• 한국재료학회지
• /
• 제29권7호
• /
• pp.437-442
• /
• 2019

Green $BaSi_2O_2N_2:0.02Eu^{2+}$ phosphor is synthesized through a two-step solid state reaction method. The first firing is for crystallization, and the second firing is for reduction of $Eu^{3+}$ into $Eu^{2+}$ and growth of crystal grains. By thermal analysis, the three-time endothermic reaction is confirmed: pyrolysis reaction of $BaCO_3$ at $900^{\circ}C$ and phase transitions at $1,300^{\circ}C$ and $1,400^{\circ}C$. By structural analysis, it is confirmed that single phase [$BaSi_2O_2N_2$] is obtained with Cmcm space group of orthorhombic structure. After the first firing the morphology is rod-like type and, after the second firing, the morphology becomes round. Our phosphor shows a green emission with a peak position of 495 nm and a peak width of 32 nm due to the $4f^65d^1{\rightarrow}4f^7$ transition of $Eu^{2+}$ ion. An LED package (chip size $5.6{\times}3.0mm$) is fabricated with a mixture of our green $BaSi_2O_2N_2$, and yellow $Y_3Al_5O_{12}$ and red $Sr_2Si_5N_8$ phosphors. The color rendering index (90) is higher than that of the mixture without our green phosphor (82), which indicates that this is an excellent green candidate for white LEDs with a deluxe color rendering index.

• 수산해양교육연구
• /
• 제19권1호
• /
• pp.1-7
• /
• 2007

The purpose of this study was to investigate geochemical characteristics of surface sediments in the Keum river estuary adjacent to coastal area. For this study we collected the 21 surface sediments samples. Mean size of surface samples was $3.24{\sim}6.65{\phi}$ on inner estuary and was $2.15{\sim}3.42{\phi}$ on outside estuary. Surface samples were composed of silt on inner estuary and were composed of sand which was more larger than $4{\phi}$ on outside estuary. Most major elements except CaO, $Na_2O$ showed good relationships between variation of contents and grain size. Contents of $Al_2O_3$, $Fe_2O_3$, MgO, $K_2O$, $TiO_2$, $P_2O_5$ and $M_nO$ were increased predominately owing to the variation of mean size of surface samples. Contents of Co, Cr, Cu, Li, Sr, Zn, La, Ce, Pb, Rb, Nd have a good relationships with grain size but Ba, Th, Sm have not. All of major and minor elements contents except $K_2O$ and Ba were less than world mean contents of shallow surface sediments but apprehend a high pollution possibility on silt sediments in the estuaries.

• 한국세라믹학회지
• /
• 제30권8호
• /
• pp.643-650
• /
• 1993

NdAl3(BO3)4 have been developed for miniature solid state laser material. Single crystals of NdAl3(BO3)4 were grown by TSSG technique using BaB4O7 flux. The effects of growth conditions such as cooling rate, seed orientation and rotation speed on crystal quality and the morphology were studied. At the cooling rate of 2.4$^{\circ}C$/day and the crystal rotation speed of 30~40rpm with the seed orientation in <201> or <100> directions, transparent and light violet colored crystals in size of 10$\times$15$\times$20㎣ with well developed {010}, {111}, {111}, {021}, {001}, {102}, {112}, {021} faces were obtained. By X-ray diffraction analysis, the space group was determined as C2/c, and the X-ray powder data was obtained.

• 한국재료학회지
• /
• 제31권10호
• /
• pp.562-568
• /
• 2021

(Bi_1/2Na_1/2)TiO₃ (BNT)-based ceramics are considered promising candidates for actuator application owing to their excellent electromechanical strain properties However, to obtain large strain properties, there remain several issues such as thermal stability and high operating fields. Therefore, this study investigates a reduction of operating field in (0.98-x)Bi_1/2Na_1/2TiO₃-0.02 BiAlO₃-xSrTiO₃ (BNT-2BA-100xST, x = 0.20, 0.21, 0.22, 0.23, and 0.24) via analyses of the microstructure, crystal structure, dielectric, polarization, ferroelectric and electromechanical strain properties. The average grain size of BNT-${\underline{2}}$BA-100xST ceramics decreases with increasing ST content. Results of polarization and electromechanical strain properties indicate that a ferroelectric to relaxor state transition is induced by ST modification. As a consequence, a large electromechanical strain of 592 pm/V is obtained at a relatively low electric field of 4 kV/mm in 22 mol% ST-modified BNT-2BA ceramics. We believe that the materials synthesized in this study are promising candidates for actuator applications.

• 자원환경지질
• /
• 제25권4호
• /
• pp.435-446
• /
• 1992

REE, major and trace elements analyses of the Jurassic Daebo granite and Cretaceous Bulguksa granite were carried out to interpet their petrogenesis and relationships between petrogenesis and tectonics. Analytical results are summarized as follows. (1) $SiO_2$ content of the Bulguksa granite (aver. 74.6%) are significantly higher than those of the Daebo granite (aver. 68.1%). Major elements of $TiO_2$, $Al_2O_3$, $P_2O_5$, CaO, MgO, Total FeO, and trace elements of Co, V and Sr are negatively correlated with $SiO_2$. Incompatible elements such as Ba, Sr, Y, Zr and HREE are contained differently in the Bulguksa granites distributed in between Okchon folded belt and Kyongsang sedimentary basin. (2) Trace element abundances show a good discrimination between two goups of granitic rocks. Ba, Sr and V are enriched in Daebo granites, while Zn and Cr are depleted in them. (3) Jurassic granites have quite different Eu anomalies and REE patterns from those of Cretaceous granites: Large negative Eu anomaly in the former and mild or absent Eu anomaly in the latter. The large Eu negative of Cretaceous granitic rocks are interpreted as a differentiated product of fractional crystallization of granitic magma from the upper mantle. Meanwhile, the Daebo plutonic rocks was resulted from the partial melting of subcrustal material or crustal contamination during ascending granitic magma from the mantle. Senario of igneous activities of Mesozoic age in South Korea was proposed based on Kula-Pacific ridge subduction model.

• 한국세라믹학회지
• /
• 제46권4호
• /
• pp.413-418
• /
• 2009

Glass systems based on Ca, Sr, Ba, and Zn modified alumino-boro silicates were investigated in order to improve the dielectric and mechanical properties of a typical LTCC (low temperature co-fired ceramic) which was developed for high frequency highly-integrated modules. The glass was prepared by a typical melting procedure and then mixed with cordierite fillers to fabricate glass/ceramic composite-type LTCC materials. The amount of cordierite filler was fixed at 50 volumetric%. For an optimal glass composition of 7.5% CaO, 7.5% BaO, 5% ZnO, 10% $Al_2O_3$, 30% $B_2O_3$, and 40% $SiO_2$ in mole ratio, the resultant LTCC composite showed a dielectric constant of 5.8 and a dielectric loss ($tan{\delta}$) of 0.0009 after firing at $900^{\circ}C$. An average bending strength of 160MPa was obtained for the optimal composition.

• 자원환경지질
• /
• 제29권3호
• /
• pp.257-267
• /
• 1996

One hundred of thirty volcanic rocks col1ected from the Jeju island， Jeongog， Guryongpo and other areas were analyzed for major elements and trace elements with Au by inductively coupled argon plasma and graphite furnace atomic absorptiom spectrometry. The Au content is the highest values (0.2~43.4 ppb, average; 10.34 ppb) from the Jeju island volcanic rocks and the lowest (0.5~11.0 ppb, average; 1.23 ppb) from the Guryongpo volcanic area. The content of Au tends to be higher in the Quarternary volcanic rocks than Tertiary or Cretaceous volcanic rocks. The Au content of the calc alkali volcanic rocks tends to increase from mafic to felsic volcanic rocks, but that of the alkalic volcanic rocks tends to increase from felsic to mafic volcanic rocks. The Au content of the volcanic rocks collected from the Jeju island shows the highest values in the feldspar olivine basalts. Elements or oxides which have positive or negative correlations with Au are Ag, Mo, Rb, V, Y, $K_2O$, MgO and $SiO_2$, but other elements analyzed are not shown correlations with Au. It has a tendency to show that samples from the Jeju with 5 ppb gold and more are plotted in the non-Dupal area and those with less than 5 ppb gold in the Dupal area, while those from the Jeongog with 5 ppb gold and more are plotted in the Dupal area and those with less than 5 ppb gold in the non-Dupal area, in the Ba/Nb-La/Nb, Zr/Nb-Ba/Nb diagrams. It shows that samples from the Jeju and Guryongpo with high gold content are plotted in the within-plate, while those with low gold content are plotted in the arc-related area, and those from the Jeongog are scattered in the $TiO_2-Al_2O_3$, $Zr/A1_2O_3-TiO_2/Al_2O_3$ diagrams.

• 자원환경지질
• /
• 제34권1호
• /
• pp.55-70
• /
• 2001

영광-김제 지역에는 두 가지 형의 화강암류가 분포한다. 하나는 NE-SW방향의 광주단층계에 연하여 발달된 정읍, 고창엽리상화강암이고, 다른 하나는 광주단층계의 서편으로 발달괸 변형 되지 않은 김제화강암과 영광화강암이다. $SiO_2$의 함량은 영광화강암은 62.8~74.0% 고창엽리상화강암은 64.5~74.4%, 정읍엽리상화강암은 64.5~70.2% 김제화강암은 63.4~72.0% 으로, 이들 화강암류는 중성암과 산성암 영역에 포함된다. 하커의 변화도에서 $SiO_2$의 증가에 따라 $Al_2O_3$, $Fe_2O_3$, MgO, CaO, $TiO_2$, $P_2O_{5}$, MnO는 감소하는 경향을 보이고 $K_2$O는 증가하는 경향을 보이는데, 이와 같은 결과는 화강암류에서 보이는 정상적인 분화경향을 나타낸다. AFM 삼각도에서 보면 각 화강암류는 칼크 -알칼린계열에 속함을 알 수 있다. 화강암류들을 norm값으로 구분한 Qz-Or-Pl 삼각도와 An-Ab-Or삼각도에 도시해보면, 각각에서 화강섬록암과 화강암의 영역에 도시됨을 알 수 있다. 미량성분은 $SiO_2$의 증가에 따라 Ba, Co, Li, Nb, Zn, Rb는 증가하는 경향을 보여주고, ACF diagram 과 $Na_2O$ vs $K_2O$ 변화도에서 연구지역의 화강암류는 I-type에 속함을 알 수 있다.

• 광물과 암석
• /
• 제34권1호
• /
• pp.1-14
• /
• 2021

운산 금 광상은 한반도의 3대(대유동 광상, 광양 광상) 금 광상중의 하나였다. 이 광상의 지질은 선캠브리아기의 변성퇴적암류와 중생대의 반상화강암으로 구성된다. 이 광상은 선캠브리아기의 변성퇴적암류와 중생대의 반상화강암내에 발달된 단층대를 따라 충진한 함 금 석영맥 광상으로 조산형 금 광상에 해당된다. 이 광상의 석영맥은 광물조합에 따라 1) 방연석-석영맥형, 2) 자류철석-석영맥형, 3) 황철석-석영맥형, 4) 페크마틱 석영맥형, 5) 백운모-석영맥형 및 6) 단순석영맥형으로 분류된다. 연구된 석영맥은 황철석-석영맥형이며 견운모화작용, 녹니석화작용 및 규화작용이 관찰된다. 백색운모는 유색대에서 백색석영, 황철석, 녹니석, 금홍석, 모나자이트, 저어콘, 인회석, 칼리장석 및 방해석 등과 함께 세립질 내지 중립질 입단으로 산출된다. 이 백색운모의 화학조성은 (K0.98-0.86Na0.02-0.00Ca0.01-0.00Ba0.01-0.00 Sr0.00)1.00-0.88(Al1.70-1.57Mg0.22-0.09Fe0.23-0.10Mn0.00Ti0.04-0.02Cr0.01-0.00V0.00Ni0.00)2.06-1.95 (Si3.38-3.17Al0.83-0.62)4.00O10(OH2.00-1.91F0.09-0.00)2.00로써 이론적인 이중팔면체형 운모류 값보다 Si가 높고 K, Na, Ca는 낮다. 이 광상의 엽리상 석영맥에서 산출되는 백색운모의 화학조성 변화는 팬자이틱(phengitic) 또는 Tschermark 치환[(Al3+)VI+(Al3+)IV <-> (Fe2+ 또는 Mg2+)VI+(Si4+)IV] 및 직접적인 (Fe3+)VI <-> (Al3+)VI 치환에 의해 일어났음을 알 수 있다. 엽리상 석영맥에서 산출되는 녹니석의 화학조성은 (Mg1.11-0.80Fe3.69-3.14Mn0.01-0.00Zn0.01-0.00K0.07-0.01Na0.01-0.00Ca0.04-0.01Al1.66-1.09)5.75-5.69 (Si3.49-2.96Al1.04-0.51)4.00O10 (OH)8로써 이론적인 녹니석보다 Si 함량이 높다. 이 녹니석의 화학조성 변화는 팬자이틱(phengitic) 또는 Tschermark 치환(Al3+,VI+Al3+,IV <-> (Fe2+ 또는 Mg2+)VI+(Si4+)IV) 및 팔면체적 Fe2+ <-> Mg2+ (Mn2+) 치환에 의해 일어났음을 알 수 있다. 따라서 운산 광상의 엽리상 석영맥 및 변질광물은 조산운동 시 연성전단(ductile shear) 시기에 형성되었음을 알 수 있다.

• 한국재료학회지
• /
• 제23권1호
• /
• pp.59-66
• /
• 2013

Opal glass samples having different chemical compositions were synthesized and transparent glass was obtained after melting. The effects of $TiO_2$, $BaF_2$, and $CeO_2$ content on the color of the opal glass were studied by observing images of the opal samples and analyzing the results via ultraviolet visible spectroscopy and color spectrometry. The aesthetic properties of the opal glass were determined by studying the transmittance of visible light in the 400 nm to 700 nm range. The basic chemical composition of opal glass was $SiO_2$ 52.9 wt%, $Al_2O_3$ 12.35 wt%, $Na_2CO_3$ 15.08 wt%, $K_2CO_3$ 10.35 wt%, $Ca_3(PO)_4$ 4.41 wt%, $MgCO_3$ 1.844 wt%, $LiCO_3$ 2.184 wt%, and $TiO_2$ 0.882 wt%. The glass samples were prepared by varying the weight percentage of $TiO_2$, $BaF_2$, and $CeO_2$. The transmittance of visible light was decreased from 95 % to 75 % in the glass samples in which $TiO_2$ content was increased from 0 to 3.882 wt%. In the blue spectrum region, as the content of $TiO_2$ increased, the reflectance value was observed to become higher. This implies that $TiO_2$ content induces more crystal formation and has an important effect on the optical properties of the glass. The opalescence of opal samples that contained $CeO_2$ or $BaF_2$ is stronger than that in the samples containing $TiO_2$. Opal glass samples comprising $TiO_2$ had tetragonal lattice structures; samples including $CeO_2$ as an additive had cubic lattice structures (FCC, $CeO_2$).