거물은 전이(transfer)의 결과로서 법과학 실험실에 자주 제시되는 증거물의 일종이다. 이들 시료에서 미량 원소 분석의 반복성과 재현성을 검토하였다. 미세 증거물의 유출원을 규명하기 위하여 LA-ICP-MS를 사용하여 분산 분석이 이루어졌다. 짝지음비교가 모든 시료에 대하여 이루어졌고 각 시료는 이동식별을 위하여 총 [n(n-1)/2] (n :시료의 수) 쌍이 비교 되었다. 이번 실험의 목적은 법과학 시료의 다원소분석에 대한 LA-ICP-MS의 이용 가능성을 검토하는 것이다. 유리의 경우, 2개의 제조 공장으로 부터의 12개 시료를 수집하여 분석에 사용하였다. 유리에서 미량원소 분석용 표준품 NIST 612를 사용하여 31개 원소를 분석하고 분산분석(ANOVA)이 수행되었다. 원소들은 정밀도와 시료간 분산값을 고려 하여 4개의 그룹으로 나뉘어 졌다. 11개의 원소(209Bi, 90Zr, 121Sb, 178Hf, 59Co, 238U, 208Pb, 140Ce, 118Sn, 49Ti, 137Ba)가 선택 되었고 137Ba 만으로 66개의 가능한 pair들 중 6개를 구별(p<0.05)하지 못하였으나, 49Ti과 137Ba의 두 원소를 사용할 경우 모든 시료들이 구별 가능 한 것으로 나타났다(p<0.05). 결론적으로 LA-ICP-MS에 의한 다원소 분석은 법과학 시료의 이동 식별에 잠재력있는 분석기법이라 하겠다.

• 정보통신설비학회논문지
• /
• 제3권2호
• /
• pp.51-60
• /
• 2004

A광섬유 용융인장방법에 의해서 100GHz 채널간격을 갖는 DWDM용 8채널 광다중화기를 제작하였다. 8채널 광다중화기는 전광섬유형 Mach Zehnder 간섭계(MZI)를 3단으로 다단 연결하여 제작되었으며, 광다중화기 채널별 출력파장의 삽입손실을 균일하게 하기 위하여 파장에 대한 삽입손실변화가 적은 파장무의존형 커플러(WFC)를 이용하여 전광섬유형 MZI를 제작하였다. 광다중화기를 구성하는 광섬유형 MZI를 제작함에 있어서 경로차에 따른 출력 파장간격의 변화를 시뮬레이션을 통하여 알아보았고 다단연결에 의한 광다중화기 구현방법을 논의하였다. 전용 제작 장치를 이용하여, 전광섬유형 MZI를 제작하였으며, 미세한 파장을 저절하기 위해서, $CO_2$ 레이저를 이용하였다. 제작된 8채널 광다중화기는 평균 삽입 손실 2.1dB, 5.5dB에서의 통과대역폭이 0.8nm 이며, 25dB의 채널 Crosstalk를 갖는 특성을 얻을 수 있었고, 편광의존손실은 0.06dB 였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.134.2-134.2
• /
• 2014

Photonic crystal solar cells have the potential for addressing the disparate length scales in polymer photovoltaic materials, thereby confronting the major challenge in solar cell technology: efficiency. One must achieve simultaneously an efficient absorption of photons with effective carrier extraction. Unfortunately the two processes have opposing requirements. Efficient absorption of light calls for thicker PV active layers whereas carrier transport always benefits from thinner ones, and this dichotomy is at the heart of an efficiency/cost conundrum that has kept solar energy expensive relative to fossil fuels. This dichotomy persists over the entire solar spectrum but increasingly so near a semiconductor's band edge where absorption is weak. We report a 2-D, photonic crystal morphology that enhances the efficiency of organic photovoltaic cells relative to conventional planar cells. The morphology is developed by patterning an organic photoactive bulk heterojunction blend of Poly(3-(2-methyl-2-hexylcarboxylate) thiophene-co-thiophene) and PCBM via PRINT, a nano-embossing method that lends itself to large area fabrication of nanostructures. The photonic crystal cell morphology increases photocurrents generally, and particularly through the excitation of resonant modes near the band edge of the organic PV material. The device performance of the photonic crystal cell showed a nearly doubled increase in efficiency relative to conventional planar cell designs. Photonic crystals can also enhance performance of other optoelectronic devices including organic laser.

• 한국재료학회지
• /
• 제22권6호
• /
• pp.275-279
• /
• 2012

(3-mercaptopropyl)trimethoxysilane (MPTMS) was used as a silylation agent, and modified silica nanoparticles were prepared by solution polymerization. 2.0 g of silica nanoparticles, 150 ml of toluene, and 20 ml of MPTMS were put into a 300 ml flask, and these mixtures were dispersed with ultrasonic vibration for 60 min. 0.2 g of hydroquinone as an inhibitor and 1 to 2 drops of 2,6-dimethylpyridine as a catalyst were added into the mixture. The mixture was then stirred with a magnetic stirrer for 8 hrs. at room temperature. After the reaction, the mixture was centrifuged for 1 hr. at 6000rpm. After precipitation, 150 ml of ethanol was added, and ultrasonic vibration was applied for 30 min. After the ultrasonic vibration, centrifugation was carried out again for 1 hr. at 6000rpm. Organo-modification of silica nanoparticles with a ${\gamma}$-methacryloxypropyl functional group was successfully achieved by solution polymerization in the ethanol solution. The characteristics of the ${\gamma}$-mercaptopropyl modified silica nanoparticles (MPSN) were examined using X-ray photoelectron spectroscopy (XPS, THERMO VG SCIENTIFIC, MultiLab 2000), a laser scattering system (LSS, TOPCON Co., GLS-1000), Fourier transform infrared spectroscopy (FTIR, JASCO INTERNATIONL CO., FT/IR-4200), scanning electron microscopy (SEM, HITACHI, S-2400), an elemental analysis (EA, Elementar, Vario macro/micro) and a thermogravimetric analysis (TGA, Perkin Elmer, TGA 7, Pyris 1). From the analysis results, the content of the methacryloxypropyl group was 0.98 mmol/g and the conversion rate of acrylamide monomer was 93%. SEM analysis results showed that the organo-modification of ultra-fine particles effectively prevented their agglomeration and improved their dispensability.

• 한국해양바이오학회지
• /
• 제14권1호
• /
• pp.9-24
• /
• 2022

Low-molecular weight peptides derived from fish collagen exhibit several bioactivities, including antioxidant, antiwrinkle, antimicrobial, antidiabetic, and antihypertension effects. These peptides are also involved in triglyceride suppression and memory improvement. This study aimed to investigate the optimal processing condition for preparing low-molecular weight peptides from flounder skin, and the properties of the hydrolysate. The optimal processing conditions for peptic hydrolysis were as follows: a ratio of pepsin to dried skin powder of 2% (w/w), pH of 2.0, and a temperature of 50℃. Peptic hydrolysate contains several low-molecular weight peptides below 300 Da. Gly-Pro-Hyp(GPHyp) peptide, a process control index, was detected only in peptic hydrolysate on matrix-assisted laser desorption/ionization-time-of-flight(MALDI-TOF) spectrum. 2,2'-azinobis-(3-3-ethylbenzothiazolline-6- sulfonic acid(ABTS) radical scavenging activity of the peptic hydrolysate was comparable to that of 1 mM ascorbic acid, which was used as a positive control at pH 5.5, whereas collagenase inhibition was five times higher with the peptic hydrolysate than with 1 mM ascorbic acid at pH 7.5. However, the tyrosinase inhibition ability of the peptic hydrolysate was lower than that of arbutin, which was used as a positive control. The antibacterial effect of the peptic hydrolysate against Propionibacterium acne was not observed. These results suggest that the peptic hydrolysate derived from a flounder skin is a promising antiwrinkle agent that can be used in various food and cosmetic products to prevent wrinkles caused by ultraviolet radiations.

• 대한통합의학회지
• /
• 제7권2호
• /
• pp.1-10
• /
• 2019

Purpose : To investigate the relationship between breathing pattern disorder and joint position error (JPE) in patients with chronic low back pain (CLBP). Methods : Thirty nine patients with CLBP participated. End-tidal $CO_2$ and respiration rate (RR) were measured using a capnography. Breathing-hold time (BHT) and Nijmegen Questionnaire (NQ) were investigated. Thoracic excursion was measured with a cloth tape measurement technique. Joint position error were measured using a small laser point mounted on a lightweight headband. they were asked to relocate the head, after the neck movement on the horizontal plane. Pearson 's test was used for correlation analysis between respiratory variables and JPE in patients with CLBP. Independent t-test was used to verify the difference between thoracic and diaphragm breathing pattern in patients with CLBP. The significance level was set at 0.05. Results : There was a significant correlation between JPE (LR) and JPE (RR, EX) (r=.639, r=.813) (p<.001) and a low negative correlation with end-tidal $CO_2$ (r=-.357) (p<.05). There was a significant correlation between RR and JPE (EX) (r=.750) (p<.001). There was a low correlation between JPE (EX) and NQ (r=.333) (p<.05). There was a somewhat high negative correlation between NQ and thoracic excursion (r=-.528) (p<.001). There was a somewhat high negative correlation between thoracic excursion and JPE (LR, RR, EX) (r=-.470, r=-.484, r=-.602) (p<.001). There were no significant differences in the RR, BHT, NQ, and thoracic excursion between the thoracic and diaphragmatic breathing (p>.05). There was a significant difference in the JPE (EX), end - tidal $CO_2$, and VAS values between the thoracic and diaphragm breathing (p<.05). Conclusion : There was a correlation between JPE (EX) and NQ in patients with CLBP, and correlation between thoracic excursion and JPE (LR, RR, EX) and NQ. There was a significant difference in the JPE (EX), end-tidal $CO_2$ level, and VAS value in the comparison of thoracic breathing and diaphragm breathing. The results showed that breathing patterns and JPE were related to each other.