• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.432-437
• /
• 2005

An electric swing adsorption (ESA) process for recovering highly pure $CO_2$ from the mixed gases was tested. In this study, activated carbon fibers were used as an adsorbent. The activated carbon fibers showed fast adsorption rate and the high adsorption capacity for $CO_2$ adsorption under the condition of the ambient pressure. Activated carbon fiber with higher specific surface area was suitable to repeated adsorption-desorption cycle process, showing consistent breakthrough curve. Especially, the regeneration method by vacuum combined with ESA improved the performance of desorption process by an additional 17％ regeneration efficiency compared to a vacuum only method, and showed the high regeneration efficiency at comparatively low 7-8 Wh energy.

• Fire Science and Engineering
• /
• v.18 no.3
• /
• pp.9-17
• /
• 2004

The values of physical properties of the inert gases of Ar, $N_2$, $CO_2$ were calculated by the empirical equations. The regression coefficients were obtained by the experimental data and the resulting calculated values. For the empirical equation with a lower regression coefficient, a new correlation was suggested. At an atmosphere pressure, the empirical equation was confirmed by the experimental values for the viscosity, density, saturated pressure, and surface tension of Ar, $N_2$, $CO_2$. The correlation coefficients of the empirical equations proposed in this work was higher than 0.99.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.24-30
• /
• 2010

This study utilises repeated numerical tests to understand the effects of variable near-surface conditions on time-lapse seismic surveys. The numerical tests were aimed at reproducing the significant scattering observed in field experiments conducted at the Naylor site in the Otway Basin for the purpose of $CO_2$ sequestration. In particular, the variation of elastic properties of both the top soil and the deeper rugose clay/limestone interface as a function of varying water saturation were investigated. Such tests simulate the measurements conducted in dry and wet seasons and to evaluate the contribution of these seasonal variations to seismic measurements in terms of non-repeatability. Full elastic pre-stack modelling experiments were carried out to quantify these effects and evaluate their individual contributions. The results show that the relatively simple scattering effects of the corrugated near-surface clay/limestone interface can have a profound effect on time-lapse surveys. The experiments also show that the changes in top soil saturation could potentially affect seismic signature even more than the corrugated deeper surface. Overall agreement between numerically predicted and in situ measured normalised root-mean-square (NRMS) differences between repeated (time-lapse) 2D seismic surveys warrant further investigation. Future field studies will include in situ measurements of the elastic properties of the weathered zone through the use of 'micro Vertical Seismic Profiling (VSP)' arrays and very dense refraction surveys. The results of this work may impact on other areas not associated with $CO_2$ sequestration, such as imaging oil production over areas where producing fields suffer from a karstic topography, such as in the Middle East and Australia.

• Journal of the Korean Chemical Society
• /
• v.38 no.4
• /
• pp.302-308
• /
• 1994

Homogeneous catalytic oxidation of hydrazobenzene was investigated by employing pentadentate Schiff base complexes such as [Co(II)(Sal-DPT)(H$_2$O)] and [Co(II)(Sal-DET)(H$_2$O)] in oxygen-saturated methanol solvent. The oxidation product of hydrazobenzene(H$_2$AB) was trans-azobenzene(trans-AB). The rate constants of oxidation reaction measured by UV-visible spectrophotometry were observed as $6.06{\times}10^{-3}sec^{-1}$ for [Co(II)(Sal-DPT)(H$_2$O)] and $2.50{\times}10^{-3}sec^{-1}$ for [Co(II)(Sal-DET)(H$_2$O)]. The mechanism of oxidation reaction for H$_2$AB by homogeneous activated catalysts has been proposed as following. H$_2$AB + Co(II)(L)(H$_2$O) + O$_2$ $\rightleftharpoons^K_{MeOH}Co(III)(L)O_2{\cdot}H_2AB + H_2O\longrightarrow^{k}Co(II)(L) + trans-AB + H_2O_2$ (L: Sal-DPT and Sal-DET)

• Journal of the Korean Magnetics Society
• /
• v.3 no.3
• /
• pp.185-189
• /
• 1993

급속응고법으로 제작된 비정질 $Fe_{85-x}Co_{x}Zr_{7}B_{7}Cu_{1}$ 합금의 열처리에 따른 구조 및 자기특성이 조사되었다. 비정질 $Fe_{85-x}Co_{x}Zr_{7}B_{7}Cu_{1}$ 합금은 $600^{\circ}C$이하의 열처리온도에서 약 10 nm의 초미세결정립이 형성된다. $600^{\circ}C$이상의 열처리 조건에서는 결정립크기가 급격히 증가하여 자기특성을 열화시킨다. $Fe_{85-x}Co_{x}Zr_{7}B_{7}Cu_{1}$ 합금의 최적열처리온도는 Fe-Zr-B초미세결정립합금에 비하여 낮으며, 결정립크기 또한 감소한다. 이는 Cu의 첨가에 기인하는 것으로 판단된다. 최적열처리조건에서 $Fe_{80}Co_{5}Zr_{7}B_{7}Cu_{1}$ 초미세결정립합금의 포화자화 및 f=50 kHz, $B_{m}=0.2\;T$에서 측정한 투자율 및 철손은 각각 157.3 emu/g(1.5 T), $1.8{\times}10^{4}$ 및 13 W/kg으로 자기특성이 가장 우수하다.

• Electrical & Electronic Materials
• /
• v.1 no.3
• /
• pp.269-277
• /
• 1988

P형 Si(100)로 제작한 MOS 커패시터에 $Co^{60}$-.gamma.선을 주사한 후 고주파 C-V특성 곡선으로 부터 방사선 조사에 의해 유발된 산화막안의 트랩전하의 거동 및 Si- $SiO_{2}$계면에서의 트랩밀도 분포의 변화를 검토하였다. 산화막 느랩전하는 .gamma.선 흡수선량 증가와 더불어 증가하다가 $10^{7}$ rad 부근에서부터 서서히 포화하는 경향이 나타났으며 게면트랩밀도의 분포모양은 흡수선량의 증가와 더불어 전형적인 이그러진 W자형에서 넓혀진 V자형 분포로 변화하였으나 최소값은 항상 진성페르미준위( $E_{i}$)부근에 있었으며 그 밀도는 1.0*$10^{11}$~7.5*$10^{11}$[개/$cm^{2}$/eV]로 계산되었다. 또한, 일정 바이어스전압하에서의 조사선량에 따른 $V_{fb}$ 의 변화는 현저하지는 않았으나 바이어스 전압을 +12V로 인가할 때 변화방향의 반전상태가 관측되었다. 그 이유로는 Si측의 계면 부근에서 일어난 눈사태 전자가 산화막내로 주입됨에 따라 도너형 양전하의 수가 감소되기 때문으로 추정되었다.되었다.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.9
• /
• pp.69-83
• /
• 2012

A study on strength decrease due to water contents through infiltration has been conducted with 9 rocks of high frequency in Korea. It has been proved that a strength decrease through infiltration has high dependence on rock strengths ranges while the species of rock have no impact. It has been found that the weaker the rocks are, the more sensitive the strength decreases are, and that water content of 0.5% corresponds to strength decrease of almost 50%. Another finding is that most rocks have a failure when water content is about one quarter~one half of its saturation. It has been shown that the weakening of rock strength due to water content results from leaching and the weakening of bonding strength of cementation materials.

• Electrical & Electronic Materials
• /
• v.5 no.4
• /
• pp.439-445
• /
• 1992

최근 광자기 기록매체로 주목받고 있는 RE-TM계 비정질 박막을 T $b_{x}$ (F $e_{0.9}$ $Co_{0.1}$)$_{100-x}$ (x=14, 17, 20, 23, 27[at%])의 조성비를 갖는 모합금을 만든후 진공증착방법으로 합금박막을 제작하였다. 각시료의 조성에 따른 자기광학효과를 알아보기 위하여 80K부터 600K에서 포화자화( $M_{s}$ )와 보자력( $H_{c}$)에 대한 온도의존성과 자기이방성상수(Ku), Polar Kerr 이력곡선을 측정하였다. 또한 Curie 온도 근처에서 열처리 시간에 따른 자기 토크 곡선의 변화를 분석 함으로써 합금박막 표면의 산화정도를 정성적으로 평가할 수 있었다. 실험결과 T $b_{22.72}$(F $e_{68.78}$ $Co_{8.5}$)인 시료가 상온에서 8.4KOe의 보자력을 가졌으며 T $b_{x}$(x=23[at%])인 경우가 가장 큰 수직자기이방성을 나타냈다. Polar Kerr 이력곡선은 Tb함량 x=25~26[at%]에서 부호가 반전됨을 알 수 있었다.다.다.다.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.3
• /
• pp.574-582
• /
• 1998

Background: Bronchofiberscopy is a procedure with a chance of airway irritation and it may cause pathophysiologic changes of respiratory system. So we tried to evaluate the influence of bronchofibercopy on $O_2$ saturation, ABGA and PIT by patient's basal status and procedure type. Method: $O_2$ saturation was measured every 1 minute from the left index finger tip with percutaneous oximetry. ABGA was done before and right after the bronchofiberscopy and PIT was done before and within 10 minutes after the bronchofiberscopy. Results: The mean time for bronchofiberscopy procedure was 14.5mim and $SaO_2$ maximally fall to 89.0 below 8% of the baseline after mean time of 8.4min, which was recovered at the end of the procedure. $SaO_2$ change amount was 8.4 % on Non-$O_2$ supply group, which was lower compared to 6.4 % of the $O_2$-supply group without statistically significance. Biopsy Group and BAL group showed more $SaO_2$ fall than washing only group. The level of $PaO_2$ and FEV1 of the patient didn't influence significantly on $SaO_2$ fall during the procedure. ABGA taken before and after the bronchofiberscopy showed mild fall of $PaO_2$ and mild rise of $PaCO_2$. Whereas PFT showed decrease of FEV1(P<0.05) and increase of RV without changes in airway resistance and pulmonary diffusion capacity. Comparing before and after the bronchofiberscopy, the washing group showed no significant changes on PIT, while the biopsy group and the BAL group showed increase of RV & decrease of $FEV_1$ after the bronchofiberscopy. BAL group showed more changing tendency rather than biopsy group although not statistically significant. Conclusion: Bronchofiberscopy is considered as a relatively safe procedure, but it would be better to be done with $O_2$ supply especially in the patient with low $PaO_2$ and in the case of biopsy and BAL.

• Journal of the Korean Magnetics Society
• /
• v.10 no.2
• /
• pp.74-80
• /
• 2000

CoCr$_{x}$ Fe$_{2-x}$O$_4$(0.0$\leq$x$\leq$1.0) ferrites have been fabricated by sol-gel method. The crystallographic and magnetic properties of the samples were investigated by means of x-ray diffraction, scanning electron microscophy, Mossbauer spectroscopy and vibrating sample magnetometry. The structure of all the samples is cubic spinel type and the lattice constant decrease with increasing Cr content. The substituted Cr ions were located only in the B-site. The particle size also decreases with increasing Cr content. The Mossbauer spectra consist of two sextets due to Fe$^{3+}$ions at A- and B sites for 0.0$\leq$x$\leq$0.6, while, a paramagnetic doublet appears for 0.8$\leq$x$\leq$1.0. The magnetic hyperfine field decreases with increasing Cr content. The relaxation spectra was shown at 0.8$\leq$x$\leq$1.0 in CoCr$_{x}$ Fe$_{2-x}$O$_4$. The coercivity decreases drastically, while, the saturation magnetization decreases linearly with increasing x.ing x.