• 한국세라믹학회지
• /
• 제31권9호
• /
• pp.995-1004
• /
• 1994

Phase relation and microwave dielectric properties of the system BaO.(Nd1-xSmx)2O3.TiO2 (n=4, 5) were studied. With n=5 (1 : 1 : 5), Ba2Ti9O20 and TiO2 formed in case of X$\leq$0.7, and Ba2Ti9O20 and Sm2Ti2O7 formed at X=1.0 as the second phases dispersed in fine-grained orthorhombic matrix phase. With n=4 (1 : 1 : 4). on the contrary, only fine grains of an ortho-rhombic phase were observed irrespective of Nd/Sm ratio. The compositions of these two stable orthorombic phases having distinct lattic constants even with the same Nd/Sm ratio were estimated as 4BaO.5(Nd1-xSmx)2O3.18TiO2 and BaO.(Nd1-xSmx)2O3.4TiO2 with n=5 and n=4 in the system BaO.(Nd1-xSmx)2O3.TiO2, respectively. Consequently the composition BaO.(Nd1-xSmx)2O3.5TiO2 lies in the compatible triangle of 4BaO.5(Nd1-xSmx)2O3.18TiO2 and the second phases mentioned above. The microwave dielectric properties (~4 GHz) of BaO.(Nd1-xSmx)2O3.5TiO2 can be controlled effectively by adjusting Sm content : with increasing X from 0 to 0.7, both dielectric constant and the temperature coefficient of resonant frequency decreased monotonically from 82 to 65 and from 91 (ppm/$^{\circ}C$) to -19(ppm/$^{\circ}C$), respectively, while unloaded Q(Qo) remained constant at about 2,600.

• 한국세라믹학회지
• /
• 제41권11호
• /
• pp.842-850
• /
• 2004

BaO$_2$-TiO$_2$-환원제-입자제어제계에서 자전연소합성법을 이용한 BaTiO$_3$ 분말의 제조에 대하여 고찰하였다. 환원제로서 C, Mg를 사용하였고, 입자제어제로서 NaCl을 사용하였다. 자전연소합성법을 이용한 BaTiO$_3$ 분말의 제조에 있어 최적의 반응계에서 환원제의 종류와 농도, 입자제어제, 반응량의 변화에 따른 생성물의 영향을 조사하였다. 최적의 반응계 및 조성은 Ae반응 분위기에서 BaO$_2$+TiO$_2$+0.1Mg+0.2C+0.75NaCl이었다. 희석제로서 첨가된 NaCl은 연소온도의 조절 뿐 아니라 반응생성물의 입도를 제어하는 효과를 나타냄을 알 수 있었다. 최적의 조건에서 제조된 순수 BaTiO$_3$ 분말의 입도는 약 0.5 $mu extrm{m}$ 이하였으며, 반응량을 증가시킬수록 균일한 반응성을 나타내었다 제조된 BaTiO$_3$ 분말의 유전특성을 측정하기 위하여 130$0^{\circ}C$, 2시간동안 대기중에서 소결실험을 행하였고 이때 상온에서의 유전상수는 약 2290이었고, 큐리점(129$^{\circ}C$)에서의 유전상수는 약 13800을 나타내었다.

• 한국결정학회지
• /
• 제10권1호
• /
• pp.56-65
• /
• 1999

수열법을 이용하여 미세한 BaTiO3 분말을 합성하였다. Ti원으로 두 종류의 TiO2 gel을 사용하였으며 그 크기와 모양을 BaTiO3 합성에 주는 영향을 고찰하였다. 구형의 단분산 TiO2 gel을 사용하여 Ba(NO3)2 수용액에서 수열 합성한 BaTiO3 분말은 입자크기도 균일하였으며 응집이 일어나지 않아않았다. 비교적 낮은 pH에서 구형 TiO2 gel을 사용하여 합성한 BaTiO3 분말은 구형을 그대로 유지하였지만 높은 pH에서 합성한 BaTiO3 분말은 그 구형이 분해되었다. KOH양이 많아지고, 합성시간이 길어짐에 따라 합성된 BaTiO3 분말의 크기는 커졌으며 그 c/a 값도 증가하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.127-130
• /
• 2001

The $BaTiO_3+xNb_2O_5$(x=6, 8, 10wt%) ceramics were prepared by conventional mixed oxide method. The structural properties of the $BaTiO_3+Nb_2O_5$ ceramics with the sintering temperature and addition of $Nb_2O_5$ were investigated by XRD and SEM. Increasing the sintering temperature, the $2{\theta}$ value of BT(110) peak was shifted to the lower degree and intensity of the $Ba_6Ti_2Nb_8O_{30}$ (133) peak was increased. Increasing the addition of $Nb_2O_5$, the intensity of $BaTiNb_4O_{13}$ (201) peak was decreased and $Ba_6Ti_2Nb_8O_{30}$ (133) peak was increased. The grain size of the $BaTiO_3+Nb_2O_5$ ceramics sintered at $1500^{\circ}C$ were almost uniform.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 SMICS 2004 International Symposium on Maritime and Communication Sciences
• /
• pp.57-59
• /
• 2004

The melting temperature and critical temperature (Tc) of YBa$_2$Cu$_3$Ox with deferent content impurities of PbO and BaPbO$_3$ were studied. When the PbO was used as addition in YBa$_2$Cu$_3$Ox, although the melting point could be reduced, the superconductivity (the transition wide, ΔTc) became poor. From the XRD pattern of the sintered mixture of YBa$_2$Cu$_3$Ox and PbO it was known that there is a reaction between YBa$_2$Cu$_3$Ox and PbO, and the product is BaPbO$_3$. In the process of the reaction the superconducting phase of YBa$_2$Cu$_3$Ox was decreased and in the sample BaPbO$_3$became the main phase. Therefore the superconductivity was reduced. BaPbO$_3$was chosen as the impurity for the comparative study. The single phase BaPbO$_3$was synthesized by the simple way from both mixtures of BaPbO$_3$and PbO, BaPbO$_3$and PbO$_2$. Deferent contents of BaPbO$_3$(10%, 20%, 30%) were added in the YBa$_2$Cu$_3$Ox. By the phase analysis in the XRD patterns it was proved that there were not reactions between YBa$_2$Cu$_3$Ox and BaPbO$_3$. When BaPbO$_3$was used as impurity in YBa$_2$Cu$_3$Ox the superconductivity was much better than PbO as impurity in YBa$_2$Cu$_3$Ox But the melting point of YBa$_2$Cu$_3$Ox with BaPbO$_3$could not be found when the temperature was lower than 1000 $^{\circ}C$ in the DTA measurement.

• 한국자기학회지
• /
• 제16권6호
• /
• pp.283-286
• /
• 2006

고밀도 자기기록용 Ba-페라이트/$SiO_{2}$ 자성박막에서 계면확산 장벽으로써 ${\alpha}-Al_{2}O_{3}$ 버퍼층의 역할을 연구하였다. 열처리동안 $1900{\AA}$의 두께를 가진 비정질 Ba-페라이트/$SiO_{2}$ 박막에서 계면확산은 약 $700^{\circ}C$에서 일어나기 시작하였다. 열처리온도를 $800^{\circ}C$까지 증가시켰을 때, 계면확산은 자기특성을 저하시킬 정도로 급격히 진행되었다. 고온에서의 계면확산을 억제하기 위하여, $110{\AA}$ 두께의 ${\alpha}-Al_{2}O_{3}$ 버퍼층을 Ba-페라이트/$SiO_{2}$ 박막의 계면에 증착하여 사용하였다. Ba-페라이트/${\alpha}-Al_{2}O_{3}/SiO_{2}$ 박막에서는 $800^{\circ}C$의 고온까지 열처리하여도 계면확산이 심각하게 일어나지는 않았다. ${\alpha}-Al_{2}O_{3}$ 버퍼층에 의하여 계면확산이 억제되기 때문에 Ba-페라이트 자성박막의 포화자속밀도와 보자력이 향상되었다. 따라서 Ba-페라이트/$SiO_{2}$ 박막의 계면에서 ${\alpha}-Al_{2}O_{3}$ 버퍼층은 $SiO_{2}$ 기판 성분의 계면확산 장벽으로 사용될 수 있다.

• 한국세라믹학회지
• /
• 제26권4호
• /
• pp.493-498
• /
• 1989

High purity, submicron BaTiO3 powder was prepared by a hydrothermal technique using Ba(OH)2.8H2O, TiCl4 and NH4OH as starting raw materials. The submicron BaTiO3 powder was synthesized at 130~23$0^{\circ}C$ for 2.5h to yield highly crystalline particles with a narrow particle distribution. The mole ratio of Ba(OH)2.8H2O/TiO(OH)2 was 1.5. It is possible to obtain BaTiO3 with Ba : Ti=1.00$\pm$0/01. The samples densified well at 13$25^{\circ}C$, showing a uniform and fine grain structure. The grain size ranged between 0.3 and 0.5${\mu}{\textrm}{m}$. The products obtained by hydrothermal treatment at various temperatures from 130 to 23$0^{\circ}C$ were characterized by XRD, DTA, BET and SEM etc.

• 한국세라믹학회지
• /
• 제24권1호
• /
• pp.41-46
• /
• 1987

When barium titanate was synthesized in soild-solid reaction the abnormal expansion occurred from 900$^{\circ}C$ to 1100$^{\circ}C$. The equi-molecular mixture of BaCO3 and TiO2 was sintered from 800$^{\circ}C$ to 1300$^{\circ}C$ on the condition of air, vacuum and CO2 atmosphere. After that the specimens were tested closely with XRD, Dilatometer, SEM and EDS. The result indicated that; 1. The crystal phase which was concerned with expansion of BaTiO3 was Ba2TiO4 as the intermediate crystal phase. 2. The formation of Ba2TiO4 was affected by the firing atmosphere. 3. The expansion occurred when BaTiO3 changed to Ba2TiO4 and pore also expanded by the expansion of BaTiO3 body just as the model of expansion.

• 식물조직배양학회지
• /
• 제27권2호
• /
• pp.101-107
• /
• 2000

야콘의 절편체로부터 탈분화 조건을 규명하고, 잎의 절편체로부터 재분화 및 기내관아 형성조건을 조사하기 위하여 절편체를 배양하였다. 야콘의 잎으로부터 캘러스 형성에 MS배지가 $\frac{1}{2}$MS 및 B$_{5}$ 배지보다 효과적이었다. 잎, 엽병 및 측아 절편체로부터의 캘러스 형성률은 2,4-D 1.0, 2.0 mg/L에 kinetin 또는 BA를 0.2, 0.4 mg/L 혼용처리구가 NAA 1.0, 2.0 mg/L에 kinetin 또는 BA를 각각 0.2, 0.4 mg/L 혼용처리구보다 캘러스 형성률이 높았다. 잎으로부터 형성된 캘러스는 BA 1.0 mg/L처리에서 70%의 캘러스 증식율을 보였다. BA 1.0, 2.0 mg/L 처리 시 계대배양이 약 3~4개월 이상 지속되면서 캘러스 증식과 함께 재분율이 63% 이상 되었으나 kinetin 처리구에서는 관찰할 수 없었다. BA의 첨가에 의해 치상 후 약 3~4개월이 경과하면서 기내 소관아를 형성하기 시작하여 약 5~6개월 후에는 많은 양의 기내관아를 얻을 수 있었는데, BA를 5 mg/L 첨가한 배지에서 82.8%로써 기내소관아 형성률이 가장 높았으며, BA의 함량 증가에 따라 기내소관아 형성률도 증가하는 경향이었다. 그러나 BA의 함량이 5 mg/L이상 증가함에 따라 잎이 두꺼웠으며 줄기는 절간장이 짧고 분화 후에 생육을 지속하지 못하고 고사하였다. 한편, BA를 2 mg/L첨가하고 sucrose 첨가량을 다르게 하였을 경우, 5% sucrose를 첨가한 배지에서 소관아 형성률이 88.0% 로써 일반적으로 사용하는 3% 처리의 60.0%에 비하여 약28%증가하였다. 포장에서 수확한 관아의 액아와 기내관아의 액아의 조직학적 관찰 결과 크기에 차이가 있을 뿐 형태는 같은 것으로 관찰되었다.

• 동굴
• /
• 제78호
• /
• pp.17-22
• /
• 2007

The melting temperature and critical temperature (Tc) of $YBa_2Cu_3O_x$ with deferent content impurities of PbO and $BaPbO_3$ were studied. When the PbO was used as addition in $YBa_2Cu_3O_x$, although the melting point could be reduced, the superconductivity (the transition wide, ${\Delta}T_c$) became poor. From the XRD pattern of the sintered mixture of $YBa_2Cu_3O_x$ and PbO it was known that there is a reaction between $YBa_2Cu_3O_x$ and PbO, and the product is $BaPbO_3$. In the process of the reaction the superconducting phase of $YBa_2Cu_3O_x$ was decreased and in the sample $BaPbO_3$ became the main phase. Therefore the superconductivity was reduced. $BaPbO_3$ was chosen as the impurity for the comparative study. The single phase $BaPbO_3$ was synthesized by the simple way from both mixtures of $BaCO_3$ and PbO, $BaCO_3$ and $PbO_2$. Deferent contents of $BaPbO_3$ (10%, 20%, 30%) were added in the $YBa_2Cu_3O_x$. By the phase analysis in the XRD patterns it was proved that there were not reactions between $YBa_2Cu_3O_x$ and $BaPbO_3$. When $BaPbO_3$ was used as impurity in $YBa_2Cu_3O_x$ the superconductivity was much better than PbO as impurity in $YBa_2Cu_3O_x$. But the melting point of $YBa_2Cu_3O_x$ with $BaPbO_3$ could not be found when the temperature was lower than $1000^{\circ}C$ in the DTA measurement.