• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.87-87
• /
• 2000

이온빔 증착에 있어서 전자의 조사가 이온빔 증착기구에 미치는 영향에 대한 연구는 지금까지 보고 되어지지 않았다. 특히 전자의 조사가 증착층의 물성에 영향을 미칠 수 있느지에 대하여 정량적인 결과를 실험을 통하여 제시한 보고는 내가 아는 한 존재하지 않는다. 한편 이와같이 박막 증착에 있어서 전하가 증착되어지는 박막의 물성에 미칠 수 있는 영향에 대해서는 많은 과학자들의 관심사이기도 하다. 본 실험에서는 kaufman ion gun을 이용하여 질소 양이온을, 그리고 Cs+ ion gun을 이용하여 탄소 음이온을 조사하고 이들을 이용하여 CN 박막을 증착하였다. 질소 양이온의 에너지는 100eV, 이온밀도는 70$\mu$A/$\textrm{cm}^2$로 고정하고, 탄소 이온빔(80$\mu$A/$\textrm{cm}^2$)의 에너지를 200cV까지 변화시켜가며 증착하였다. 이때 증착층의 특성에 음 전하의 효과를 유발하기 위하여 350~360$\mu$A/$\textrm{cm}^2$의 전자빔을 이온빔 증착과 동시에 추가로 조사하였고 이의 특성을 전자빔을 조사하지 않고 증착한 CN 박막의 특성과 서로 비교하였다. 또한 증착 표면의 전하 축적에 의한 입사 이온빔의 에너지 감소에 의한 영향을 방지하기 위하여 증착되는 Si 기판에 HF (300kHz, 3.5V) bias를 가하여 주었다. 전자빔의 조사와 동시에 이루어진 CN 박막의 증착은 입사하는 탄소 음 이온빔의 에너지가 80eV에서 180eV 사이일때 원자밀도의 향상과 질소함량의 증가, 그리고 sp2C-N 결합대비 sp3C-N 결합의 향상이 이루어졌음을 확인하였다. 이는 이온빔 충돌에 의하여 피코쵸 정도의 시간대에 이루어지는 박막내의 collision cascade 영역에 이에 의하여 생긴 결함부위에 유입된 음 전하가 위치하면 전하주위의 원자와 polarization을 형성하고 이에 의하여 탄소와 질소의 결합을 형성하는데 필요한 자유에너지의 감소를 수반하는 방향으로 원자의 배열이 이루어지기 때문으로 사료된다. 이와같이 이온빔 에너지가 이온빔 증착 기구의 주요한 인자로 널리 인식되고 있는 kinetic bonding process에 있어서 이온 에너지에 의하여 activation energy barrier를 넘은후, 전자의 조사가 자유에너지를 낮추는 방향으로 최종 결합경로를 조절할 수 있기 때문에 이온빔 증착을 조절할 수 있는 또 하나의 주요한 인자로 받아들여질 수 있으리라 판단된다. 이온빔 프로세스에 의한 DLC 혹은 탄소관련 필름을 형성하는데 있어서 입사 이온빔의 에너지에 의하여 수반되는 thermal spike 혹은 외부 열원에 의한 가열은 박막층의 흑연화를 수반하기 때문에 박막의 sp3 특성을 향상시키기 위하여 회피하여야 할 요소이지만 thermal spike에 의한 국부 영역의 가열과 같은 불가피한 인자가 존재하는 상황에서 전자에 의한 추가 전하의 조사에 의한 최종결합경로의 선택적 조절은 박막의 화학적 결합과 물리적 특성을 향상시킬 수 있는 중요한 방법이 될 수 있다고 판단된다.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.12
• /
• pp.3549-3552
• /
• 2010

The complex formation between diazocalix[4]dipropyl (1) and diazocalix[4]crown-6 ether (2) with alkali, alkaline earth and transition metal ions was investigated by voltammetry. Electrochemical properties of compounds 1 and 2 and their selectivity toward metal ions were evaluated in $CH_3CN$ solution by comparison of voltammetric behaviors of two phenols in each compound. Compounds 1 and 2 showed almost same voltammetric behavior which is two irreversible oxidation peaks caused by intramolecular hydrogen bonding between two phenols in 1 and 2. While, however, upon interacting with various metal ions, 1 with two propyl ether groups showed no significant changes in voltammetry, 2 with crown ether group caused significant voltammetric changes upon the addition of $Ba^{2+}$ to 2. Their behavior is closely related to the complex formation by entrapment of metal ion into crown ether cavity, and ion-dipole interaction between metal ion and two phenolic groups in calix[4]crown-6.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.3
• /
• pp.133-137
• /
• 1993

A high-performance liquid chromatographic assay using ion-pair reverse-phase system was developed for the separation of acebutolol and acebutolol acetyl metabolite in plasma. A ion-pair reversephase system consisting of an ODS-bonded silica column and a mixture of 20% $CH_3CN$, 0.1% $H_3PO_4$, 0.035 M heptanesulfonic acid and 0.005 M tetrabutylammonium hydrogen sulfate as the mobile phase were used. Triamterene was employed as an internal standard. Based on 0.2 ml of plasma, the detection limits were 10.4 ng/ml for acebutolol and 10.3 ng/ml of acebutolol acetyl metabolite at the signal-to-noise ratio of 3:1.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.33-38
• /
• 1998

TiYN coated high speed steel tools have been developed and their tool lifes were assessed. First yttrium alloyed titanium target was manufactured, then using the arc ion plating(AIP) technique TiYN coating was deposited onto high speed steel substrate. Three kinds of varying thickness of TiYN coated tools were prepared. Cutting tests were carried out with theses tools and for comparison with the commercially available uncoated, TiN, TiCN and TiAlN coated tools. During the cutting tests flank wear width vs. cutting time was measured. It has been revealed that the newly developed TiYN coated tools show superior tool life characteristics to others.

• Corrosion Science and Technology
• /
• v.10 no.2
• /
• pp.65-70
• /
• 2011

DLC is considered as the candidate material for application of moving parts in automotive components relatively in high pressure and temperature operating conditions for its high hardness with self lubrication and chemical inertness. The properties of interlayer between the substrate and the DLC film were studied. Arc ion plating method have been employed to deposit onto substrate and sputtering method was used for synthesizing DLC onto interlayer. Among these six types of interlayer, deposited DLC film onto TiCN showed excellent value for characteristics. From the results of analysis for physical properties of DLC films, it seems that the adhesion forces were more important factors than intrinsic mechanical properties such as hardness, roughness and wear resistance of DLC films. AFM(Atomic Force Microscope) was used for understanding roughness of DLC films. Hardnesses of the coating layers were identified by nano-indentation method and adhesions were checked by scratch method.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.6
• /
• pp.444-449
• /
• 1987

Solvent effects on gas phase reactions of methoxide ion with substituted ethylenes, $CH_2$ = CHR where R = CN, CHO and $NO_2$, are investigated theoretically using the AM1 method. Results show that the methoxide approaches in-plane in all reactions, but subsequently rotate out-of-plane to form tetrahedral complexes in additon reactions. All reactions of a bare methoxide are found to be exothermic, the exothermicity being the greatest in the ${\beta}$-addition, in which the excess energy is forced to be contained within the ${\beta}$-adduct rendering extreme instability. However a part of the excess energy can be removed by a solvate molecule giving a stable complex prior to the product formation. The hydride transfer processes were found to be unfavorable due to the high activation barriers. The ${\alpha}-H^+$ abstraction process from acrylonitrile becomes endothermic as a result of monosolvation of the methoxide, in agreement with experimental results.

• Applied Chemistry
• /
• v.16 no.1
• /
• pp.25-28
• /
• 2012

A determination method of cyanide ion (CN^-) using nickel complexation reaction by continuous monitoring system. The mechanical parameters and chemical conditions of the complexation reaction were investigated prior to application of continuous monitoring system for determination of cyanide. On the optimized conditions, the calibration curve was linear over the range from 5.0×10^-6 to 1.0×10^-4 M. In this range, 2.40% of the reproducibility (RSD, n=3) was obtained. The limit of detection (3σ/s) was calculated to be 1.8×10^-6 M.

• The Korea Journal of Herbology
• /
• v.22 no.2
• /
• pp.97-102
• /
• 2007

Objectives : This study presents a high performance liquid chromatography - electrospray ionization-mass spectrometer (HPLC-MS/MS) methods for the quantitative and qualitative analysis of various active components in Samul-tang, which is composed of four crude herbs. Methods : HPLC-ESI-MS/MS for the determinations of paeoniflorin and 5-HMF (5-hydroxymethyl 2-furaldehyde) in the Samul-tang, the separation method was performed on an COSMOS1L 5C18-AR-Il (2.0 X 150 mm I.D.) column by gradient elution with 0.1% acetic acid and 5% CH3CN in water (A)-0.1% acetic acid and 5% H20 in CH3CN (B) as the mobile phase at a flow-rate of 300 ${\mu}L/min$ with detection at quadrupole mass spectrometer. The all marker substances were always detected as the base peaks in the positive ion mode. Results : The paeoniflorin of Paeoniae Radix in Samul-tang showed a strong base peak [M+H2O]+ in the positive detection mode to give the following as; paeoniflorin (498.109 [M+H2O]+, 479.8 [M]+, 301 [M-glucose]+, 179.3 [glucose]+). Based on the HPLC retnetion time and MS of standard compounds confirmed the identity of active compounds in Rehmanniae Radix Preparata as follows; 5-HMF (127.0[M+H]+, 109.3 [M-OH]+) in the positive ion mode. Conclusion : According to the above results, HPLC-ESI-MS method permits assignment of tentative structures such as paeoniflorin and 5-HMF in the Samul-tang.

• The Korean Journal of Mycology
• /
• v.31 no.3
• /
• pp.168-174
• /
• 2003

In this study, Cordyceps militaris was grown in a liquid medium containing colloidal chitin. A chitinase was purified from the supernatant or cultured medium by ammonium sulfate fractionation, DEAE-Sephadex A-25 and Sephadex G-50 column chromatography. Optimum temperature and pH of this enzyme were $35^{\circ}C$ and 5.5, respectively. The molecular weight of the chitinase was estimated to be 48.5 kDa by SDS-PAGE and its Km value was 0.57 mM. The activity of this enzyme was inhibited by $Cu^{2+},\;Mn^{2+},\;Hg^{2+},\;Zn^{2+},\;CO_{3}^{2-},\;SO_4^{2-},\;CN^-,\;ion,\;and\;OCN^-$ maleic anhydride, acetic anhydride or N-bromo succinimide, especially strongly inhibited by sodium cyanate for 84.0 percentage. But its activity wag slightly stimulated by $Mg^{2+}\;and\;K^+$ ion, respectively. The products formed during hydrolysis of the hexa-N-acetylchitohexaose with this enzyme were N,N'-diacetylchitobiose and N,N',N'-triacetylchitotriose. These results imply that this purified enzyme may be an endo-chitinase.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.117-123
• /
• 2021

The effects of electrolyte concentration on the electrochemical properties of Fe4[Fe(CN6)]3(FeHCF) as a novel active material for the electrode of aqueous zinc-ion batteries was investigated. The electrochemical reactions and structural stability of the FeHCF electrode were significantly affected by the electrolyte concentration. In the electrolyte solutions of 1.0-7.0 mol dm-3, the charge-discharge capacities increased with increasing electrolyte concentration, however gradually decreased as the cycle progressed. On the other hand, in the 9.0 mol dm-3 electrolyte solution, the initial capacity was relatively small, however showed good cyclability. Additionally, the FeHCF electrode after five cycles in the former electrolyte solutions, had a change in crystal structure, whereas there was no change in the latter electrolyte solution. This suggests that the performance of the FeHCF electrode is greatly influenced by the hydration structure of zinc ions present in electrolyte solutions.