• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.127-132
• /
• 2001

An experimental study on penetration integrity of the reactor vessel has been performed under external vessel cooling during a core melt accident. In this study a series of experiments are performed for the verification of the effects of coolant in the annulus between the ICI(In-Core Instrumentation) nozzle and the thimble tube and also the effects of external vessel cooling on the integrity of the penetration using the test section including only one penetration and $Al_{2}O_{3}$ melt as a corium simulant. The experimental results have shown that penetration is more damaged in the case of no external vessel cooling compared with the case of external vessel cooling. It is preliminarily concluded that the external vessel cooling is very effective measure for the improvement of the penetration integrity. Also it is confirmed from the experimental results that the coolant in the annulus reduces the melt penetration distance through the annulus and enhance the integrity of the reactor vessel penetration in the end.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.133-133
• /
• 1998

In the thin film alloy formation of the transition metals ion-beam-mixing technique forms a metastable structure which cannot be found in the arc-melted metal alloys. Sppecifically it is well known that the studies about the electronic structure of ion-beam-mixed alloys pprovide the useful information in understanding the metastable structures in the metal alloy. We studied the electronic change in the ion-beam-mixed ppt-Ct alloys by XppS and XANES. These analysis tools pprovide us information about the charge transfer in the valence band of intermetallic bonding. The multi-layered films were depposited on the SiO2 substrate by the sequential electron beam evapporation at a ppressure of less than 5$\times$10-7 Torr. These compprise of 4 ppairs of ppt and Cu layers where thicknesses of each layer were varied in order to change the alloy compposition. Ion-beam-mixing pprocess was carried out with 80 keV Ae+ ions with a dose of $1.5\times$ 1016 Ar+/cm2 at room tempperature. The core and valence level energy shift in these system were investigated by x-ray pphotoelectron sppectroscoppy(XppS) pphotoelectrons were excited by monochromatized Al K ａ(1486.6 eV) The ppass energy of the hemisppherical analyzer was 23.5 eV. Core-level binding energies were calibrated with the Fermi level edge. ppt L3-edge and Cu K-edge XANES sppectra were measured with the flourescence mode detector at the 3C1 beam line of the ppLS (ppohang light source). By using the change of White line(WL) area of the each metal sites and the core level shift we can obtain the information about the electrons pparticippating in the intermetallic bonding of the ion-beam-mixed alloys.

• Journal of Electrochemical Science and Technology
• /
• 제7권2호
• /
• pp.179-184
• /
• 2016

The interface between the surface of a cathode material and the electrolyte gives rise to surface reactions such as solid electrolyte interface (SEI) and chemical side reactions. These reactions lead to increased surface resistance and charge transfer resistance. It is consequently necessary to improve the electrochemical characteristics by suppressing these reactions. In order to suppress unnecessary surface reactions, we coated cathode material using polypropylene (PP). The PP coating layer effectively reduced the SEI film that is generated after a 4.3 V initial charging process. By mitigating the formation of the SEI film, the PP-coated Li[(Ni_0.6Co_0.1Mn_0.3)_0.36(Ni_0.80Co_0.15Al0.05)_0.64)]O₂(NCS) electrode provided enhanced transport of Li⁺ ions due to reduced SEI resistance (R_SEI) and charge transfer resistance (R_ct). The initial charge and discharge efficiency of the PP-coated NCS electrode was 96.2 % at a current density of 17 mA/g in a voltage range of 3.0 ~ 4.3 V, whereas the efficiency of the NCS electrode was only 94.7 %. The presence of the protective PP layer on the cathode improved the thermal stability by reducing the generated heat, and this was confirmed via DSC analysis by an increased exothermic peak.

• Nuclear Engineering and Technology
• /
• 제29권4호
• /
• pp.336-347
• /
• 1997

During postulated severe accidents in Light water Reactors, molten corium which was ejected from the reactor vessel bottom, may erode the concrete basemat of the containment and there by threaten the containment integrity. This study experimentally examines the molten core-concrete interaction (MCC) using 20kg of thermite melt (Fe + $Al_2$O$_3$) and the concrete, used in Yonggwang Nuclear Power Plant Units 3 and 4 (YGN 3 & 4) in Korea. The measured data are the downward heat fluxes, concrete erosion rate, gases and particle generation rates during MCCI. Transient results ore compared with those of TURCIT experiment conducted by SNL in USA. The peak downward heat flux to the concrete was measured to be about 2.1㎿/$m^2$. The initial concrete erosion rate was 175cm per hour, decreasing to 30cm per hour. It was shown from the post-test that the erosion was progressed downward up to 18mm in the concrete slug.

• Bulletin of the Korean Chemical Society
• /
• 제21권7호
• /
• pp.720-726
• /
• 2000

The analytic gradient method for the equation-of-motion coupled-cluster singles and doubles (EOM-CCSD) energy has been extended to employ a reduced molecular orbital (MO) space. Not only the innermost core MOs but also some of the outermost virtua l MOs can be dropped in the reduced MO space, and a substantial amount of computation time can be reduced without deteriorating the results. In order to study the magnitudes and trends of the effects of the dropped MOs, the geometries and vibrational properties of the ground and excited states of BF, CO, CN, N2, AlCl, SiS, P2, BCl, AIF, CS, SiO, PN and GeSe are calculated with different sizes of molecular orbital space. The 6-31 G* and the aug-cc-pVTZ basis sets are employed for all molecules except GeSc for which the 6-311 G* and the TZV+f basis sets are used. It is shown that the magnitudes of the drop-MO effects are about $0.005\AA$ in bond lengths and about 1% on harmonic frequencies and IR intensities provided that the dropped MOs correspond to (1s), (1s,2s,2p), an (1s,2s,2p,3s,3p) atomic orbitals of the first, the second, and the third row atoms, respectively. The geometries and vibrational properties of the first and the second excited states of HCN and HNC are calculated by using a drastically reduced virtual MO space as well as with the well defined frozen core MO space. The results suggest the possibility of using a very smalI MO space for qualitative study of valence excited states.

• 전기전자학회논문지
• /
• 제11권4호
• /
• pp.145-151
• /
• 2007

본 논문에서는 저손실 ${Al_2}{O_3}$ 코아 물질을 이용한 초소형 고성능 솔레노이드 형태 RF 칩 인덕터에 대하여 연구하였다. 본 논문에서 제작된 칩 인덕터의 크기는 $0.86{\times}0.46{\times}0.45m^3$, $1.5{\times}1.0{\times}0.7m^3$, $2.1{\times}1.5{\times}1.0m^3$와 $2.4{\times}2.0{\times}1.4m^3$으로 하였고, 코일은 $27{\sim}40{\mu}m$의 구리선을 사용하였다. 개발된 인덕터의 인덕턴스, 품질계수, 임피던스의 고주파수 특성은 HP16193A test fixture가 장착된 RF Impedance/Material Analyzer(HP4291B)를 이용하여 측정되었다. 7회 권선된 인덕터들은 13${\sim}$100nH의 인덕턴스와 6.4${\sim}$1.1GHz의 자기공진주파수를 가진다. 인덕터들의 자기공진주파수는 인덕턴스가 증가함에 따라 감소하고, 인덕터들의 직접쓰기는 300MHz${\sim}$1.3GHz의 주파수 범위에서 50${\sim}$80을 가진다. 본 연구에서는 높은 인덕턴스와 높은 직접쓰기를 갖는 초소형 솔레노이드 형태 RF 칩 인덕터가 성공적으로 제작되었다.

• Bulletin of the Korean Chemical Society
• /
• 제28권3호
• /
• pp.443-446
• /
• 2007

The novel blue light emitting material, 9,10-bis(3',5'-diphenylphenyl)anthracene (BDA) was synthesized by Suzuki coupling reaction and characterized by the measurements of 1H NMR, 13C NMR and FT-IR. The new anthracene derivative, which contains anthracene as a main core unit and 3',5'-diphenylphenyl group derivative as wings, has high fluorescence yield, good thermal stability, and high glass transition temperature at 188 oC. With the newly non-doped blue emitting material in the multilayer device structure, it was possible to achieve the current efficiency of 3.0 cd/A. The EL spectrum of the ITO/CuPc/α-NPD/BDA/Alq3/LiF/Al device showed a maximum wavelength (λmax) at 440 nm. The emitting color of device showed the blue emission (x,y) = (0.18,0.19) at 10 mA/cm2 in CIE (Commission Internationale de l'Eclairage) chromaticity coordinates.

• 대한치과보철학회지
• /
• 제31권3호
• /
• pp.317-349
• /
• 1993

This study investigated the effect of filler particle size and weight% on mechanical properties of dental core porcelain. In alumina, variation in particle size and weight% and in zirconia, variation in weight%, all specimens were tested three-point bending strength, transmittance, thermal expansion coefficient, porosity and shrinkage and observed with SEM and analysed with X-ray diffractometer. In order to develop shrink-free porcelain, after firing alumina only, glass wasinfiltrated. And aluminum was added to alumina with the expanding character of aluminum oxidize into alumina, and was followed by second firing of glass infiltration procedure. Then mechanical properties were observed. The results of this study were obtained as follows. 1. The bending strength of zirconia was higher than that of alumina, and $5{\mu}m$ alumina had highest strength in variation of particle size of alumina. Except for $5{\mu}m$ alumina, increased with weight%, bending strength increased up to 80% and decreased at 90%. In case of glass infiltration, bending strength was slight higher than 80% and 90% of $5{\mu}m$ alumina. 2. Transmittance increased with increase of shrinkage, decrease of porosity, and with increase of filler size and had no direct correlation with weight%. 3. Thermal expansion coefficient of alumina group was $7.42\sim8.64\times10^{-6}/^{\circ}C$ and that of zirconia group was $9.83\sim12.11\times10^{-6}/^{\circ}C$ and the latter was higher than the former. 4. In x-ray diffraction analysis, alumina group and zirconia group increased $Al_2O_3$ peak and $t-ZrO_2$ peak with increase of weight%. The second phase(cristobalite peak) was observed in zirconia 40% group. 5. Porosity of zirconia was lower than that of alumina and $5{\mu}m$ alumina group had many pores with SEM. In case of low filler content, fracture occurred in glass and high filler content, in glass and filler. In case of aluminum addition to alumina, small oxidised aluminum was observed. 6. Zirconia group had high shrinkage than alumina group, and mixed group of alumina group had high shrinkage. In case of glass infiltration, shrinkage decreased and aluminum addition to alumina group was almost shrink-free.

• 암석학회지
• /
• 제9권2호
• /
• pp.99-118
• /
• 2000

황강리 지역내 앰피볼라이트에 나타나는 대상 각섬석류의 Na(A), K. Na(M4), Al(IV) 그리고 Al(VI)+Fe3++Ti+Cr의 함량변화를 치화작용의 관점에서 보면 쳐마카이트 치환과 에데나이트 치환 그리고 글로코페인 치환의 정도는 핵부위의 양기석질이 주변부로 감에 따라 감섬석으로 보이는 가장 높은 변성도의 세 시료(M29-2, M26-2, M78)에 존재하는 각섬석들의 치환성분 함량은 더 낮은 변성도의 주연부에서 더 높다. 또한 투휘석을 포함하거나 녹갈색의 감섬석을 보이는 가장 높은 변성도의 세 시료(M29-2, M76-2, M78)에 존재하는 각섬석들의 치환성분 함량은 더 낮은 변성도의 주연부 각섬석보다는 낮고 양기석 보다는 높은 것으로 나타나고 있어 치환작용의 정도가 전체 각섬석류중에서 중간영역에 해당되고 있다. 대상 각섬석류의 성인데 대한 고찰을 해보면 첫째로 두 시료 R120-1와 R210-9가 서로 동일하게 각섬석류의 핵은 양기석질 각섬석이고 주연부는 마그네시안 해스팅사이트에 해당되는데 사장석은 각각 알바이트(R102-1)와 라브라도라이트(R210-9)의 큰 성분격차를 보여주고 있다. 알바이트와 라브라도라이트가 한번의 변성작용으로 동시에 생성되기가 어렵기 때문에 대상 각섬석류는 불혼합 구간(Miscibility gap)이 아닌 다변성작용의 결과로 형성된 것으로 추정된다. 둘째로 양기석과 각섬석간의 접촉면이 광학적으로 뚜렷한 경우와 점이적일 경우 모두 화강암체와 떨어진 거리에 상관없이 본암에 형성되어 있다. 두 광물이 뚜렷한 접촉면을 보여주는 시료의(R210-9, M128, M130) 경우 사장석이 저변성도와 중변성도에서 생성되는 성분을 함께 보여주고 있다. 이런 다양한 성분의 사장석은 불혼합 구간이 형성되는 변성도보다 더 높은 변성도의 변성작용이 중첩되어 있음을 지시하기 때문에 대상 각섬석류가 다변성작용에 의해 성장한 것을 의미한 준다. 또한 광물간에 점이적인 접촉면을 갖는 경우도 이 조직이 주로 화강암체 주변에서 산출된다는 사실과 변성도의 고찰 등을 통해 다변성작용의 영향에 기인한 것으로 생각된다. 대상 각섬석류의 성분변화를 변성작용의 압력형과 연관지어보면 핵부위의 양기석들은 중압형의 변성작용에 의해 성장한 것으로 볼 수 있고 주연부의 각섬석들은 저압형과 유사한 변성작용으로 인해 형성된 것임을 알 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.785-788
• /
• 2005

In this study, micro-scale, high-performance, solenoid-type RF chip inductors were investigated. The size of the RF chip inductors fabricated in this work was $1.0{\times}0.5{\times}0.5mm^3$ The material and shape of the core were 96% $Al_2O_3$ and I-type. The material and number of turn of coil were copper (Cu) and 6. The diameter ($40{\mu}m$) of coil and length (0.35mm) of solenoid were determined by a Maxwell three-dimensional field simulator to maximize the performance of the inductors. High frequency characteristics of the inductance (L) and quality-factor (Q) of developed inductors were measured using an RF Impedance/Material Analyzer (HP4291B with HP16193A test fixture). The inductors developed have inductances of 10.8nH and quality factors of 25.2 at 250MHz, and show results comparable to those measured for the inductors prepared by CoilCraftTm that is one of the best chip inductor company in the world. The simulated data predicted the high-frequency data of the Land Q of the inductors developed well.