• Journal of Food Hygiene and Safety
• /
• v.20 no.3
• /
• pp.123-127
• /
• 2005

To determine the possibility of inflow routes for insect in Korean rice-wine, we investigated catalase (CAT) activity and oxygen bubble formation through stereoscopic microscope in pasteurized insects (bee, fly, fruit fly) treated with $H_2O_2$. The pasteurization condition was 30 and 60 min heating at 65 and $70^{\circ}C$. Bubble was not shown under the CAT level of 50 $\mumoles/min/ml$. CAT activity level was more sensitive compared with oxygen bubble formation, but the CAT activity had correlation with oxygen bubble formation method. We also tested bubble formation at room temperature, 65 and $70^{\circ}C$ for 30 days. The bubble formation was slowly decreased in all insects at room temperature during experiment, but it was rapidly decreased at 65 and $70^{\circ}C$. The fruit fly was not shown bubble formation at 65 and $70^{\circ}C$. These results suggest that bubble farmation method was a new simple method for inflow routes of insects caused by manufacturing and drinking process in pasteurized Korean rice-wine.

• Journal of Environmental Science International
• /
• v.4 no.4
• /
• pp.367-377
• /
• 1995

The study of flocculation kinetics is of fundamental interest in the field of water treatment, because rational study of the factors affecting the coagulation process should be based on the rate of particle growth. The effect of sulfate on flocculation kinetics were examined using ferric nitrate as a coagulant to coagulate kaolin clay in water under several experimental conditions. Both the particle size distribution data obtained from the AIA and the on-line measurement of turbidity fluctuation by the PDA were used to measure flocculation kinetics. Results show that sulfate ion added to the kaolin suspension played an important role in the flocculation process, not only improving flocculation kinetics at more acidic pH levels but also changing surface charge of particles. The kinetics of flocculation were improved mainly by the enhanced rate and extent of Fe(III) precipitation attributed to the addition of sulfate, and thereby, better interparticle collision frequency, but little by the charge reductions resulting from the sulfate addition. The increase in sulfate concentration beyond $3\times10^{-4}M (up to 2\times10^{-3}M)$ did not induce further improvement in flocculation kinetics, although the higher concentrations of sulfate ion substantially increased the negative ZP value of particles. Key Words : Flocculation Kinetics, Fe(III) Coagulant, Sulfate ion, Turbidity Fluctuation.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.60-65
• /
• 2021

The recycling of titanium turning scraps requires the removal of cutting oil and other contaminants remaining on the surface. In this study, an experiment was conducted in which titanium scraps were cleaned by a combination of ultrasonic immersion-steam cleaning and subsequent drying at high temperature. To determine the removal mechanism of cutting oil, the contact angle between titanium surface and cutting oil was measured. The result confirmed the optimum condition of the immersion solution of the titanium turning scraps. In the case of immersion cleaning of Na4P2O7 aqueous solution, the degree of carbon removed in the cutting oil was the highest at 50℃, and it was confirmed that the carbon content obtained from the combination of steam cleaning and ultrasonic immersion-steam cleaning was lower than that from steam cleaning after ultrasonic immersion. The oxidation and decomposition behaviors of cutting oil were investigated using Thermogravimetric analysis (TGA) and the result was applied in the high temperature drying process. From the results of the high temperature drying tests, it was concluded that 200℃ is the optimal drying temperature.

• Korean Journal of Veterinary Service
• /
• v.25 no.2
• /
• pp.117-126
• /
• 2002

Contamination levels of pathogenic microorganisms in 145 cases of beef, which were distributed in Gwangju province, had been investigated in each distributed stage and also monitored by general bacterial count and E coli count index. General bacterial count of beef from the slaughterhouse was 10$^4$cfu/g less than the level of promotion(10 cfu/$\textrm{cm}^2$) and E coli count index was also under the level of 10$^2$cfu/$\textrm{cm}^2$ recommended level of the ministry of agriculture and forestry. Pathogenic microorganisms were detected from 23.2% of samples in the consumption stage, 12.5% in the slaughtering stage and 5.6% in the transporting and processing stage. Staphylococcus aureus was isolated in the largest number and its ratio was 9.0%, listeria monocytogenes 5.5% and salmonella spp 1.4%. There were no samples that bacteria had been detected dually. E coli O157:H7 and campylobacter jejuni were not isolated. In raw and chilled beef, isolation rate of pathogenic microorganisms were 13.3% and 16.5% each. Especially in raw beef, L monocytogenes was. isolated in 3 samples among 30 cases (10%) and S aureus in one sample (3.3%). According to a scale of meat store, isolation rates of pathogenic microorganisms were different. It was 28.6% in the small-scale meat store and 16.7% in the large-scale meat store each. Four cases (16.7%) of S aureus were isolated in the large-scale meat store and seven cases (20.0%) of L monocytogenes and 2 cases (5.7%) of salmonella spp were isolated in the small-scale meat store. S aureus was isolated in two places among 10 feeding facilities of the elementary school. This result shows that the sanitation of elementary school feeding facilities is so poor and more careful policy consideration is needed. Eleven strains of S aureus isolated showed ${\beta}$-hemolysis on blood agar, 1 strain ${\alpha}$-hemolysis, and 1 strain ${\gamma}$-hemolysis. Isolated strains of L monocytogenes were reconfirmed in 560 bp by PCR. Conclusively, these results show that the sanitary condition in the stages of slaughtering, transportation-processing and consumption influences the degree of pathogenic microorganisms contamination in beef severely It is necessary to apply thoroughly hazard analysis critical control point in a process of beef distribution and also to develop rapid test methods for microorganism diagnosis. This effort is very important for the supply of safe and clean meat from farm to table and helpful for the improvement of public health.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.143-148
• /
• 2018

Sodium silicate based silica aerogels are lower in cost than silica alkoxide based silica aerogels, but the demand is decreasing as their physical properties are lowered. In this research, acetonitrile as a drying control chemical additive (DCCA) is added in the sol state to improve the pore-structural properties of sodium silicate based silica aerogel by preventing the agglomeration of particles and cross-linked bond. The sodium silicate based silica aerogel by ambient pressure drying were prepared by sol-gel process. Acetonitrile/$Na_2SiO_3$ molar ratio of 0, 0.05, 0.1, 0.15, and 0.2 was added to the sol state. The physical properties of the final product were analyzed using Fourier transform infrared, contact angle measurement, Brunauer-Emmett-Teller and Barrett-Joyner-Halenda measurements and field emission scanning electron microscopy. It was confirmed that the sample with adding 0.15 molar ratio of acetonitrile and sodium silicate showed a high specific surface area ($577m^2/g$), a high pore volume (3.29 cc/g), and a high porosity (93%) comparable to the pore-structural properties of silica alkoxide based silica aerogels.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.7
• /
• pp.103-111
• /
• 2020

Performance indicators have often investigated and developed in order to identify foundational elements and factors for an enhancement of performance in sports. In order to identify the valid performance indicators it is important that the indicators used within a performance analysis system discriminate between the winning and losing performances within a match (Hughes and Bartlett, 2002). However, the performance indicators proposed in research studies on basketball performance have not been used for real-time analysis and feedback within a coaching context. Such real-time support for the coach and players has been described within research on other sports (Choi et al., 2004; O'Donoghue, 2001; Palmer et al., 1997). Within the process of real-time feedback, the identification of relevant performance indicators that distinguish winning and losing performances should be the first stage of the development of a real-time analysis system. Therefore, this study investigated the differences between winning and losing teams in terms of a set of performance indicators gathered during the analysis of 10 English National Basketball League matches. Winning and losing teams were compared using whole match data (N=10) as well as individual quarters (N=40). A series of Wilcoxon Signed Ranks tests was used to identify the relevant performance indicators that discriminate between winning and losing performers within whole matches and individual quarters. The tests found that 3 point shots made (p<0.05) and Assists (p<0.05) were significantly different between winning and losing teams within matches. However, 2 point shots made (p<0.05), 2 point shots attempted (P<0.05), percentages of 2 point shots scored (p<0.05), 3 point shots made (p<0.05), Defensive Rebounds (p<0.05) and Assists (p<0.05) were significantly different between winning and losing performance within quarters. The analysis task should be based on relevant performance indicators which explain the current performances to performance analysts and coaches. Within a real-time analysis and feedback scenario, this will have the additional benefit of supporting a decision based on immediate performance within the most recent quarter. Consequently, the real-time analysis system would use performance indicators which have the property of construct validity to support the decisions of the coach.

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.327-332
• /
• 1999

The recovery activation energy, the order of reaction and the recovery rate constant were detemined by isochronal and isothermal annealing treatment to investigate the recovery behaviors of neutron irradiated Mn-Mo-Ni low alloy steels$(fluence: 2.3\times10^{19}ncm^{-2}, 553K, E\geq1.0 MeV)$. Vickers microhardness tests were conducted to trace the recovery behavior after heat treatments. The results were analyzed in terms of recovery stages, behavior of responsible defects and recovery kinetics. It was shown that recovery occurred through two annealing stages(stage I : 703-753K, stage n : 813-873K) with re$\infty$very activation energies of 2.5 eV and 2.93 eV for each stage I and n, respectively. From the comparison of unirradiated and irradiated isochronal anneal curves, a radiation anneal hardening(RAH) peak was identified at around 813K. Most of recovery have occurred during about 120 min irrespective of isothermal annealing temperatures of 743K and 833K. Recovery rate constants were determined to be $3.4\times10^{-4}min^{-1} and 7.1\times10^{-4}min^{-1}$ for stage I and II, respectively. The order of reaction was about 2 for both recovery stages. Comparing the obtained data with those of previously reported results on neutron irradiated Mn- Mo- Ni steels, the thermal recovery be­havior of the present material seems to occur by the dissociation of point defect clusters formed during irradiation, and by the recombination process of self-interstitials and vacancies from dissociated vacancy clusters.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.3
• /
• pp.289-296
• /
• 1985

To clarify the soil characteristics and genesis of the clayey terrace soils distributed in Yeongcheon (inland region) and Yeongil (coastal region), 9 typifying pedons including a recent local deposits were studied. The physico-chemical properties found were summarized as follows; 1. The contents of available water of the terrace soils were ranged from 12.0 to 20.3%. They were increased with increaseing clay content up to 35%, and then decreased at clay content of 35 to 55%, but were maintained about 12 to 13% when the clay content exceeds 55%. 2. The amount of water stable aggregates in the surface soils were ranged from 55.0 to 81.1%, and were low in cultivated upland where water erosion were accelerated while high in the paddy where the double cropping were practiced. The index of aggregate in cultivated upland were higher in the surface soils but the paddy soils were higher in subsoils. 3. The colloidal reactions checked by the differences between pH in $0.01N-Na_2SO_4$ and $H_2O$ indicate exchangeable acidity to exchangeable neutrality, which means a sort of Red-yellow soil forming process had been prevailed during genesis of the terrace soils. 4. Cation exchange capacity of the clayey terrace soils were averaged about 15.8-20.2me/100g of fine earth and 35.6-52.6me/100g of clay. The rates of base saturation were 32.7 to 57.6% and the rates decreased with increasing the elevations of terraces. 5. The activities of free iron oxides were 0.061 to 0.739 and the values decreased with increasing elevation while the crystallinity index of iron oxides positively correlated with elevations the values ranged from 0.067 to 0.537.

• Journal of KIISE:Information Networking
• /
• v.31 no.5
• /
• pp.490-500
• /
• 2004

In mobile/wireless environment, mobility management is widely being focused as one popular researches. But, disruption happens when messages are exchanged between nodes as registration is made after handoff, and unnecessary traffic occurs because of the use of the Random-walk model, in which the probability for MN to move to neighboring cells is equal. In order to solve these problems, this study proposes a technique and algorithm for composing Directional Shadow Registration Region (DSRR) that provides seamless mobility. The core of DSRR is to prevent disruption and unnecessary traffic by minimizing the number o) neighboring cells with a high probability of handoff (AAAF). This study sensed the optimal time for handoff through regional cell division by introducing a division scheme, and then decided DSRR, the region for shadow registration, by applying direction vector (DV) obtained through directional cell sectoring. According to the result of the experiment, the proposed DSRR processes message exchange between nodes within the intra-domain, the frequency of disruptions decreased significantly compared to that in previous researches that process in inter-domain environment. In addition, traffic that occurs at every handoff happened twice in DSRR compared to n (the number of neighboring cells) times in Previous researches. As an additional effect, divided regions obtained from the process of composing DSRR filter MN that moves regardless of handoff.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.1
• /
• pp.62-69
• /
• 2008

There has been a recent trend in Korea that treatments for combustible wastes among municipal solid waste (MSW) by those methods, such as incineration and landfill are restricted as much as possible and Mechanical Biological Treatment (MBT) are encouraged actively in order to promote resource recovery. To build and operate properly these facilities, the physicochemical characteristics of MSW should be analyzed precisely beforehand. In particular, designing a crusher or separator properly which is the main process in MBT facilities of MSW. require the information on the size distribution characteristics of MSW, but they are nor sufficient in the qualities and quantities yet as of now. Accordingly, this study aims to evaluate size distribution characteristics of MSW and its physicochemical characteristics by size. The samples of MSW were collected from detached dwelling area, apartment area, business area, and commercial area of A city in Korea. According to the result of analysis, paper records 29.78~60.02% by wet weight basis, so it was the most regardless of the regions where the wastes were generated. And in terms of element analysis, Carbon(C) was 34.77~44.39%, the largest friction, and Oxygen(O) was the next occupying 19.46~33.71%. As indices of RDFs, Chlorine(Cl) was 0.39~0.83%, so it was less than the standard, 2.0%(by dry weight basis); moreover, Sulfur(S) did not exceed the standard, 0.6%, either. In the size distribution of MSW, waste fraction ranging 50~80mm in diameter was the most in combustible waste while 30~50mm was in incombustible waste.