• Bulletin of the Korean Chemical Society
• /
• 제23권8호
• /
• pp.1149-1153
• /
• 2002

CH4/CO2 dry reforming was carried out to make syn gas on the Ni/Al2O3 catalysts calcined at different temperatures. The Ni/Al2O3 (850 $^{\circ}C)$ catalyst gave good activity and stability w hereas the Ni/Al2O3 $(450^{\circ}C)$ catalyst showed lower activity and stability. The NiO/Al2O3 catalyst calcined at $850^{\circ}C$ for 16 h (Ni/Al2O3 $(850^{\circ}C))$ formed the spinel structure of nickel aluminate, which was confirmed by TPR. The carbon formation rate on the Ni/Al2O3 $(850^{\circ}C)$ catalyst was very low till 20 h, and then steeply increased with reaction time without decreasing the activity for CH4 reforming. The Ni/Al2O3 $(450^{\circ}C)$ catalyst showed high carbon formation rate at the initial reaction time and then, the rate nearly stopped with continuous decreasing the activity for CH4 reforming. Even though the amount of carbon deposition on the Ni/Al2O3 $(850^{\circ}C)$ catalyst was higher than that on the Ni/Al2O3 $(450^{\circ}C)$ catalyst, the activity for CH4ing was also high, which could be attributed to the different type of the carbon formed on the catalyst surface.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2420-2424
• /
• 2009

We have successfully demonstrated of metal-insulator-semiconductor (MIS) capacitors with $Al_2O_3/p-Si$ structures. The $Al_2O_3$ film was grown at $200^{\circ}C$ on H-terminated Si wafer by atomic layer deposition (ALD) system. Trimethylaluminum [$Al(CH_3)_3$, TMA] and $H_2O$ were used as the aluminum and oxygen sources. A cycle of the deposition process consisted of 0.1 s of TMA pulse, 10 s of $N_2$ purge, 0.1 s of $H_2O$ pulse, and 60 s of $N_2$ purge. The 5 nm thick $Al_2O_3$ layer prepared on Si substrate by ALD exhibited excellent electrical properties, including low leakage currents, no mobile charges, and a good interface with Si.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.67-70
• /
• 2000

Mechanical properties of (10%$AI_20_3{\cdot}SiO_2$+5%Ni)/Al hybrid composites fabricated by the reaction squeeze casting were compared with those of (15%$AI_20_3{\cdot}SiO_2$)/Al composites. Intermetallic compound formed by reaction between molten aluminum and reinforcing powder was uniformly distributed in the Al matrix. These intermetallic compounds were identified as $Al_3$NI using EDS and X-ray diffraction analysis. Microhardness and flexural strength of hybrid composites were higher than that of (15%$AI_20_3{\cdot}SiO_2$)/Al Composite. In-Situ fracture tests were Conducted on (15%$AI_20_3{\cdot}SiO_2$)/Al Composites and (10%$AI_20_3{\cdot}SiO_2$+5%Ni)/Al hybrid composites to identify the microfracture process. It was identified from the in-situ fracture test of (10%$AI_20_3{\cdot}SiO_2$+5%Ni)/Al composites, microcracks were initiated mainly at the short fiber / matrix interfaces. As the loading was continued, the crack propagated mainly along the separated interfacial regions and the well developed shear bands. It was identified from the in-situ fracture test of (10%$AI_20_3{\cdot}SiO_2$+5%Ni)/Al hybrid composites, microcracks were initiated mainly by the short fiber/matrix interfacial debonding. The crack proceeded mainly through the intermetallic compound clusters

• 한국세라믹학회지
• /
• 제39권1호
• /
• pp.68-73
• /
• 2002

$La_2O_3-Al_2O_3$(LAO)와 $La_2O_3-Al(OH)_3$(LAH)의 물질을 메카노케미칼 방법으로 분쇄하여 $LaAlO_3$세라믹스의 합성과 유전특성에 대하여 비교.조사하였다. $LaAlO_3$단일상을 얻기 위한 열처리온도는 LAO분말에서 $1300^{\circ}C$, LAH 분말은 $1000^{\circ}C$였다. 하소분말 중에 미 반응한 $La_2O_3$가 존재하면, 공기 중의 습기로 인하여 $La_2O_3$에서 $La(OH)_3$로 변하고,소결체의 밀도는 나빠진다. $1500^{\circ}C$에서 4시간 소결한 LAO 시료는 이론밀도의 97.3%이고, $1400^{\circ}C$에서 4시간 소결한 LAH시료는 98.3%였다. LAO시료는 입자의 크기가 불 균일하고 평균 입경은 4-5${mu}m$이며, LAH시료는 입자가 균일하고 크기가 $0.75{\mu}m$ 정도로 아주 작았다. 비유전율은 LAO와 LAH시료가 비슷하였고, 그 값은 약 22를 나타내었다. 그러나 LAH시료(0.0003)의 유전손실은 LAO시료 (0.001)보다 작았는데 이는 입자의 크기에 기인된다.

• 한국재료학회지
• /
• 제12권3호
• /
• pp.220-224
• /
• 2002

The oxide scales formed on $Ni_3Al$-7.8%Cr-1.3%Zr-0.8%Mo-0.025%B after oxidation at 900, 1000 and 110$0^{\circ}C$ in air were studied using XRD, SEM, EPMA and TEM. The oxide scales consisted primarily of $NiO,\; NiAl_2O_4,\;{\alpha}-Al_2O_3,\; monoclinic-ZrO_2,\; and \;tetragonal-ZrO_2$. The outer layer of the oxide scale was rich in Ni-oxides, whereas the internal oxide stringers were rich in Al-oxides and $ZrO_2$. Within the above oxide scales, Cr and Mo tended to exist as dissolved ions.

• 공업화학
• /
• 제20권5호
• /
• pp.522-526
• /
• 2009

다양한 금속(Ru, Mn, Co, Fe)을 $Al_2O_3$와 $CeO_2$에 담지한 촉매를 이용하여 1,2-Dichlorobenzen (1,2-DCB) 제거를 위한 촉매산화 실험을 실시하였다. 이와 더불어 동시에 NOx 제거가 이루어져 단일 촉매층에서 산화/환원 이원 기능이 가능한 촉매를 연구하고자 하였다. 실험결과 1,2-DCB 산화제거효율은 Ru/Co/$Al_2O_3$, Mn-Fe/$CeO_{2}$, 상용촉매인 Cr/$Al_2O_3$ 순으로 나타났다. 또한 1,2-DCB 산화제거효율이 가장 우수하였던 Ru/Co/$Al_2O_3$는 Chlorobenzene (CB)의 분해실험에서도 VOC 제거에 있어서 잘 알려진 Pt-Pd/$Al_2O_3$ 보다 우수한 활성을 나타내었다. 또한 $Cl_2$와 같은 생성물에 의하여 활성의 저하 및 황에 대한 내피독성과 내구성에서 우수한 결과를 얻을 수 있었다. NOx 제거에 있어서도 $260^{\circ}C$에서 NOx 전환율이 70% 정도로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.335-338
• /
• 1999

The effect of monoclinic $ZrO_2$(pure) and tetragonal $ZrO_2$ containing 5.35wt% $Y_2$$O_3$(Y-TZP) addition on the mechanical properties and thermal shock resistance of $Al_2$$O_3$ ceramic were investigated. The addition of $ZrO_2$(m) and Y-TZP increased sintering density of $Al_2$$O_3$. The vickers hardness increased with increasing the volume fraction of Y-TZP going through a maximum at 20wt%. The hardness of the specimens was found to be depend on the sintering density. With increasing the volume fraction of $ZrO_2$(m) and Y-TZP, the fracture toughness of the composite is increased. This result may be taken as evidence that toughening of ${Al_2}{O_3}$ can also be achieved by the transformation toughening and microcrack toughening of $ZrO_2$. The property of the& shock for ${Al_2}{O_3}$-$ZrO_2$ composites was improved by increasing the volume fraction of monoclinic $ZrO_2$(pure).Grain size increased with increasing the volume fraction of $ZrO_2$.

• 동력기계공학회지
• /
• 제12권3호
• /
• pp.60-65
• /
• 2008

This study aims at investigating the wear properties of thermally sprayed $Al/Al_2O_3$ metal matrix composite(MMC) coating against different counterparts. $Al/Al_2O_3$ MMC coatings were fabricated using a flame spray system on an Al 6061 substrate. Dry sliding wear tests were performed using the sliding speeds of 0.2m/s and the applied loads of 1 and 2 N. AISI 52100, $Al_2O_3$, $Si_3N_4\;and\;ZrO_2$ balls(diameter: 8mm) were used as counterpart materials. Wear properties of $Al/Al_2O_3$ MMC coatings were analyzed using a scanning electron microscope(SEM) and energy dispersive X-ray spectroscopy (EDX). It was revealed that wear properties of $Al/Al_2O_3$ composite coatings were much influenced by counterpart materials. In the case of AISI 52100 used as counterparts, the wear rate of composites coating layer increased according to the increase of the applied load. On the contrary, in the case of ceramics used as counterparts, the wear rate of composites coating layer decreased according to the increase of the applied load.

• 에너지공학
• /
• 제11권2호
• /
• pp.136-141
• /
• 2002

석탄가스화 복합발전용 고온건식 탈황제의 반응성을 개선하기 위하여 $Al_2$O$_3$를 지지체로사용한 ZnO/Al$_2$O$_3$ 탈황제를 제조하고 반응특성을 조사하였다. ZnO/Al$_2$O$_3$의 성분함량 및 소성온도에 따른 물리화학적 구조변화를 XRD로 관찰하였고 ZnO의 소결 및 열화로 인한 활성저하를 $Al_2$O$_3$의 함량과 소성온도를 변화시켜 개선할 수 있음을 탈황 및 재생반응실험을 통하여 확인하였다. 마지막으로 첨가제를 함유한 ZnO/Al$_2$O$_3$ 탈황제의 내구성실험에 의한 고온건식 탈황제로의 사용가능성을 실험적으로 확인하였다.

• 한국세라믹학회지
• /
• 제52권4호
• /
• pp.273-278
• /
• 2015

${\alpha}-Al_2O_3$ was synthesized by solvothermal synthesis using ${\alpha}-Al_2O_3$ seed, precursor of fine boehmite (Al(OOH)) or gibbsite ($Al(OH)_3$), and 1, 4-butanediol solvent. The seed content and precursor type were selected as variables in order to synthesize ${\alpha}-Al_2O_3$. The formation time of ${\alpha}-Al_2O_3$ was reduced and the size of the particles was decreased with addition of the seed. When the seed content was increased, the size of the synthesized ${\alpha}-Al_2O_3$ was reduced. Morphologies of the as-synthesized ${\alpha}-Al_2O_3$ with ${\alpha}-Al_2O_3$ seed were polyhedron-shaped, while the shape was plate-like or polyhedral without the seed, depending on the additives or the average particle size of the boehmite precursor. The aggregation of as-synthesized ${\alpha}-Al_2O_3$ from boehmite was smaller than that from gibbsite. As-synthesized ${\alpha}-Al_2O_3$, with 140 nm size, was obtained by using the seed and boehmite precursor.