• Laser Solutions
• /
• v.16 no.3
• /
• pp.1-10
• /
• 2013

In this study, Al-Si coated boron steel(1.2 mm) were laser welded by $CO_2$ laser and hot-stamping was applied to the laser joints. Tensile properties and microstructures of the joints were investigated before and after hot-stamping. Tensile and yield strengths of the as welded specimen similar with base metal and fracture occurred base metal of boron steel. Although, in case of heat treated specimen, fracture occurred fusion zone that Al segregated zone near the bond line. These could be explained by the existence of ferrite, in the Al segregated zone near the bond line and base metal of boron steel. Before hot-stamping, hardness of base metal is lower than fusion zone and heat affected zone in spite of exist Al segregation zone($Fe_3$(Al,Si)). So fracture occurred base metal. Although, after hot-stamping, microstructure of base metal and welds zone transformed to martensite and bainite except in Al segregation zone near the bond line that $Fe_3$(Al,Si) transformed to a-ferrite. So fracture occurred Al segregation zone near the bond line.

• Archives of Plastic Surgery
• /
• v.37 no.2
• /
• pp.153-160
• /
• 2010

Purpose: The prevalence of skin cancers and cutaneous premalignant lesions are increasing recently. It is necessary to treat cutaneous premalignant lesions, because these can progress to invasive skin cancers. We conducted a retrospective study to evaluate the usefulness of $CO_2$ laser resurfacing in skin tumor surgery. Methods: From 2005 to 2008, 14 patients with skin cancers, photodamaged skin and cutaneous premalignant lesions were treated with skin cancer excision, immediate reconstruction, and $CO_2$ facial laser resurfacing. Mean average follow-up period was 15.6 months (5 months - 36 months). Biopsy and clinical photograph were taken preoperatively, intraoperatively and through follow-up period to assess the effectiveness of laser resurfacing. Recurrence and side effects were evaluated through follow-up period. Results: Histologic examination shows the abolition of actinic atypia, regeneration of epidermis and normalization of cellular differentiation after laser resurfacing. Clinical photographs shows elimination of keratoses and spots, and the homogeneous, smoothening change of skin surface, indicating healthy and younger faces. All patients had remained free of skin cancers and premalignant lesions in laser-treated field through follow-up period. Conclusion: $CO_2$ laser resurfacing in skin tumor surgery can treat not only premalignant lesions but also subclinical lesions of photodamaged skin. Moreover it may be helpful in prophylaxis against skin cancers and premalignant lesions, providing rejuvenation and cosmetic improvement.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.4
• /
• pp.761-771
• /
• 1998

In this study, attempt has been made to evaluate the effect of $CO_2$ laser irradiation on enamel surface structure and the bond strength of sealant material. Conventional acid etching was used as a control technic for comparison. The results obtained from this experiment were as follows; 1. The highest mean shear bond strength value was observed in samples of Group I (acid-etching) with the statistical significance(p<.05) between all the other groups. 2. The shear bond strength in Group IV was the lowest among laser etching groups. but there were no significant difference between them(p>.05). 3. Scanning electron microscopic observation showed that the rough and irregular surface was created by $CO_2$ laser treatment with the formation of numerous pores, micro-cracks, and small bubble-like inclusion. Increasing the energy density induced localized surface melt with a thin smooth glaze-like appearance. 4. In acid-etched control specimen cohesive failure predominated, whereas adhesive failure was the main mode in laser-treated group. Based upon the above-mentioned results, it can be assumed that the $CO_2$ laser is not an adequate substitute for the acid-etch technique in enamel preconditioning. More studies are required to explore the effective condition of laser irradiation which could attain the better bond strength of restorative materials.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2002.05a
• /
• pp.28-33
• /
• 2002

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2001.05a
• /
• pp.55-58
• /
• 2001

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 1998.11a
• /
• pp.33-35
• /
• 1998

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 1998.11a
• /
• pp.51-55
• /
• 1998

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2004.10a
• /
• pp.82-85
• /
• 2004

• Laser Solutions
• /
• v.1 no.1
• /
• pp.30-38
• /
• 1998

This study includes the efface of shielding gas types on $CO_2$ laser weldability of low carbon automotive galvanized steel. The types of shielding gas evaluated are He, $CO_2$, Ar, $N_2$, 50%Ar＋50%$N_2$. The weld penetration, strength, formability(Erichsen test) of Laser weld are found to be strongly dependent upon the types of shielding gas used. Further, the maximum travel speed and flow rate to form a keyhole weld is also dependent upon types of shielding gas. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related with ionization/dissociation potential, which determine the period of plasma formation and disappearance. Further, thermal conductivity and reactivity of gas with molten pool also give strong effect on penetration and porosity formation which in turn affect on the formability and strength.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.1
• /
• pp.32-43
• /
• 1995

Ti-6Al-4V alloy are widely used in chemical and aircraft industries for their good corrosion resistance and high strength to weight ratio. Surface alloying of Ti alloy by $CO_2$ laser is able to produce few hundred micrometers thick TiN surface-alloyed layer with high hardness on the substrate very simplely by injecting reaction gas($N_2$) into a laser-generated melt pool and adjust the hardness to the specific requirements of the individual application by changing of laser processing parameters. This research has been investigated the effect of such parameters on TiN surface-alloying of Ti-6Al-4V alloy by $CO_2$ laser. The maximum hardness of TiN surface-alloyed zone waw obtained by injecting 100% $N_2$ gas and it was decreased as the amount of $N_2$ gas in Ar and $N_2$ gas mixture was decreased. As scanning speed was increased, the hardness and depth of TiN surface-alloyed zone was decreased at constant laser power. The surface hardness after double scanning laser treatment is higher than that of single scanning. At constant laser power, the surface roughness is increased after the surface alloying if laser scanning speed is decreased.