• Title/Summary/Keyword: $Al_2O_3$ fiber

Search Result 122, Processing Time 0.018 seconds

Effect of Heat Treatments on the Chemical Compositions of Flesh in Chestnut Processing (밤 가공시(加工時) 열처리(熱處理) 방법(方法)이 과육성분(果肉成分)에 미치는 영향(影響))

  • Shin, Doo Ho;oh, Man Jin;Kim, Seung Yeol
    • Korean Journal of Agricultural Science
    • /
    • v.8 no.1
    • /
    • pp.117-125
    • /
    • 1981
  • The changes in chemical compositions of chestnuts were tested during processing in order to elucidate the effects of heat treatments such as boiling, steaming and roasting on the flesh compositions. The results obtained were as follows. 1. The chemical compositions of raw chestnuts were: moisture, 59-61%; total sugar, 24-27%; crude fat, 0.3%; crude fiber, 0.6-0.9%; ash, 1.0%; amino nitrogen, 0.3%; vitamin C, 20-22 mg%; and tannin, 40-48%. 2. The moisture contents were increased to 63.8% by the boiling and to 70.27% by the peeling and boiling from 59.41% of raw ones respectively, whereas decreased to 54.11% by the roasting. 3. Contents of crude protein were decreased to 8.04% by the peeling and boiling procedure from 8.72% of raw ones, and those of amino nitrogen also revealed a decreasing tendency by the heat treatments. However, no significant change was observed in crude fat content. 4. Total sugar contents were decreased by the peeling and boiling procedure approximately 3.0%, whereas reducing sugars were increased 2 to 3 times in the all treatments. 5. Vitamin C contents were decreased 72.0 to 78.0 % by the boiling procedure, 64.2% by the steaming, 51. 6% by the roasting as compared with the raw ones. Tannin contents were increased 11.0% by the boiling, and 46.0% by the roasting respectively, whereas decreased 22.0% by the peeling and boiling procedure. 6. The color was changed to brown with different degree, during the boiling, steaming and roasting procedure. The 0.1% solution of alum appeared to be effective in reducing the browning reaction during the heat treatments.

  • PDF

Studies on the Pulping Characteristics of Larchwood (Larix leptolepis Gordon) by Alkaline Process with Additives (첨가제(添加劑) 알칼리 법(法)에 의한 일본 잎갈 나무의 펄프화(化) 특성(特性)에 관(關)한 연구(硏究))

  • Lim, Kie-Pyo;Shin, Dong-Sho
    • Journal of the Korean Wood Science and Technology
    • /
    • v.7 no.2
    • /
    • pp.3-30
    • /
    • 1979
  • Larch ($\underline{Larix}$ $\underline{leptolepis}$ GORDON), one of the major afforestation species in Korea in view of its growing stock and rate of growth, is not favored as a raw material for pulp due to its low yield of pulp and difficulties with bleaching arising from the high content of extractives in wood, and the high heartwood ratio and the active phenolics, respectively. The purpose of this study is to investigate the characteristics of firstly pulping with various additives of cellulose protector for the yield of pulp, and secondly bleaching with oxygen for chlotination-alkali extraction of five stage-sequence to reduce chlorine compounds in bleaching effluents. The kraft cooking liquor for five age groups of larchwood was 18 percent active alkali with 25 percent sulfidity and 5 : 1 liquor-to-wood ratio, and each soda liquor for sap-and heart-wood of the 15-year-old larchwood was 18 percent alkali having one of the following cellulose protectors as the additive; magnesium sulfate ($MgSO_4$, 2.5%), zinc sulfate ($ZnSO_4$, 2.5%), aluminium sulfate ($Al_2(SO_4)_3$, 2.5%), potasium iodide (KI, 2.5%), hydroquinone (HQ, 2.5%), anthraquinone (AQ, 0.1%) and ethylene diamine (EDA, 2.5%). Then each anthraquinone-soda liquor for the determination of suitable cooking condition was the active alkali level of 15, 17 and 19 percent with 1.0, 0.5 and 0.1 percent anthraquinone, respectively. The cooking procedure for the pulps was scheduled to heat to 170$^{\circ}C$ in 90 minutes and to cook 90 minutes at the maximum temperature. The anthraquinone-soda pulps from both heartwood and sapwood of 15-year-old larchwood prepared with 0.5 percent anthraquinone and 18 percent active alkali were bleached in a four-stage sequency of OCED. (O: oxygen bleaching, D: chlorine dioxide bleaching and E: alkali extraction). In the first stage oxygen in atmospheric pressure was applied to a 30 percent consistency of pulp with 0.1 percent magnesium oxide (MgO) and 3, 6, and 9 percent sodium hydroxide on oven dry base, and the bleached results were compared pulps bleached under the conventional CEDED (C: chlorination). The results in the study were summarized as follows: 1. The screened yield of larch kraft pulp did not differ from particular ages to age group, but heartwood ratio, basic density, fiber length and water-extractives contents of wood and the tear factor of the pulp increased with increasing the tree age. The total yield of the pulp decreased. 2. The yield of soda pulp with various chemicals for cellulose protection of the 15-year-old larchwood increased slightly more than that of pure soda pulp and was slightly lower than that of kraft pulp. The influence of cellulose protectors was similar to the yield of pulps from both sapwood and heartwood. The effective protectors among seven additives were KI, $MgSO_4$ and AQ, for which the yields of screened pulp was as high as that of kraft pulp. Considering the additive level of protector, the AQ was the most effective in improving the yield and the quality of pulp. 3. When the amount of AQ increased in soda cooking, the yield and the quality of the pulp increased but rejects in total yield increased with decreasing the amount of active alkali from 19 to 15 percent. The best proportion of the AQ seemed to be 0.5 percent at 17 percent active alkali in anthraquinone-soda pulping. 4. On the bleaching of the AQ-soda pulp at 30 percent consistency with oxygen of atomospheric pressure in the first stage of the ODED sequence, the more caustic soda added, the brighter bleached pulp was obtained, but more lignin-selective bleaching reagent in proportion to the oxygen was necessary to maintain the increased yield with the addition of anthraquinone. 5. In conclusion, the suitable pulping condition for larchwood to improve the yield and quality of the chemical pulp to the level for kraft pulp from conventional process seemed to be. A) the selection of young larchwood to prevent decreasing in yield and quality due to the accumulation extractives in old wood, B) the application of 0.5 percent anthraquinone to the conventional soda cooking of 18 percent active alkali, and followed, C) the bleaching of oxygen in atmospheric pressure on high consistency (30%) with 0.1 percent magnesium oxide in the first stage of the ODED sequence to reduce the content of chlorine compounds in effluent.

  • PDF