• Journal of Radiation Protection and Research
• /
• v.23 no.4
• /
• pp.237-242
• /
• 1998

The goal of this work was to optimize the liquid scintillation counting techniques for the determination of C-14 in environmental samples such as biological and air samples. Carbon-14 activities in most environmental samples were measured with direct $CO_2$ absorption method. The highest figure of merit was found through the variation of Carbosorb $E^{TM}$ and Permatluor $V^{TM}$ ratio, in the measurement windows. The best condition was 1:1 volume ratio. Average 2.35 g of $CO_2$ was reproducibly absorbed in the 20 ml mixture within 40 min. The counting efficiency determined by repeated analysis of NIST oxalic acid standard and the background count rate were measured to be $58.8{\pm}1.4%$ and $1.88{\pm}0.06\;cpm$, respectively in case of saturated solution. The correction curves of counting efficiency for partially saturated solutions and for saturated solutions with quenching were prepared, respectively. The overall uncertainty of the sample specific activity for near background levels was estimated to be about 7 % for 4 hours counting at 95 % confidence level. The long-term stability of samples has been checked for all the counting techniques over a two week periods, and no apparent change in counting efficiency and background level was found at that time.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.2
• /
• pp.15-22
• /
• 2001

Radiocarbon ($^{14}C$) and tritium in water have been applied to hydrogeology as a tool for dating of groundwater. The long half-life of $^{14}C$(5,730 years) makes it useful for evaluation of residence time of groundwater, However, the $^{14}C$ has not been applied to groundwater studies in Korea, owing to the absence of preparation line for $^{14}C$ analysis. By this time $^{14}C$ of groundwater has been analyzed mainly using benzene synthesizer, which is so complicate and time-consuming that has been is limitedly applied to hydrogeology. Recently, the direct $CO_2$ absorption method for $^{14}C$ analysis was developed and introduced to KAERI for the evaluation of domestic groundwater system. The results of $^{14}C$ in groundwater would be usefully applied to hydrogeological studies such as the well understanding of groundwater flow system in depth. The reliability of our $^{14}C$ data was confirmed by inter-comparison with the qualified international isotope laboratory.

• Journal of the Korean Vacuum Society
• /
• v.3 no.2
• /
• pp.227-233
• /
• 1994

CuAlGeSe4 및 CuAlGeSe4 ; Co2+ 결정을 고순도의 성분원소로부터 합성하고 서냉법으로 결정을 성장시켰다. 이들결정은 chalcopyrite 결정구조를 갖고 있으며 직접전이형 energy gap 구조를 갖고 286K에서 energy gap은 CuAlGeSe4 결정의 경우는 2.394eV이며 CuAlGeSe4 ; Co2+ 결정의 경우는 2.302 eV로 주어졌다. CuAlGeSe4 : Co2+ 결정에서 cobalt에 의한 불순물 광흡수 peak들은 12243, 7002, 3890 cm-1에서 나타났으며 이 peak들은 CuAlGeSe4 : Co2+ 결정의 Td symmetry site에 위치한 Co2+ ion의 energy 준위사이의 전자전이에 의한 optical absorption임을 규명했다.

• Journal of the Korean Chemical Society
• /
• v.51 no.4
• /
• pp.331-338
• /
• 2007

A rapid, simple and sensitive spectrophotometric method was developed for the determination of cobalt(II) using 2-hydroxy-3-methoxy benzaldehyde thiosemicarbazone (HMBATSC) as a analytical reagent. The metal ion in aqueous medium forms a brown coloured complex with HMBATSC at pH 6.0. The complex has two absorption maxima at 375 nm and 390 nm. At 375 nm, the reagent shows considerable absorbance, while at 390 nm the reagent does not shows appreciable absorbance. Hence, analytical studies were carried out at 390 nm. Beer's law is obeyed in the range of 0.059-2.357 μg ml-1 of Co(II). The molar absorptivity and Sandall's sensitivity of the method are 2.74×104 l mol-1 cm-1 and 0.0024 μg cm-2 respectively. The interference of various diverse ions has been studied. The complex has 1:2 [Co(II)- HMBATSC] stoichiometry. A method for the determination of cobalt(II) by second order derivative spectrophotometry has also been proposed. The proposed methods were applied for the determination of cobalt(II) in alloy steels, vitamin B12 and in some biological samples.

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.17-25
• /
• 2009

The precise calculation of gas absorption coefficient in the radiative transfer equation is very important to the prediction of radiative heat transfer induced from liquid engine plume in view of base insulation design. For this purpose, the WNB model for gas absorption coefficient is described with the selection of important parameters and then the calculated results are compared with those of SNB model for validation. Total emissivity, narrow band averaged intensity and total intensity are calculated and compared to the results of SNB model. As results, the total emissivity and the total intensity are well matched within 3.1% and roughly 5 % error, respectively. Moreover, the gas modeling database is constructed with estimation of the combustion gas composition of $CO_2$ and $H_2O$ for liquid engine plume.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.24-24
• /
• 2010

Chalcopyrite $Cu(In,Ga)Se_2$ (CIGS) 화합물 반도체는 고효율 박막태양전지의 광 흡수층으로 사용되는 물질 중 가장 우수한 효율 (19.9%, NREL 2008)을 보유하고 있다. CIGS는 직접천이형 에너지밴드갭 (direct bandgap)을 가지고 있고, 광흡수계수가 $1{\times}10^5\;cm^{-1}$로서 반도체 중 서 가장 흡수율이 높은 재료에 속하여 두께 $1{\sim}2\;{\mu}m$의 박막으로도 고효율의 태양전지 제조가 가능하고, 또한 장기적으로 전기광학적 안정성이 매우 우수한 특성을 지니고 있다. 현재 고효율 CIGS 셀생성을 위해 널리 사용되고 있는 CIGS 흡수층 성장공정은 "co-evaporation(동시증발법)"과 2-step 공정이라 불리는 "sputter-selenization(스퍼터-셀렌화)" 방법이다. 동시증발법은 개별원소 Cu, In, Ga, Se 들을 고진공 분위기에서 고온 ($550{\sim}600^{\circ}C$)기판위에 증착하는 방법으로 소면적에서 가장 좋은 효율(~20%)을 보이는 공정이다. 하지만, 고온, 고진공 공정조건과 대면적 증착시 온도 및 조성 불균일 등의 문제점 등으로 상용화에 어려움이 있다. 스퍼터-셀렌화 공정은 1단계에서 스퍼터링 방식으로 CuGaIn 전구체를 증착하고, 2단계에서 고온($550{\sim}600^{\circ}C$)하에 $H_2Se$ 혹은 Se vapor와 반응시켜 CIGS를 생성한다. 일본의 Showa Shell와 Honda Soltec 등에 의해 이미 상업화 되었듯이, 저비용 대면적으로 상업화 가능성이 높은 공정으로 평가되고 있다. 하지만, 2단계에서 사용되는 $H_2Se$ 및 Se vapor의 유독성, 기상 Se과 금속전구체 간의 느린 셀렌화 반응속도, 셀렌화반응 후 생성된 CIGS 박막 두께방향으로의 Ga 불균일분포, 생성된 CIGS/Mo 계면 접착력 저하등의 문제점들이 해결되어야만 상업화에 성공할 수 있을 것이다. 본 Tutorial에서는 CIGS 물질의 열역학 상평형과 반응메카니즘에 대해 설명하고, 다양한 생성 공정들을 소개할 것이다.

• Journal of Energy Engineering
• /
• v.7 no.2
• /
• pp.223-230
• /
• 1998

Energy consumption statistics have been surveyed for 50 large commercial buildings with high energy consumption records in Seoul City. The buildings were classified into three different groups for data analysis: hospitals, hotels, and department stores/office buildings. The analysis was focused on identifying installed boiler and refrigerator data, energy consumption rates, and energy load distribution throughout the year. Refrigerating electricity was confirmed again to affect most on the formation of the summer electricity load peak as expected. Replacing the refrigerator electricity peak in the summer with co-generation in large commercial buildings. However, overall heat load distribution in a single building is still considered not large enough for economically feasible co-generation and thus joint co-generation for multiple neighboring buildings are preferred and the Electric Power Law and LNG pricing policy should be revised favorably for co-generation in advance.

• Analytical Science and Technology
• /
• v.5 no.4
• /
• pp.349-358
• /
• 1992

The direct determination of lead in the whole-blood by graphite furnace atomic absorption spectrometric analysis was carried out by using the sample which was diluted five-fold with 1% Triton X-100. Matrix modification was tried to remove the interferences of blood matrix and also to get the optimum analytical condition. Good agreement with certificated values in reference materials(bovine blood) supplied by comparison program in Japan was obstained when 1% $(NH_4)_2HPO_4$ as matrix modifier and ashing temperature, $700^{\circ}C$ were used or 1% $(NH_4)_2HPO_4$ and 0.1% $PdCl_2$ as matrix modifier and ashed at $700^{\circ}C$. Standard deviations were appeared as 2.2~6.3% for 1% $(NH_4)_2HPO_4$ and 3.1~9.1% for 1% $(NH_4)_2HPO_4$ and 0.1% $PdCl_2$ in the range of $31{\sim}624{\mu}gPb/l$.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.160-168
• /
• 2012

This study generated regression models to estimate the carbon storage and uptake from the urban deciduous landscape trees through a direct harvesting method, and established essential information to quantify carbon reduction from urban greenspace. Tree species for the study included Acer palmatum, Zelkova serrata, Prunus yedoensis, and Ginkgo biloba, which are usually planted as urban landscape trees. Tree individuals for each species were sampled reflecting various diameter sizes at a given interval. The study measured biomass for each part including the roots of sample trees to compute the total carbon storage per tree. Annual carbon uptake per tree was quantified by analyzing radial growth rates of stem samples at breast height. The study then derived a regression model easily applicable in estimating carbon storage and uptake per tree for the 4 species by using diameter at breast height(dbh) as an independent variable. All the regression models showed high fitness with $r^2$ values of 0.94~0.99. Carbon storage and uptake per tree and their differences between diameter classes increased as the diameter sizes got larger. The carbon storage and uptake tended to be greatest with Zelkova serrata in the same diameter sizes, followed by Prunus yedoensis and Ginkgo biloba in order. A Zelkova serrata tree with 15cm in dbh stored about 54kg of carbon and annually sequestered 7 kg, based on a regression model for the species. The study has broken new grounds to overcome limitations of the past studies which substituted, due to a difficulty in direct cutting and root digging of urban landscape trees, coefficients from the forest trees such as biomass expansion factors, ratios of below ground/above ground biomass, and diameter growth rates. Study results can be useful as a tool or skill to evaluate carbon reduction by landscape trees in urban greenspace projects of the government.

• Journal of the Korean Chemical Society
• /
• v.43 no.6
• /
• pp.644-650
• /
• 1999

Trace amount of cobalt in water samples was preconcentrated continuously with an organic precipitant and determined by flame atomic absorption spectrometry. The flow injection technique was used to preconcentrate cobalt by on-line direct precipitation with 1-nitroso-2-naphthol. The precipitation was dissolved with methyl isobutyl ketone (MlBK) and was sent to the flame. The optimum conditions for cobalt determination were determined and used to analyze Co samples. For 1.0 mL of sample, the enrichment factor was 13 and the sample throughput was about lO per hour for 0.5 ppm Co solution. The enrichment factor was increased to 68 fold for 10.0 mL. A semi-reference biologicaI sample was prepared and analyzed. The result was in good agreement with the expected value with RSD of 4%.