• 제목/요약/키워드: $AlCl_3$

검색결과 717건 처리시간 0.024초

DRUM impactor를 이용한 대기 입자상 물질 중 원소성분의 입경분포 특성 : 제주도 고산지역의 2002년 봄철 (3.29-5.30) 측정 연구 (Size Distributions of Trace Elements in Airborn Particulates Collected using Drum impactor at Gosan, Jeju Island : Measurements in Springtime 2002)

  • 한진석;문광주;류성윤;안준영;공부주;홍유덕;김영준
    • 한국대기환경학회지
    • /
    • 제20권4호
    • /
    • pp.555-569
    • /
    • 2004
  • Size -segregated measurements of aerosol composition using 8-stage DRUM impactor are used to determine the transport of natural and anthropogenic aerosols at Gosan site from 29 March to 30 May in 2002. Separation of ambient aerosols by DRUM impactor offers many Advantages over other standard filtration techniques. Some of the most important advantages are the ability to segregate into details by particle tire, to better preserve chemical integrity since the air stream doesn't pars through the deposit, to collect samples as a function of time, and to have a wide variety of impaction surfaces available to match analytical needs. Although the transport of Yellow sand is a well-known phenomenon in springtime, the result of measurement shows that not only soil dust but also anthropogenic aerosols, including sulfur, enriched trace metals such as Pb, Ni, Zn. Cu, Cr, As, Se, Br, are transported to Gosan in springtime. This study combines the size- and time-resolved aerosol composition measurements with isentropic, backward air-mass trajectories in order to identify some potential source regions of anthropogenic aerosols. As a result, during the NYS period, the average concentration of PM$_{10}$ was 46$\mu\textrm{g}$/㎥, Si, Al. S, Fe, Cl, K, Ca were higher than 1,000 ng/㎥ and Ti was about 100 ng/㎥. The concentrations of Zn, Mn, Cu. Pb, Br, Rb, V, Cr, Ni. At, Se ranged between 1 and 70 ng/㎥. More than 50% typical soil elements, tuck as Al, Si, Fe, Cd. Ti, Cr, Cu, Br. were distributed in a coarse particle range(5.0-12${\mu}{\textrm}{m}$). In other hand, anthropogenic pollutants, luck as S, N, Vi, were mainly distributed in a fine particle range (0.09-0.56${\mu}{\textrm}{m}$). During the YS period, PM$_{10}$ increased about 8 times than NYS period, and main soil elements, such as Al, Si, S, K, V, Mn, Fe also doubled in coarse particle range (1.15-12${\mu}{\textrm}{m}$). But Zn, As, Pb, Cu and Se, which distributed in the time aerosols (0.09-0.56${\mu}{\textrm}{m}$), were on the same level with or decreased than NYS period. Finally. except the YS Period, coarse particles (2.5-12${\mu}{\textrm}{m}$) are inferred to be influenced by soil, coal combustion, waste incineration, ferrous and nonferrous sources through similar pathways with Yellow Sand. But fine particles have different sources, such as coal combustion, gasoline vehicle, biomass burning, oil or coal combustion, nonferrous and ferrous metal sources, which are transported from China, Korea peninsula and local sources.ces.

국내 폐금속광산 주변 잔류광미의 중금속 오염특성 (Characteristics of Heavy Metal Contamination in Residual Mine Tailings Near Abandoned Metalliferous Mines in Korea)

  • 정구복;김원일;이종식;이재생;박찬원;고문환
    • 한국환경농학회지
    • /
    • 제24권3호
    • /
    • pp.222-231
    • /
    • 2005
  • 광산주변의 광해대책 없이 방치된 대부분의 잔류광미는 광산지역의 하류 농경지뿐만 아니라 재배 작물의 중금속 오염의 주원인이 될 수 있다. 본 연구는 폐금속광산의 중금속 오염 특성을 평가하기 위하여 국내 25개 광산 주변에서 채취한 광미를 대상으로 수용성, 산가용성 및 전함량 중금속을 분석 검토하였다. 광미 중 수용성 무기이온들의 함량은 ${SO_4}^{2-}>Ca^{2+}>Mn^{2+},\;Na^+,\;Al^{3+}>Mg^{2+},\;Fe^{3+}>Cl^-$ 순으로 높았으며, 특히 pH, EC, ${SO_4}^{2-}$$Ca^{2+}$ 함량은 광산별로 큰 편차를 보였다. 광미중의 중금속 전함량은 Cd 31.8, Cu 708, Pb 4,961, Zn 2,275 및 As 3,235 mg/kg이었고, 중금속 중 Cd, Zn 및 As는 우리나라 토양환경보전법의 토양오염대책 기준을 초과하였다. 광미 중 전함량에 대한 수용성 중금속 비율은 Cd > Zn > Cu > Pb > As 순으로 높게 나타나 토양 환경내에서 이동성이 높은 순위와 일치하였다. 또한 0.1M-HCl 산가용성 침출비율은 각각 Cd 17.4, Cu 10.2, Pb 6.5, Zn 6.8 및 As 11.4%(1M-HCl 추출성)이었고, 광미 중 중금속 전함량에 대한 수용성 함량비율은 화학성분 조성과 관련성이 큰 것을 알 수 있었다. 광미중의 중금속 부화계수(EF)는 As > Pb > Cd > Cu > Zn 순이었고, 오염지순(PI)는 Au-Ag 광산이 다른 광산보다 높은 것으로 나타났다. 이러한 광산 주변 광미의 중금속 부화계수와 오염지수를 근거로 볼 때 심각한 수준으로 중금속이 농집되어 있어 폐광산 주변의 주요 오염원은 광미를 포함한 광산폐기물로 판단할 수 있었다. 따라서 폐광산 주변에서 중금속을 다량 함유된 광미의 유실 및 강우에 의한 유출은 하부 수계 및 농경지에 심각한 문제를 야기 시키며,특히 산성 황화물을 함유하는 광산폐수는 산성배수를 일으켜 중금속 용출 부화를 가중시킬 수 있어 이에 대한 대책이 강구되어야 할 것이다.

장기간 (1990 ~ 2012) 측정자료를 이용한 용인-수원지역에서의 PM2.5의 화학적 특성연구 및 헤이즈와 황사 현상 시 화학성분별 질량분율표의 개발 (Study on Chemical Characterization of PM2.5 based on Long-term Database (1990 ~ 2012) and Development of Chemical Species Profiles During Haze Days and Asian Dust Days in Yongin-Suwon Area)

  • 임효지;이태정;김동술
    • 한국대기환경학회지
    • /
    • 제31권3호
    • /
    • pp.223-238
    • /
    • 2015
  • The $PM_{2.1}$ was collected by LVCI (low volume cascade impactor) during Group-A Period (September 1990 to December 2012) and the $PM_{2.5}$ was collected by HVAS (high volume air sampler) during Group-B Period (September 2009 to April 2012) at Kyung Hee University, Global Campus located on the boarder of Yongin and Suwon. The 8 water-soluble ions ($Na^+$, $NH_4{^+}$, $K^+$, $Mg^{2+}$, $Ca^{2+}$, $Cl^-$, $ NO_3{^-}$, and $SO_4{^{2-}}$) were analyzed by IC, and the 14 inorganic elements (Al, Mn, Si, Fe, Cu, Pb, Cr, Ni, V, Cd, Ba, Zn, Ti, Ag) were analyzed by XRF and ICP-AES after performing proper pre-treatments of each sample filter. The average total mass fractions of $SO_4{^{2-}}$, $NO_3{^-}$, and $NH_4{^+}$+ to $PM_{2.5}$ samples during Group-B Period were 0.39 in normal days, 0.44 in haze days, and 0.27 in Asian dust days, respectively; however, the average total mass fractions of Al, Fe, and Si to $PM_{2.5}$ mass were 0.043 in normal days, 0.021 in haze days, and 0.036 in Asian dust days, respectively. Especially the concentration of Pb was significantly decreased during Group-B Period rather than during Group-A Period, while Cr and Ni was increased during Group-B Period. In this study, we intensively compared the annual and seasonal patterns of major chemical species among normal days, haze days, and Asian dust days. Further we developed mass fraction profiles by collecting episode cases of haze days and Asian dust days, which were consisting of 22 chemical species. Those profiles are considered to be useful when applying various receptor models and establishing air quality management plans near future.

제주도 고산지역 TSP, PM2.5 대기에어로졸의 조성 및 오염 특성 (Composition and pollution characteristics of TSP, PM2.5 atmospheric aerosols at Gosan site, Jeju Island)

  • 이순봉;강창희;정덕상;고희정;김행범;오용수;강혜림
    • 분석과학
    • /
    • 제23권4호
    • /
    • pp.371-382
    • /
    • 2010
  • 제주도 고산지역에서 TSP (total suspended particulate), PM2.5 (particulate matter, below $2.5\;{\mu}m$ particle size) 대기에어로졸을 채취, 분석하여 에어로졸의 조성과 오염 특성을 조사하였다. 고산지역 대기에어로졸에서 nss(non-sea salt)-$SO_4^{2-}$$NH_4^+$은 다른 국내 청정지역 및 도시지역에 비해 높은 조성비를보이고 $NO_3^-$는 상대적으로 낮은 조성비를 나타내었다. 에어로졸 성분의 입경별 분포를 비교해 본 결과, 인위적 기원의 nss-$SO_4^{2-}$, $NO3_^-$, $NH_4^+$ 성분들은 대체적으로 미세입자에, 토양기원의 nss-$Ca^{2+}$과 해염기원의 $Na^+$, $Cl^-$, $Mg^{2+}$은 상대적으로 조대입자에 많이 분포하고 있는 것으로 확인되었다. 계절별로는 봄철에 nss-$Ca^{2+}$, Al, Fe, Ca, $NO_3^-$ 성분의 농도가 크게 상승하고, nss-$SO_4^{2-}$은 여름과 봄철에 높은 농도를 나타내었다. 인자분석 결과, 에어로졸은 대체적으로 인위적 발생원의 영향을 많이 받고, 다음으로 해양 및 토양 영향을 많이 받았다. 또한 역궤적 분석법으로 에어로졸 성분의 유입경로를 조사해 본 결과, nss-$SO_4^{2-}$, $NO_3^-$, Pb, nss-$Ca^{2+}$ 성분들은 대체적으로 기류가 중국대륙으로부터 제주지역으로 이동할 때 훨씬 더 높은 농도를 나타낸 반면, 북태평양에서 제주지역으로 이동할 때 상대적으로 낮은 농도를 나타내었다.

고정배출원의 먼지 크기별 (PM, PM10, PM2.5) 배출 특성 연구 (The Characterization of PM, PM10, and PM2.5 from Stationary Sources)

  • 김종호;황인조
    • 한국대기환경학회지
    • /
    • 제32권6호
    • /
    • pp.603-612
    • /
    • 2016
  • The objective of this study was to estimate the emission characteristics for PM, $PM_{10}$, and $PM_{2.5}$ in the various stationary sources. The particulate matters collected in the various stationary sources such as power plants (Coal and B-C oil), incinerators(municipal and industrial waste), and glass furnaces. The PM and $PM_{10}$, PM and $PM_{2.5}$, $PM_{10}$ and $PM_{2.5}$ samples were collected using the cyclone type $PM_{10}$, $PM_{2.5}$ samplers and 30 species(19 inorganic species, 9 ionic species, OC and EC) were analyzed by ICP, IC, and TOR/IMPROVE methods. The mass concentrations of PM, $PM_{10}$, $PM_{2.5}$ from nine stationary sources ranged $0.63{\sim}9.58mg/Sm^3$, $0.26{\sim}7.47mg/Sm^3$ and $0.13{\sim}6.34mg/Sm^3$, respectively. The level of $PM_{10}$, $PM_{2.5}$ portion in PM calculated 0.63~0.99, 0.38~0.94, respectively. In the case of emission trend for species, power plant showed high concentrations for Al, Mg, Na, Si, V and $SO_4{^{2-}}$, respectively. Also, Ca, Fe, K, Si, $Cl^-$, and $K^+$ showed high in incinerator. In the case of glass furnace, Na, Pb, K, Si, $Na^+$ and $SO_4{^{2-}}$ represented high concentrations. Power plant showed higher EC/OC concentrations than other sampling sites. These results suggest the possible role for complement establishment process of emission inventory and emission management for PM.

익산지역 가을철 대기 중 호흡성 및 흡입성 먼지입자의 화학조성 (Chemical Composition of Respirable PM2.5 and Inhalable PM10 in Iksan City during Fall, 2004)

  • 강공언
    • 한국환경보건학회지
    • /
    • 제36권1호
    • /
    • pp.61-71
    • /
    • 2010
  • Intensive measurements of airborne respirable $PM_{2.5}$ and inhalable $PM_{2.5}$ were conducted in the downtown area of Iksan city. The $PM_{2.5}$ and $PM_{2.5}$ samples were collected twice a day in the Iksan city of Korea from October 17 to November 1, 2004. The purpose of the study was to determine the inorganic water-soluble components and trace elements of $PM_{2.5}$ and $PM_{2.5}$ in the atmospheric environment and estimate the contribution rate of major chemical components from a mass balance of all measured particulate species. The chemical analysis for PM samples was conducted for water-soluble inorganic ions using ion chromatography and trace elements using PIXE analysis. The mean concentrations of respirable $PM_{2.5}$ and inhalable $PM_{2.5}$ were $51.4{\pm}29.7$ and $79.5{\pm}39.6\;{\mu}g/m^3$, respectively, and the ratio was 0.62. The ion species of $NO_3$, $SO_4^2$, and $NH_4^+$ were abundant in both $PM_{2.5}$ and $PM_{2.5}$. These components predominated in respirable $PM_{2.5}$ fraction, while $Na^+$, $Mg^{2+}$, $Ca^{2+}$ mostly existed in coarse particle mode. Elemental components of S, Cl, K, and Si were abundant in both $PM_{2.5}$ and $PM_{2.5}$. These elements, except for Si, were considered to be emitted from anthropogenic sources, while Si, Al, Fe, Ca existed mainly in coarse particle mode and were considered to be emitted from crustal materials. The averaged mass balance analysis showed that ammonium nitrate, ammonium sulfate, crustal component, and other trace elements were composed of 18.4%, 13.2%, 4.8%, 3.5% for PM2.5 and 17.0%, 11.6%, 13.7%, 4.4% for $PM_{2.5}$, respectively.

Characterization of Size Distribution and Water Solubility of 15 Elements in Atmospheric Aerosols

  • Park, Jeong-Ho;Sun, Jeong-Min;Park, Kum-Chan
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제17권E1호
    • /
    • pp.1-7
    • /
    • 2001
  • The elemental characteristics of atmospheric aerosols were investigated as a function of particle size and water solubility. The aerosol particles were samples at 12 individual size ranges between 0.01 and 30㎛. Collected aerosol particles were separated into both soluble and insoluble components. The concentrations of 15 elements in both components were determined by a PIXE analysis using a 2.0 MeV-proton beam. In general, the mass size distribution of particulate matter was represented as a bimodal distribution. The maximum rations of S in July and December were 5.5 and 3.8 %, and they appeared in the size range of 0.47∼1.17㎛(stage No. 6 or 7) . The ratios of a S at non-separated size were 3.1 and 2.2 % in July and December, respectively, On the other hand, the maximum rations of Si in July and December were 7.0 and 5.4% and they appeared in the size range of 5.1∼30㎛(stage No. 0∼2). The ratios of Si at the non-separated size were 2.1 and 1.8% in July and December, respectively, The mass diameter of 12 elements ranged between 0.59㎛ of S and 3.20 of Fe. More than 90% of atmospheric aerosols consisted of the light elements such as C, N, O, H and Al. The soluble component was dominant in the smaller size range and the insoluble component in the larger size range. Large portions of Si. Ti and Fe existed in insoluble state. By contrast, S, Cl, Ca, Zn and Br were dissolved in water.

자초염의 매염에 관한 실험연구 (The effect of color fastness on agent in the Gromwell Dyeing)

  • 주영주;소황옥
    • 복식
    • /
    • 제14권
    • /
    • pp.133-144
    • /
    • 1990
  • The purpose of this study is to investigate the absorbance of the Shikonin, one of the major purple pigments, and the stability against the effect of light, $O_2$, and temperature. The effect of mordant and mordanting condition to color and color-fastness is compared and analysed through the color-fastness-test, color-difference value-test, and IR-test. The results were as follows; 1. The absorbance of Shikonin was examinated through 6 kinds of solutions and distilled water. Shikonin was absorbed by solutions rather easily than distilled water. 2. The light effect to Shikonin indicated that the solution with the light was more stable than that without it. 3. The effect of $O_2$ to Shikonin showed that the solution with the $O_2$ was more stable that without it $O_2$. 4. Shikonin -methyl alcohol solution was stable in $25^{\circ}C$. It was unstable in $60^{\circ}C$ and $100^{\circ}C$ with lowered absorbance and changed colors. 5. Color-fastness test to silk and cotton indicated washing color-fastness and perspiration color-fastness was more than 3 grade. But the light color-fastness and crocking color-fastness was low. 6. The comparison between non -colored sample and colored-sample showed the latter was better in fastness. 7. Mordant as $Alk(SO_4)_2{\cdot}24H_2O$ and $AlCl_3{\cdot}6H_2O$ was better than anything else in fastness. 8. Color-difference value-test indicated that the mordant which had the jade green color, the original purple pigment color, was the best in use. 9. The best way to extract the original purple pigment color was in $25^{\circ}C$, because extracted dyeing solution by Soxhlet had the bluish color.

  • PDF

Application of Biological Accelorator Mass Spectrometry by 6 MV in KIST

  • 이기수;이경희;조혜미;이관호;김재열;유병용
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.146.2-146.2
    • /
    • 2014
  • KIST 6MV 가속기는 이온빔 분석 그리고 가속기 질량 분석법(Accelerator mass spectrometry)으로 활용된다. 이온빔 분석으로는 RBS, TOF ERD, PIXE. ${\mu}$-Probe을 할 수 있으며 AMS(Accelerator mass spectrometry)는 액체섬광측정법(LSC)과 비교할때 민감도는 1,000배 정도로 3H, 14C, 26Al,41Ca 을 10-21 ~ 10-18 mole/mg 까지 검출 가능하여. 응용분야로는 BAMS(Biological AMS), 전통과학, 지구과학, 환경과학에 활용되고 있다. 이중 AMS의 생-의학분야(BAMS)의 응용은 최근 매우 중요하게 연구되고 있다. BAMS의 활용 연구에 사용하는 핵종으로는 주로 3H, 14C, 41Ca, 36Cl를 사용하며, 14C 화합물은 쉽게 구할 수 있고, 자연방사선 이하의 낮은 14C labeled drug 사용하기 때문에 1948년 이후 생물학 연구에 혁신적으로 활용되고 있다. 주 활용분야로는 (1) 신약개발은 임상실험 전(Phase 0) 이용되며, 14C로 표지된 bio-molecule을 자연수준의 방사선 농도에서 추적자로 사용하여 질량을 측정하는 방법을 활용. (2) 의과학분야는 인체 내에서의 추적자 연구수행 (3) 항암제 연구는 암조직 중 약물농도와 암효과의 상관성을 연구 (4) 바이오 기술 분야에서는 생약 유효물질의 체내 대사연구 등을 할 수 있어 전세계적으로 활발히 연구가 진행되고 있다. KIST에서는 6MV가속기를 BAMS 연구에 활용하기 위하여 전처리 단계의 Combustion, Gas transfer, Reduction 등을 자체 제작하여 테스트 중에 있으며, BAMS 샘플의 Gas는 호기중의 성분, 대기 성분이 있으며, Liquid는 혈액(혈장,혈청,적혈구), Solid는 DNA, 세포, 장기 뼈, 피부, 식물조직, 사료, Drug 및 그 대사 류가 있다. AMS 측정 결과는 14C/12C 비율로 나타나며 그 결과를 농도로 환산하여 분석하게 된다. 또한 분석 데이터 신뢰를 확보하기 위하여 표준시료 및 품질관리용 시료를 사용하여 BAMS분석법에 대한 검증을 실시하였다.

  • PDF

Pseudomondas sp.에 의한 채소병원균의 생물학적 억제 (Biological Control of Plant Pathogen by Pmdornonas sp.)

  • 김교창;김홍수;도대홍;조제민
    • 한국미생물·생명공학회지
    • /
    • 제20권3호
    • /
    • pp.263-270
    • /
    • 1992
  • 채소 등 작물의 부패균인 Erwinia carotovora subsp. carotovora의 생육을 억제하는 길항세균을 경작지 표토층으로부터 분리하고 배양조건에 따른 억제력변화를 조사하고, 길항관련 유전자의 소재를 확인하였다. 분리균들중 가장 우수한 억제력을 갖는 S4, S14, S65 균주를 최종 선발하고 Pseudomonas 근연종으로 동정하였다. 523 배지를 사용하여 배양조건에 따른 억제력 변화를 조사한 결과 배지초기 pH를 7-8로 조정하여 $30^{\circ}C$에서 3일간 배양하였을 때 가장 높은 억제력을 보였고, 배지성분중 탄소원으로 mannitol과 sorbitol, 무기염으로 CaCl2를 첨가했을 때 효과적이었으나 질소원에 대한 감수성은 낮았다.

  • PDF