• Title/Summary/Keyword: $AT_4$

Search Result 138,590, Processing Time 0.105 seconds

Comparison of Fretting Wear Characteristics of Zircaloy-4 Tube in Light Water and in Air (지르칼로이-4 튜브 프레팅 마멸 특성의 환경 의존성과 마멸기구)

  • 조광희;김석삼
    • Tribology and Lubricants
    • /
    • v.15 no.1
    • /
    • pp.83-89
    • /
    • 1999
  • The fretting wear behaviour of Zircaloy-4 tube used as the fuel rod cladding in PWR nuclear power plants has been investigated at the different test environment, in light water and in air as a function of slip amplitude, normal load, test duration and frequency. Zircaloy-4 tubes were used for both of oscillating and stationary specimens. A fretting wear tester was designed to be suitable for this fretting test. The wear volume and specific wear rate of Zircaloy-4 tube in water was greater than those in air under various slip amplitude. Delaminates and surface cracks were observed at low slip amplitude and high load of fretting test in water, but the traces of adhesion and plowing were observed at and above 200 Um. The water accelerates the wear of Zircaloy-4 tube at lower slip amplitude in fretting.

Melt Copolymerization Reactions between 1,3-Bis(diethylamino)tetramethyldisiloxane and Aryldiol Derivatives

  • Jung, In-Kyung;Park, Young-Tae
    • Bulletin of the Korean Chemical Society
    • /
    • v.32 no.4
    • /
    • pp.1303-1309
    • /
    • 2011
  • Melt copolymerization reactions of bis(diethylamino)tetramethyldisiloxane with several aryldiols were carried out to afford poly(carbotetramethyldisiloxane)s containing fluorescent aromatic chromophore groups in the polymer main chain: poly{oxy(4,4'-biphenylene)oxytetramethyldisiloxane}, poly{oxy(1,4-phenylene)oxytetramethyldisiloxane}, poly[oxy{(4,4'-isopropylidene)diphenylene}oxytetramethyldisiloxane], poly[oxy{(4,4'-hexafluoroisopropylidene)diphenylene}oxytetramethyldisiloxane], poly{oxy(2,6-naphthalene)oxytetramethyldisiloxane}, poly[oxy{4,4'-(9-fluorenylidene)diphenylene}oxytetramethyldisiloxane], poly{oxy(fluorene-9,9-dimethylene)oxytetramethyldisiloxane}, and poly[oxy{4,4'-(9-fluorenylidene)bis(2-phenoxyethylene)}oxytetramethyldisiloxane]. These materials are soluble in common organic solvents such as $CHCl_3$ and THF. The FTIR spectra of all the polymers exhibit the characteristic Si-O-C stretching frequencies at 1021-1082 $cm^{-1}$. In the THF solution, the polymeric materials show strong maximum absorption peaks at 215-311 nm, with strong maximum excitation peaks at 250-310 nm, and strong maximum fluorescence emission bands at 310-360 nm. TGA thermograms indicate that most of the polymers are stable up to $200^{\circ}C$ with a weight loss of less than 10% in nitrogen.

Grignard Metathesis Polymerization and Properties of 1,1-Disubstituted-2,5-dibromo-3,4-diphenylsiloles

  • Park, Young Tae
    • Bulletin of the Korean Chemical Society
    • /
    • v.35 no.6
    • /
    • pp.1825-1831
    • /
    • 2014
  • Grignard metathesis polymerizations of 1,1-disubstituted-2,5-dibromo-3,4-diphenylsiloles such as 1,1-dimethyl-2,5-dibromo-3,4-diphenylsilole, 1,1-diethyl-2,5-dibromo-3,4-diphenylsilole, 1,1-diisopropyl-2,5-dibromo-3,4-diphenylsilole, and 1,1-dihexyl-2,5-dibromo-3,4-diphenylsilole were performed to yield poly(1,1-disubstituted-3,4-diphenyl-2,5-silole)s containing fluorescent aromatic chromophore groups such as phenyl and silole in the polymer main chain: poly(1,1-dimethyl-3,4-diphenyl-2,5-silole), poly(1,1-diethyl-3,4-diphenyl-2,5-silole), poly(1,1-diisopropyl-3,4-diphenyl-2,5-silole), and poly(1,1-dihexyl-3,4-diphenyl-2,5-silole), respectively. The obtained materials are highly soluble in common organic solvents such as chloroform and tetrahydrofuran. Fourier-transform infrared spectra of all the polymers have characteristic C=C stretching frequencies at $1620-1628cm^{-1}$. The prepared organosilicon polymers exhibit strong absorption maximum peaks at 273-293 nm in the tetrahydrofuran solution, showing a red-shift of 18-34 nm relative to those of the monomer, strong excitation maximum peaks at 276-303 nm, and strong fluorescence emission maximum bands at 350-440 nm. Thermogravimetric analysis shows that most of the polymers are stable up to $200^{\circ}C$ with a weight loss of 6-16% in nitrogen.

Foaming Capacity and Foaming Stability of Protein Recovered from Red Crab Processing Water (홍게 가공회수 단백질의 거품 형성력 및 안정성)

  • Kim, Yong-Jin;Sin, Tae-Seon;O, Hun-Il
    • The Korean Journal of Food And Nutrition
    • /
    • v.9 no.3
    • /
    • pp.325-330
    • /
    • 1996
  • Foaming capacity (FC) and stability (FS) of protein recovered from red crab (Chitinonecetes opilio) processing in water and soybean protein isolate were determined at pH 2.0~10.0 in water and NaCl solution. The FC values for both proteins showed the lowest values at the isoelectric point (pH 4.0) and increased nth an increase in pH above the isoelectric point. FC of RCP was higher than that of SPI at pH 10.0 in water and both NaCl solutions. FC of SPI increased with an increase in NaCl concentration at pH 4.0 and 6.0, but FC of RCP was not affected. The highest FS values for both proteins were obtained at pH 4.0 in water. At pH 2.0, FC of RCP decreased with NaCl concentration increase, but FS increased. NaCl concentration had little effect on FS of RCP at pH 4.0 and 6.0, but the FS decreased at pH 10.0. FS of SPI was similar to that of RCP at pH 2.0 and increased with NaCl concentration Increase from 0.1 to 0.5M NaCl at pH 10.0.

  • PDF

Effect of Priming and Preimbibition on Germination of Zoysiagrass Seeds (Priming과 침지처리가 들잔디의 종자발아에 미치는 영향)

  • 김태일;구자형
    • Asian Journal of Turfgrass Science
    • /
    • v.8 no.1
    • /
    • pp.1-11
    • /
    • 1994
  • Studies were conducted to evaluate the effect of priming and preimbibition on gerraination of unscarified and KOH-scarified zoysiagrass (Zoysia japonica Steud.) seeds, respectively. Germi-nation percentages at 35˚C of seeds primed in $KNO_3$ and Ca($NO_3$)$_2$ were significantly higher than that of untreated seeds. The optimum conditions for priming unscarified seeds were in aerated $KNO_3$ solution at O4 M for 4 days at 20˚C. No additional benefit of $GA_3$ on increasing germination was not found in seed priming with solution of $KNO_3$ + $GA_3$ or in seeds preimbibed with $GA_3$ after priming. Scarified seeds preimbibed with distilled water(DW) for 4 days at 20˚C germinated higher and with fewer days to 50% of total germination(T 50) than untreated seeds. Preimbibition with $GA_3$ solution at 50 ppm for 4 days at 5, 10, 15 and 20˚C enabled up to 97% of seeds to germinate and reduced days to T 50 about 1.1 to 1.2 days at 35˚C Especially, seeds preimbibed with $GA^2$˚$_3_2_1$$\times$ had greatly higher germination and lower T 50 than untreated or DW-preimbibibed seeds at 30˚C, which is inadequate to germination in general. Preimbibed seed performance was unchanged after storage at room temperature for 50 days. Seeds preimbibed with GA $_3$ had higher rate of seedling emergence and faster growth of shoot than untreated seeds after sowing at 30˚C in growing medium in growth chamber.

  • PDF

Effect of pH on Lipid Accumulation and Fatty Acid Composition of Molds (pH가 곰팡이의 지질 축적과 지방산 조성에 미치는 영향)

  • Son, Byung-Hyo;Lee, Yung-Geun
    • Journal of the Korean Applied Science and Technology
    • /
    • v.4 no.2
    • /
    • pp.31-34
    • /
    • 1987
  • Effect of initial PH on the lipid accumulation and fatty acid composition of some species of mold were investigated. The maximum lipid content content produced by Aspergillus niger var. macrosporus was 17.5% at PH 3.5, by Aspergillus fumigatus 23.5% at PH 3.5 by Penicillium spinulosum 12.0% at PH 4.0 and by Penicillium notatum 7.3% at PH 4.0. The major fatty acids were palmitic, stearic, oleic and linoleic acid in all experimental molds. At PH from 4.5 to 6.0, the proportion of linoleic acid was increased and those of palmitic and oleic acid were decreased with rising in PH, therefore, degree of lipid unsaturation was increased in all experimental molds.

Solid State Dynamic Nuclear Polarization of 1H Nuclear Spins at 0.3 T and 4.2 K

  • Shim, Jeong Hyun
    • Journal of the Korean Magnetic Resonance Society
    • /
    • v.21 no.4
    • /
    • pp.114-118
    • /
    • 2017
  • Here, I report solid state Dynamic Nuclear Polarization (DNP) of $^1H$ nuclear spins at 0.3 T and 4.2 K. The DNP polarizer was developed based on a commercial X-band Electron Spin Resonance (ESR) modified for DNP, in combination with a NMR console and a liquid-Helium cryostat. By detuning magnetic field, DNP spectrum was measured to find the optimal condition. At +3 mT detuned from on-resonance field, $^1H$ NMR signal of 60:40 glycerol/water frozen solution doped with 20 mM perdeuterated-Tempone was amplified 43 times. The $^1H$ spin polarization obtained at 4.2 K is over 3100 times higher than that at 300 K. The width of the DNP spectrum, which is five times broader than ESR spectrum, is inconsistent with solid effect or thermal mixing, and presumably suggests a different DNP mechanism.

Natrate reductase activity of 4 mosses including ctenidium molluscum in relation to increasing acidic deposition from atmosphere (大氣中의 酸性降下物의 增加에 따른 Ctenidium molluscum 등 4 종 蘇類의 窒酸還元酵素 活性)

  • Ihm, Byung-Sun;Lee, Jeom-Sook
    • The Korean Journal of Ecology
    • /
    • v.15 no.4
    • /
    • pp.355-363
    • /
    • 1992
  • Nitrate reductase activity(NRA) and induced NRA were compared in 4 species of moss ctenidium molluscum, homalothecium, tortella tortusa and neckera crispa collected from limestone in england. the NRA and dry weight of the c. molluscum were also measured after spraying with acidic deposition adjusted to ph 5.6, 4.6, 3.6 and 2.8 with one of two molar ratios of nitric to sulfuric acid, i.e. 1:0(N alone) and 1:2(1N+2S) for 20 days. All 4 species showed high NR leavels in the upper part of cut shoots and occurred maximum inducation of NRA within 6h. c. molluscum had the highest NRA levels among 4 species. after daily spraying of acidic deposition, NRA of c. molluscum was increased much more largely at ph 6 and ph 3.6 derived from N alone than from 1N+2S. However that was decreased at ph 2.8 derived both from N alone and 1N+2S . Decline of dry weight had occurred at ph 3.6 and 2.8 derived both from N alone and 1N+2S. Whereas substantial fertilization effect was observed at ph 4.6 derived from N alone. the data suggest that c. molluscum are able to utilize nitrate more effectivery than any other species, and NRA induction are more sensitive than growth response to nitrogen content of acidicdeposition in a short- term. however toxic effects was detected at high $NO_3$ supply and low phacidic deposition.

  • PDF

Studies on the Present State of Acid Precipitation in Seoul Area (서울地域의 酸性强雨現像에 關한 硏究)

  • 박성배;박상현;김민영;강희곤;김영광;이상열
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.5 no.2
    • /
    • pp.42-54
    • /
    • 1989
  • This study was carried out to investigate the phenomena of acid precipitation. The pH value, electro conductivity and major anions (sulfate, nitrate and chloride) were measured by automatic acid rain monitor and ion chromatography at 5 points in Seoul area from Jan. to Dec. 1988. 1. The acidity of rainfall was in order winter (4.31) spring (4.77) fall (4.94) summer (5.31). Rainfall with a pH of less than 5.6 was appeared 83.2 percent. 2. The range of the highest appearence frequency rate both at Hannam-dong and Songsu-dong was from pH 4.6 to 5.0 and appeared 30.7 percent and 38.3 percent respectively, Bang-i-dong was 36.3 percent in the ranged from pH 4.1 to 4.5 and Guro and Ssangmun-dong were 26 percent and 30.3 percent in the ranged from pH 5.1 to 5.5 respectively. 3. The sulfate and nitrate ion concentration in earlier rainwater ranged from 0.1 ppm to 50.2 ppm and from 0.01 ppm to 15.8 respectively. The earlier rainwaters were generally more acidic than the after rainwaters. 4. The order of the major anion concentration in rainwater was $SO_4^{2-} > Cl^- > NO_3^-$ and the acidity of it was more effective by sulfate ion than others. The correlation between pH value and anions concentration was shown positive correlationship at Guro-dong and Bang-i-dong and negative correlation at Hannam-dong but not at the other sites.

  • PDF

The Effects of the Testing Temperatures on the Mechanical Properties of the Carbon Tool Steel(SK4M) for Flat Spring (박판 스프링용 탄소공구강재(SK4M)의 시험온도에 따른 기계적 특성)

  • 류태호;원시태;박상언;임철록
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2002.10a
    • /
    • pp.693-696
    • /
    • 2002
  • This study examined the effects of the testing temperature on the mechanical properties of the carbon tool steel (SK4M) for flat spring. Hardness test and fatigue test were performed at room temperature ($20^{\circ}C$). Tensile test and creep test were performed at temperature range $20^{\circ}C$ ~$160^{\circ}C$. The micro-vickers hardness values of SK4M was Hv=584. The Elastic modulus, tensile strength and yield strength of SK4M at 160t test temperature were decreased 0.92 time, 0.97 time and 0.82 time those of SK4M at 2$0^{\circ}C$ test temperature, respectively. The maximum creep strain for 100hr at creep temperature ($80^{\circ}C$ ~$160^{\circ}C$) and creep stress ($37.4Kgf/\textrm{mm}^2$ ~$93.6Kgf/\textrm{mm}^2$) was 0.572%. The fatigue limit of SK4M was $94Kgf/\textrm{mm}^2$.

  • PDF