• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.2032-2041
• /
• 2000

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2498-2508
• /
• 1993

$Al/SiC/Al_{2}O_{3}$ hybrid composites are fabricated by squeeze infiltration method. From the misconstructive of $Al/SiC/Al_{2}O_{3}$ hybrid composites fabricated by squeeze infiltration method, uniform distribution of reinforcements and good bondings are found. Hardness value of $Al/SiC/Al_{2}O_{3}$ hybrid composites increases linearly with the volume fraction of reinforcement because SiC whisker and $Al_{2}$O$_{3}$ fiber have an outstanding hardness. Optimal aging conditions are obtained by examining the hardness of $Al/SiC/Al_{2}O_{3}$ hybrid composites with different aging time. Tensile properties such as Young's modulus and ultimate tensile strength are improved up to 30% and 40% by the addition of reinforcements, respectively. Failure mode of $Al/SiC/Al_{2}O_{3}$ hybrid composites is ductile on microstructural level. Through the abrasive wear test and wear surface analysis, wear behaviour and mechanism of 6061 aluminum and $Al/SiC/Al_{2}O_{3}$ hybrid composites are characterized under various testing conditions. The addition of SiC whisker to $Al/SiC/Al_{2}O_{3}$ composites gives rise to improvement of the wear resistance. The wear resistance of $Al/SiC/Al_{2}O_{3}$ hybrid composites is superior to that of Al/SiC composites. The wear mechanism of aluminum alloy is mainly abrasive wear at low speed range and adhesive and melt wear at high speed range. In contrast, that of $Al/SiC/Al_{2}O_{3}$ hybrid composites is abrasive wear at all speed range, but severe wear when counter material is stainless steel. As the testing temperature increases, wear loss of aluminum alloy decreases because the matrix is getting more ductile, but that of $Al/SiC/Al_{2}O_{3}$ hybrid composites is hardly varied. Oil lubricant is more effective to reduce the wear loss of aluminum alloy and $Al/SiC/Al_{2}O_{3}$ hybrid composites at high speed range.

• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.56-60
• /
• 2015

Discontinuous, polycrystalline $Al_2O_3$-dispersed TZP fibers were prepared by the centrifugal spinning of a colloidal $ZrO_2$ sol containing Y and Al nitrates and poly(vinyl alcohol). Factors affecting the rheological properties of the sols, such as sol concentrations, aging, and the amounts and types of additives, were investigated by measuring the shear viscosities. The flow characteristics of the sols were studied in relation to the spinnability by measuring the viscosity with respect to the shear rate. The spinnability was obtained through the addition of a polymer which increases the viscosity to a range of optimum viscosity values for spinning. Aging the sols containing the additives did not noticeably change the sol viscosities at room temperature up to 30 days. The flow behavior of the spinnable sols progressively changed from nearly Newtonian to pseudoplastic with an increase in the sol concentration.

• 한국세라믹학회지
• /
• 제44권7호
• /
• pp.349-353
• /
• 2007

2D SiC fiber-SiC (SiC/SiC) composites were fabricated via slurry infiltration and a stacking process. The effects of the additive composition and content in SiC slurries and the effect of the sintering time on the sintered density and strength of SiC/SiC composites were investigated. A slurry containing $Al_2O_3-Y_2O_3-MgO$ (AYM) additives led to a higher strength compared to a slurry containing $Al_2O_3-Y_2O_3-CaO$ (AYC) additives. The sintered density increased as the sintering time increased and showed a maximum (>98%) at 4 h. In contrast, the flexural strength increased as the sintering time increased and showed a maximum (615 MPa) at 6 h. The relative density and flexural strength increased as the additive content increased.

• 한국결정성장학회지
• /
• 제15권6호
• /
• pp.229-233
• /
• 2005

Novel process was tried to obtain micro-porous ceramic body containing continuous pore channel. $MgAl_2O_4/MgO$ eutectic fibers and rods have been grown successfully by the micro-pulling-down method, and the microstructures and optical characterizations of grown crystals were performed. $MgAl_2O_4/MgO$ eutectic fibers of $0.3{\sim}1mm$ in diameter and about 500 mm in length, and the rods having 5 mm in diameter with approximately 60 mm in length have been grown with the $6{\sim}120mm/hr$ of growth speed. The eutectic fibers showed homogeneous microstructure in which MgO fiber aligned to the growth direction in the $MgAl_2O_4$ (spinel) matrix. The grown crystals looked semitransparency under naked eyes. Optical and orientational characterizations were performed. The second phase of MgO (periclase) was easily removed by selective etching with hydrochloric acid, and then porous bodies were obtained.

• 보존과학연구
• /
• 통권32호
• /
• pp.75-87
• /
• 2011

유물을 처리하기 전에 제작 시기, 기법, 재질 등의 정보를 수집하는 것은 보존처리 방법 결정에 중요하다. 대상유물인 팔사품도는 이순신 장군이 명나라 신종황제로부터 하사받은 팔사품을 그림으로 그린 것으로 바탕재료인 직물에 안료를 이용하여 채색되어 있었으며, 뒷면에는 1장의 종이로 배접이 되어있는 상태였다. 제작연대나 작가 등 유물에 대한 정보가 남아있지 않았기 때문에 유물의 재질 분석을 통해서 제작 연대를 추정해보고, 처리 및 보관 방향을 결정하고자 하였다. 팔사품도의 바탕재료로 사용된 직물의 분석 결과 리본 꼬임과 강낭콩 모양의 단면이 관찰되어 면으로 확인되었다. 배접지에 사용된 종이를 분석한 결과 C 염색액에 의해 오렌지색으로 염색되었으며, 섬유장이 짧고 섬유 측면에 가도관이 관찰되어 침엽수 펄프로 제조된 종이로 추정된다. 또한 채색안료를 분석한 결과 자황(Orpiment, $As_2S_3$), 연단(Minium, $Pb_3O_4$), 석간주(Hematite, $Fe_2O_3$), 화록청[Emerald green, $C_2H_3As_3Cu_2O_8$], 군청(Ultramarine, [$2(Na_2O{\cdot}Al_2O_3{\cdot}2SiO_2){\cdot}Na_2S_2$]), 활석[Talc, $Mg_3Si_4O_{10}\;(OH)_2$] 및 황산바륨($BaSO_4$), 황동(Brass)을 사용한 것으로 추정된다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2002년도 추계총회 및 연구발표회 초록집
• /
• pp.118.1-118
• /
• 2002

• 한국주조공학회지
• /
• 제13권3호
• /
• pp.248-258
• /
• 1993

A semi-solid alloy in which solid and liquid phase are co-existing is obtained by stirring of A17075 molten metal. A semi-solid alloy is dependent on the corresponding temperature within the solid-liquid range, and the process parameters should be controlled accurately to obtain the homogeneous semisolid alloy. The fabrication possibility of fiber-reinforced aluminum alloy containing $Al_2O_3$ short fibers with vigorous agitation of short fibers were obtained by control of stirring time, solid fraction and impeller speed in extrusion billet fabrication processes. The microstructure to extrusion billet fabricated by low pressure casting was investigated for fiber dispersion state. The relationship between the extrustion force and velocity at hot extrustion, the flow strain and extrusion ratio were theoretically described. The surface defects with lubricants and without lubricant after hot extrusion were investigated. The composites materials after hot extrusion were measured by vickers hardness with extrusion ratio. It has become clear that the secondary working such as hot extrusion was very useful to obtained improved the mechanical properties of metal matrix composites.

• 센서학회지
• /
• 제17권4호
• /
• pp.281-288
• /
• 2008

Polyacrylonitrile(PAN)/metal oxide(MO) nanocomposite mats with a thickness of 0.12 mm were electrospun by adding 0 to 10 wt% of MO nanoparticles ($Fe_2O_3$, ZnO, $SnO_2$, $Sb_2O_3-SnO_2$) into PAN. Pt electrode was patterned on $Al_2O_3$ substrate by DC sputtering and then the PAN(/MO) mats on the Pt patterned $Al_2O_3$ were electrically wired to investigate the $CO_2$ gas sensing properties. As the MO content rose, the fiber diameter decreased due to the presence of lumps caused by the presence of MOs in the fiber. The PAN/2% ZnO mat revealed a faster response time of 93 s and a relatively short recovery of 54 s with a ${\Delta}R$ of 0.031 M${\Omega}$ at a $CO_2$ concentration of 200 ppm. The difference in sensitivity was not observed significantly for the PAN/MO fiber mats in the $CO_2$ concentration range of 100 to 500 ppm. It can be concluded that an appropriate amount of MO nanoparticles in the PAN backbone leads to improvement of the $CO_2$ gas sensing properties.

• 청정기술
• /
• 제24권4호
• /
• pp.280-286
• /
• 2018

본 연구에서는 금속산화물 2종, $TiO_2$ 분말과 $Al_2O_3$ 분말을 이용하여 건식 조건에서의 기상 VOCs 흡착 성능을 평가하였으며, BET분석과 암모니아 in-situ FT-IR 분석을 통해 비표면적, 표면 산점을 분석하고 성능과의 상관성을 평가하였다. 그 결과 $TiO_2$ 분말, $Al_2O_3$ 분말은 각각 $317.6m^2\;g^{-1}$, $64m^2\;g^{-1}$의 비표면적을 갖으며, $TiO_2$ 분말의 경우 표면에 다수의 산점이 관찰되었다. 두 금속 산화물 분말을 이용하여 기상 VOCs 흡착 성능을 평가한 결과, 비표면적이 크고 다수의 산점을 보유한 $TiO_2$ 분말이 비교적 우수한 흡착 성능을 나타내었다. 특히 비표면적이 흡착성능에 직접적인 영향을 미치는 것으로 판단되며, 산점에 의한 영향에 대해서는 추가적인 연구가 요구된다. 우수한 흡착 성능을 나타낸 $TiO_2$를 기반으로 honeycomb, hollow fiber, disc의 성형체로 제조 한 결과, 분말보다 흡착 성능은 낮았으나 적용성 측면에서 유리하며 제조공정의 특성상 우수한 열적 내구성을 갖는 polymeric disc 흡착제의 경우, 수회의 고온 탈착공정 후에도 흡착 성능을 안정적으로 유지함을 확인하였다.