• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.286-293
• /
• 1998

Two methods were used to enhance the adsorption capacity of activated carbons. One is to impregnate activated carbons with chemical compounds which have a good affinity for $CO_2$. The other is to activate by heat-treating after impregnation with KOH on activated carbons(AC). The chemical compounds impregnated on AC were alkali metal, alkaline earth metal, and transition metal chlorides. The adsorption capacity of $CO_2$ on AC impregnated with these metals was less than that of pure AC. These compounds have not the chemical affinity for $CO_2$ and obstruct the micropore of AC. The experiment of breakthrough for $CO_2$ on AC impregnated with KOH showed the increase of the adsorbed amount of $CO_2$ in influent gases containing water vapor. This means that KOH adsorbes $CO_2$ gas. However, the adsorbents impregnated with KOH had not the reproducibility because of the production of $K_2CO_3$ by the reaction of KOH with $CO_2$. The amount of $CO_2$ adsorbed on the heat-treated AC at $800^{\circ}C$ increased with the amount of impregnation. The adsorption capacity of $CO_2$ was the largest when the ratio of weight of KOH to AC equal to 4. The isosteric heat of adsorption was calculated by the equation of Clausius-Clapeyron form adsorption capacity data of $CO_2$ for the temperature change. In addition, the characteristics of $CO_2$ breakthrough curve were surveyed for the change of flow rate and concentration.

• Journal of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.165-170
• /
• 1990

The reactivity and structural change of optical active $[Co(edta)]^- and [Co(Hedta)Cl]^- complexes has been investigated in the presence of several catalyst (H^+, OH^-, and Cd^{2+}). When Δ-[Co(edta)]- complex was reacted with H^+ or OH^- as the catalyst, G-ring opening of ligand in the complex was accompanied, and then, optically active, [Co(Hedta)OH_2], and racemic mixture, [Co(edta)OH]_2- were produced. When (-)546-[Co(Hedta)Cl]- complex was reacted with Cd^{2+}$ as the catalyst, the Ring-close was accompanied, and Δ-[Co(edta)]- complex was produced, which the absolute configuration was retained.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.316-321
• /
• 2022

Since 2019, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has spread rapidly, infecting millions of people worldwide. On March 11, 2020, the World Health Organization declared coronavirus disease (COVID-19) a pandemic owing to the worldwide spread of SARS-CoV-2, which created an unprecedented burden on the global healthcare system. In this context, there are increasing concerns regarding co-infections with other respiratory viruses, such as the influenza virus. In this study, clinical data of patients infected with SARS-CoV-2 and other respiratory viruses were compared with patients infected with SARS-CoV-2 alone. The hematology and blood biochemistry results of 178 patients infected with SARS-CoV-2 , who were tested on admission, were retrospectively reviewed. In patients with SARS-CoV-2 and adenovirus co-infection, C-reactive protein levels were elevated on admission, whereas lactate dehydrogenase (LDH), prothrombin time, international normalized ratio, activated partial thromboplastin clotting time, and bilirubin values were all within the normal range. Moreover, patients with SARS-CoV-2 and human bocavirus co-infection had low LDH and high bilirubin levels on admission. These findings reveal the clinical features of respiratory virus and SARS-CoV-2 co-infections and support the development of appropriate approaches for treating patients with SARS-CoV-2 and other respiratory virus co-infections.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.3
• /
• pp.281-289
• /
• 2015

Carbonation of concrete causes reduction of pH and subsequently causes steel corrosion for reinforced concrete structure. However, for plain concrete structure or PC product, it can lead to a decrease in porosity, high density, improvement of concrete, shrinkage-compensation. Recently, based on this theory, research of $CO_2$ curing effect has been performed, but it was mainly focused on its effects on compressive strength using only ordinary portland cement. Researches on $CO_2$ curing effect for concrete containing $CO_2$ reactive materials such as ${\gamma}-C_2S$, MgO haven't been investigated. Therefore, this study has performed experiments under water-binder ratio 40%, and the replacement ratios of ${\gamma}-C_2S$ and MgO were 90%. Micro-chemical analysis, measurement of compressive strength according to admixtures and $CO_2$ curing were investigated. Results from this study revealed that higher strength was measured in case of $CO_2$ curing compared with none $CO_2$ curing for plain specimen indicating difference between 1.08 and 1.26 times, in case of ${\gamma}-C_2S$ 90, MgO 90 specimen, incorporating high volume replaced as much as 90%, it was proven that when applying $CO_2$ curing, higher strength which has difference between 14.56 and 45.7 times, and between 6.5 and 10.37 times was measured for each specimen compared to none $CO_2$ curing. Through micro-chemical analysis, massive amount of $CaCO_3$, $MgCO_3$ and decrease of porosity were appeared.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.183-183
• /
• 2011

리튬 이온 배터리의 cathode 및 electrolyte 재료로 사용되는 LiCoO2을 sputtering이나 pulsed laser deposition을 이용하여 박막으로 증착하기 위해서는 target이 필요하다. Target은 원료 분말을 가압 성형한 후 고온에서 소결하여 제조된다. LiCoO2 target 제조과정에서 고밀도를 얻기 힘들고 Li 성분의 증발이 일어난다. 또한 Li2O 분말은 흡습성이 매우 크다. 본 연구에서는 시간과 온도를 조절하여 최적화된 소결 과정을 통해 target의 밀도가 이론밀도와 근사한 값을 갖도록 하고, LiCoO2 또는 Co3O4 분말에 각각 흡습성이 낮은 Li2CO3 분말을 첨가하여 Li 성분을 조절하였다. Li과 Co의 조성비가 1:1-2:1인 고밀도의 LiCoO2 target을 제조하여 박막 증착 후 Li과 Co의 조성비가 1:1이 되도록 하였다.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.58-68
• /
• 2011

As part of basic studies of monitoring carbon dioxide ($CO_2$) storage using electrical and seismic surveys, laboratory experiments have been conducted to measure resistivity and P-wave velocity changes due to the injection of $CO_2$ into water-saturated sandstone. The rock sample used is a cylinder of Berea sandstone. $CO_2$ was injected under supercritical conditions (10 MPa, $40^{\circ}C$). The experimental results show that resistivity increases monotonously throughout the injection period, while P-wave velocity and amplitude decrease drastically due to the supercritical $CO_2$ injection. A reconstructed P-wave velocity tomogram clearly images $CO_2$ migration in the sandstone sample. Both resistivity and seismic velocity are useful for monitoring $CO_2$ behaviour. P-wave velocity, however, is less sensitive than resistivity when the $CO_2$ saturation is greater than ~20%. The result indicates that the saturation estimation from resistivity can effectively complement the difficulty of $CO_2$ saturation estimations from seismic velocity variations. By combining resistivity and seismic velocity we were able to estimate $CO_2$ saturation distribution and the injected $CO_2$ behaviour in our sample.

• Journal of the Korean Institute of Gas
• /
• v.26 no.4
• /
• pp.9-17
• /
• 2022

This paper is the continuation of our previous paper, which we refer to as numerical analysis of phase behavior and flow properties in an injection tubing during gas phase CO₂ injection. Our study in this paper show the results during supercritcal CO₂ injection under the same project. Geological CO₂ storage technology is one of the most effective method to decrease climate change due to high injectivity and storage capacity and economics. A demonstration-scale CO₂ storage project was performed in a deep aquifer in the Pohang basin, Korea for a technological development in a large-scale CO₂ storage project. A problem to consider in the early stage design of the project was to analyze CO₂ phase change and flow characteristics during CO₂ injection. To solve this problem, injection conditions were decided by calculating injection rate, pressure, temperature, and thermodynamic properties. For this research, we simulated and numerically analyzed CO₂ phase change from liquid to supercritical phase and flow characteristics in injection tubing using OLGA program. Our results provide discharge pressure and temperature conditions of CO₂ injection combined with a pressure of an aquifer.

• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.244-249
• /
• 2011

In this study, performance and economic analysis of 500 MWe coal-fired power plant with $CO_{2}$ capture process was performed. For this purpose, chemical absorption method which is commercially available and most suitable for thermal power plant was studied and a criteria for technical and economic assessment of power plants suggested by IEA Greenhouse Gas R&D Programme was used. And we performed the sensitivity analysis focused on regeneration energy which exceed half of the total capture energy. Based on MEA(Monoethanoleamine) as a main chemical solvent and 3.31 GJ/ton$CO_{2}$ regeneration energy in the stripper, net power efficiency was reduced from 41.0% (no capture) to 31.6%(with capture) and the cost of $CO_{2}$ avoided was estimated 43.3 $/ton$CO_{2}$. And in case of 2.0 GJ/ton$CO_{2}$ regeneration energy, the cost of $CO_{2}$ avoided was calculated as 36.7 $/ton$CO_{2}$.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.2
• /
• pp.105-112
• /
• 2020

As sprout vegetables of interest growing, its maintaining the quality of the technology was needed to solve the problem of increasing growth and maintain quality after harvest. This experiment proved that the quality of radish sprout vegetable was affected by CO₂ treatment during cultivation. Thus, the effect of CO₂ treatment during cultivation on postharvest quality of radish sprout vegetable was investigated in terms of the quality changes in weight loss, gas partial pressure, SPAD, hue angle external appearance during storage at polypropylene film (thickness 30 ㎛) at 10℃. CO₂ treatment used the way to gas with 700 ppm or carbonated water with 700 ppm and 1,400 ppm. The study revealed that growths on CO₂ treated plant were more than those of non-treatment on stem length. After harvesting, the CO₂ treated plant and control growing little different characteristics on fresh weight, plant length and so on. However, there were no differences between the CO₂ treated plant and control on the Fv/Fm and SOD (superoxide dismutase). In gas partial pressure, the O₂ consumption and CO₂ accumulation of the CO₂ treated plant tended to be more than that of non-treated plant. This study also checked that after packaging, the effects of CO₂ treatment during cultivation on the quality of radish sprout vegetable was not significant. However, there were tended to CO₂ treatments were lower value compared to control on SPAD, hue angle and general appearance. CO₂ treatments of radish sprouting vegetable before harvest were improve growth of stem length, but ones were not improving the maintain of quality on radish sprout vegetable during shelf-life period. The results indicated that CO₂ treatment only affected stem elongation until radish sprout vegetable its growth.

• Korean Journal of Materials Research
• /
• v.10 no.11
• /
• pp.738-741
• /
• 2000

Univorm epitaxial $CoSi_2$layers have been grown in situ on a (100) Si substrate at temperatures near$ 600^{\circ}C$ by reactive chemical vapor deposition of cyclopentadienyl dicarbonyl cobalt, (Co(η(sup)5-C(sub)5H(sub)5) ($CO_2$). The growth kinetics of an epitaxial $CoSi_2$layer on al Si(100) substrate was investigated at temperatures ranging from 575 to $650^{\circ}C$. In initial deposition stage, plate-like discrete $CoSi_2$spikes were nucleated along the <111> directions in (100) Si substrate with a twinned structure. The discrete $CoSi_2$plates with both {111} and (100) planes grew into an epitaxial layer with a flat interface on (100) Si. For epitaxial $CoSi_2$growth on (100) Si, the activation energy of the parabolic growth was found to be 2.82 eV. The growth rate seems to be controlled by the diffusion of Co through the $CoSi_2$layer.