• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.5
• /
• pp.9-16
• /
• 2022

Syngas, also known as synthesis gas, synthetic gas, or producer gas, is a combustible gas mixture generated when organic material (biomass) is heated in a gasifier with a limited airflow at a high temperature and elevated pressure. The present research was aimed at modifying the existing LPG engine generator for fully operated syngas. During this study, the designed gasifier-powered woodchip biomass was used for syngas production to generate power. A 6.0 kW LPG engine generator was modified and tested for operation on syngas. In the experiments, syngas and LPG fuels were tested as test fuels. For syngas production, 3 kg of dry woodchips were fed and burnt into the designed downdraft gasifier. The gasifier was connected to a blower coupled with a slider to help the air supply and control the ignition. The convection cooling system was connected to the syngas flow pipe for cooling the hot produce gas and filtering the impurities. For engine modification, a customized T-shaped flexible air/fuel mixture control device was designed for adjusting the correct stoichiometric air-fuel ratio ranging between 1:1.1 and 1.3 to match the combustion needs of the engine. The composition of produced syngas was analyzed using a gas analyzer and its composition was; 13~15 %, 10.2~13 %, 4.1~4.5 %, and 11.9~14.6 % for CO, H₂, CH₄, and CO₂ respectively with a heating value range of 4.12~5.01 MJ/Nm³. The maximum peak power output generated from syngas and LPG was recorded using a clamp-on power meter and found to be 3,689 watts and 5,001 watts, respectively. The results found from the experiment show that the LPG engine generator operated on syngas can be adopted with a de-ration rate of 73.78 % compared to its regular operating fuel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.1
• /
• pp.58-67
• /
• 1992

Optical absorption and photoluminescences(PL) of MgGa2Se4 and MgGa2Se4 : Co2+ single crustals were guown by the Bridgman method have been investigated in the visible and near-in frared regions. The optical absorption spectrum showed three absorption peak at 760 nm(13158nm, -1, 1.63eV), 1640nm(6097cm-1, 0.75eV).and 2500nm(4000cm-1,0.49eV) which are assigned the electronic transitions between the ground state and excited states of Co2+ ions with Td sym-metry in MgGa2Se4 host lattice. In PL spectrum the visible emission bands as well as the infrared emission band in these single cuystals are obserned. The visible emission bands are explained due to the radiative transitions of electrons from quasi continusly distributed tarps below the bottom of the conduction band to acceptor levels above the top of the valence band in the proposed energy level scheme. At the same time, it is considered that the infrated emission bands are attributed to electron transitions from the deep levels to the acceptor levels. The mechanism of the optical transition os well explained in terms of the energy diagram of MgGa2Se4.

• Resources Recycling
• /
• v.17 no.1
• /
• pp.51-58
• /
• 2008

Artificial mattes were prepared with adding pyrite or chalcopyrite as sulfur sources with Cu-Ni-Co-Fe alloy. The major phases identified by X-ray diffraction pattern were $(FeSi)_9S_8$, $CuFeS_2$, FeS, $Co_4S_3$, $Ni_3S_2$ and $Cu_2S$ for both mattes, and the matte prepared by adding chalcopyrite showed the higher peak of $Cu_2S$ due to high content of copper. Under optimum conditions, more than 95% copper, 90% nickel and 90% cobalt were extracted into leaching solution and sulfur concentration in the mattes did not much affect the leaching efficiency of the metals. The increase of the amount of pyrite or chalcopyrite added decreased pH in leaching solution and increased the concentration of iron ion dissolved in the leaching solution and the amount of residue.

• IMMUNE NETWORK
• /
• v.9 no.1
• /
• pp.20-26
• /
• 2009

We previously reported that $IFN-{\gamma}$ producing T cell responses induced by the combined therapy of DNA vaccine and lamivudine for one year are important for the induction of sustained virological response (SVR). However, $IFN-{\gamma}$ production is not sufficient to predict sustained viremia control in chronic hepatitis B (CHB) carriers treated. Methods: Twelve CHB carriers were intramuscularly immunized 12 times at a 4-week interval with 8mg of HBV DNA vaccine during the standard lamivudine treatment (100mg/daily/1 year). The level of cytokines during and after the combined therapy in plasma of all 12 CHB carriers treated was determined by each ELISA kit. Six out of 12 CHB carriers revisited the clinic, and their HBV DNA levels were examined. Results: The combined therapy increased plasma IL-12 and IL-12/p40 ratio during the treatment (baseline vs. peak level: $41.8{\pm}8.3$ vs. $163.1{\pm}29.2\;pg/ml$; p<0.01 and $0.96{\pm}0.25$ vs. $3.58{\pm}0.86$; p<0.01, respectively), and the peak level of plasma IL-12 and IL-12/p40 ratio was evoked at 6 to 10 months during the combined therapy. In particular, CHB carriers with SVR had two and three-fold higher level of the peak plasma IL-12 and plasma IL-12/p40 ratio than non-virological responders (NVRs), respectively ($218.0{\pm}41.4$ vs. $108.1{\pm}28.6\;pg/ml$; p=0.09 and $5.35{\pm}1.38$ vs. $1.80{\pm}0.29$; p<0.05, respectively), while p40 level was consistent during the combined therapy. In addition, there was no significant temporal correlation between the peak IL-12/p40 ratio and the elevation of serum alanine amino-transferase (ALT) in this study, contrast to $IFN-{\alpha}$ therapy which induced peak IL-12 level following ALT flares. Conclusion: Our results indicate that the combined therapy induces the increase of plasma IL-12 and IL-12/p40 ratio, which are associated with long-term SVR in CHB carriers.

• Fire Science and Engineering
• /
• v.27 no.4
• /
• pp.21-26
• /
• 2013

This study was performed to test the combustive properties of Pinus rigida plates treated with bis-(dimethylaminomethyl) phosphinic acid (DMDAP), bis-(diethylaminomethyl) phosphinic acid (DEDAP), and bis-(dibuthylaminomethyl) phosphinic acid (DBDAP). Pinus rigida specimens were painted in three times with 15 wt% bis-(dialkylaminoalkyl) phosphinic acid solutions at the room temperature. After drying specimen treated with chemicals, combustive properties were examined by the cone calorimeter (ISO 5660-1). It is supposed that the combustion-retardation properties were improved by the partial due to the treated bis-(dialkylaminoalkyl) phosphinic acids in the virgin Pinus rigida. Especially, the specimens treated with chemicals showed both the lower total smoke release rate (TSRR) ($16.94{\sim}18.92m^2/m^2$) and lower $CO_{2mean}$ production (1.98~2.09 kg/kg) than those of virgin plate. However the specimens treated with chemicals showed both the higher peak mass loss rate (PMLR) (0.1250~0.1297 g/s) and higher 1st-smoke production rate (SPR) (0.0153~0.0167 g/s) than those of virgin plate. Compared with virgin Pinus rigida plate, the specimens treated with the bis-dialkylamimoalkyl phosphinic acids showed partially low combustive properties.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.1
• /
• pp.9-16
• /
• 2013

The growth and production of Aulichthys japonicus (6.70~15.32 cm TL) were investigated in an eelgrass bed of Dongdae Bay, Korea throughout 2006. A total 888 A. japonicus were collected with a small beam trawl. Growth in fish total length was expressed by the von Bertalanffy's growth equation as: $L_t=24.8257(1-e^{-0.5583(t+0.4816)})$. The densities, biomass, daily, annual production, and P/B ratio were $0.01{\pm}0.009/m^{-2}$, $0.17{\pm}0.16g/m^2$, $0.00006{\pm}0.00006g$ AFDW/$m^2$/day, 0.02g AFDW/$m^2$/yr, and 0.12, respectively. Monthly variation in production of A. japonicus was large; the peak occurred at July, September and November 2006 (0.000182, 0.000127 and 0.000123 g AFDW/$m^2$/day), where as the lowest value was 0.000003g AFDW/$m^2$/day at April and May 2006. Monthly change in production of A. japonicus was positive correlated with number of individuals, biomass and growth rate.

• Journal of Pharmaceutical Investigation
• /
• v.17 no.4
• /
• pp.175-181
• /
• 1987

To increase the dissolution rate of furosemide, chitin and chitosan which are widely occurring biodegradable natural materials were used as drug carriers. The ground mixtures of furosemide with chitin or chitosan were prepared by grinding in a ball mill. The ground mixture showed a faster and more enhanced dissolution rate than the physical mixture or intact furosemide. The crystalline peaks of furosemide disappeared in the ground mixtures indicating the production of amorphous form. The comparison of infrared spectra of the physical mixture and the ground mixture showed an interaction such as association between the functional groups of furosemide and chitin or chitosan in the molecular level. The weight losses in TGA curves showed all the same patterns. However, the endothermic peak due to the fusion of furosemide in DTA curve disappeared in the ground mixture indicating the different thermal property. The dissolution of furosemide from ground mixtures was fast in the order of chitosan and then chitin. The co-grinding technique with chitin or chitosan provided a promising way enhancing the dissolution rate of practically insoluble drug.

• Korean Chemical Engineering Research
• /
• v.54 no.5
• /
• pp.665-670
• /
• 2016

This study deals with the possible degradation of toluene and acetic acid when subjected to cell-free enzyme system from the toluene degrading bacteria Pseudomonas putida and acetic acid degrading bacteria Cupriavidus necator. P. putida produces toluene dioxygenase only under the existence of toluene in culture medium and toluene is degraded to cis-toluene dihydrodiol by this enzyme. C. necator produces acetyl coenzyme A synthetase-1 and converts acetic acid to acetyl CoA in order to synthesize ATP to need for growth or PHA which is biodegradable polymer. In case of toluene degradation, the experiment was conducted before and after production of toluene dioxygenase as this enzyme, produced by P. putida, is an inducible enzyme. Toluene was detected using gas chromatography (GC). Similar amount of toluene was found in control group and before production of toluene dioxygenase (experimental group 1). However, reduction in toluene was detected after the production of toluene dioxygenase (experimental group 2). Acetic acid was detected through application of gas chromatography-mass spectrometer (GC-MS). The results showed the acetic acid peak was not detected in the experimental group to apply cell-free enzyme system. These results show that the cell-free enzyme system obtained from P. putida and C. necator retained the ability to degrade toluene and acetic acid. However, P. putida needs to produce the inducible enzyme before preparation of the cell-free enzyme system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1638-1652
• /
• 2000

Prolific females require better nutrition and feeding practice because of larger litter size and the substantial decline in body fat. Life-time pig output will be compromised if body protein and fat are not properly managed. First litter females are especially vulnerable because they can loose ${\geq}15%$ of whole-body protein. Conservation of body protein mass during first lactation minimizes wean to estrus interval and increases second litter size (up to 1.2 pigs). The ability to influence litter-size by amino acid nutrition is a new dimension in our understanding. A P2 fat depth below 12 mm at farrow and below 10 mm at wean compromised wean to estrus interval (>2 d) and next litter size (0.5 to 1.5 pigs) in sows. It is now clear that a 'modest' excess of feed during the first 72 h of pregnancy decreases embryo viability so that the potential for an increased litter size at birth is not realized. The capacity for milk production by prolific young sows is 25% higher than the standard used previously (NRC, 1988). First litter females averaged 9.82 kg milk/d for a 21 d lactation. Second and third litter counterparts averaged 10.35 kg/d. Milk production was 95% of peak by 10 d of lactation and sows were in greatest negative energy and lysine balance during the first 6 d. Nearly 45% of the total loss in body protein occurred within the first 6 d, but this could reduced to 30-35% by using a more aggressive feeding strategy after parturition. There appear to be 2 phases in lactation for lysine need (d 2-12 vs 12-21). Feeding to the higher level alleviates the second litter size decline. The lysine requirement for lactation can be predicted with accuracy, but we are not able to predict the second limiting amino acid. Mammary uptake of valine relative to lysine and recent work with practical diets suggest that the recent NRC (1998) pattern is realistic and that threonine and valine could be co-limiting for corn-soy diets for prolific sows nursing 10-11 pigs. Empirical studies are needed to refine the ideal pattern so that synthetic lysine can be used with more confidence. Milk fat output for the elite sow is extraordinary and poses an unnecessarily high energetic cost. Methods that reduce mammary fat synthesis will benefit the sow and may enhance piglet growth.

• Horticultural Science & Technology
• /
• v.30 no.6
• /
• pp.673-679
• /
• 2012

This study was conducted to examine the effect of artificial light source and photoperiod on the growth of leaf lettuce (Lactuca sativa L.) 'Seonhong Jeokchukmyeon' in a closed-type plant production system. Seedlings were grown under 3 light sources, fluorescent lamp (FL, Philips Co. Ltd., the Netherlands), WL #1 (Hepas Co. Ltd., Korea), and WL #2 (FC Poibe Co., Ltd., Korea), each with 3 photoperiods, 12/12, 18/6, and 24/0 (Light/Dark). An irradiance spectrum analysis showed that FL has various peaks in the 400-700 nm range, while WL #1 and WL #2 have only one monochromatic peak at 450 and 550 nm, respectively. The greatest plant height, fresh and dry weights were obtained in the 24/0 (Light/Dark) photoperiod. The 24/0 (Light/Dark) photoperiod treatment promoted vegetative growth of the leaf area. Length of the longest root, number of leaves, fresh weight, and total anthocyanin contents were greater in FL than in either WL #1 or #2. The greatest chlorophyll fluorescence (Fv/Fm) was found in the 12/12 (Light/Dark) photoperiod with FL treatment. The energy use efficiency of the LED increased by about 35-46% as compared to FL. Results suggest a possibility of LED being used as a substitute light source for fluorescent lamp for lettuce cultivation in a plant factory system.