• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.440-447
• /
• 2024

Purpose: The number of registered vehicles in Korea continues to increase. As traffic volume increases gradually due to improved quality of life, the severity of accidents is expected to increase and congestion problems are also expected. Therefore, it is necessary to analyze the accident factors of pointed traffic accidents and non-pointed traffic accidents. Method: The severity of the apical and non-pointed traffic accidents in Incheon Metropolitan City is analyzed by dividing them into apical and non-pointed traffic accidents to investigate the factors affecting the accident. XGBoost machine learning techniques were applied to analyze the severity of pointed and non-pointed traffic accidents and visualized as plot through the results. Result: It was analyzed that during non-peak hours, such as the case of the victim's vehicle type at peak times, the victim's vehicle type and construction machinery are variables that increase the severity of the accident. Conclusion: It is meaningful to derive the seriousness factors of apical and non-pointed accidents, and it is hoped that it will be used to reduce congestion costs by reducing the seriousness of accidents in the case of apical and non-pointed in the future.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.39-45
• /
• 2008

A levitation rail is placed on the top of track structure to operate Maglev vehicles and a part of track that link up with a sleeper is applied repeated load in Maglev vehicles operation. This paper aimed to verify validity of design for levitation rail, through the fatigue analysis about load which is applied to levitation rail in Maglev vehicles operation and impact load occurring in an emergency landing. Load conditions applied design load(23kN/m) in normal operation and skid drop load(24kN/m) in vehicle drop. And boundary conditions are consider bolt fixing and welding. Through static analysis, weak point and maximum stress of levitation rail could be obtained. S-N(stress-life) method was used in oder to predict fatigue life, and Goodman relationship was applied to consider a effect of mean stress. Also damage was calculated by using Miner's. As a result of fatigue analysis, levitation rail had a fatigue life which was more than requirement ($10^6$cycle) in all analysis conditions. Assumption that $10^8{\sim}10^9$cycles is infinite life, all analysis conditions had infinite life except a case under drop load and bolt fixing($1.21{\times}10^6$).

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.5
• /
• pp.437-448
• /
• 2015

The purpose of this study is to present the source contribution of the fine particles ($PM_{2.5}$) in Chungju area using the CMB (chemical mass balance) method throughout the four seasons in Korea. The Chungju's annual average level of $PM_{2.5}$ was $48.2{\mu}g/m^3$, which exceeded two times higher than standard air quality. Among these particles, the soluble ionic compounds represent 54.2% of fine particle mass. Additionally, the OC concentration in Chungju stayed similar to other domestic cities, while the EC concentration decreased significantly compared to other domestic/international cities. The concentration of sulfur represented the highest composition (8%) among the fine particle compounds. According to the CMB results, the general trend of the $PM_{2.5}$ mass contributors was the following: secondary aerosols (50.5%: ammonium sulfate 26.5% and ammonium nitrate 24.0%) > gasoline vehicle (18.3%) > biomass burning (11.0%) > industrial boiler (6.0%) > diesel vehicles (4.4%). The contribution of the secondary aerosols was the main cause than others. This impact is assumed to be emitted from air pollutants of urban cities or neighbor countries such as China.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.6
• /
• pp.866-886
• /
• 1995

The purpose of this study is to analyze the pattern and the meaning of textiles, and decorative techniques of ikat weaving and dyeing in Indonesia. The textile design also analyzes by examining the method of ikat techniques such as warp ikat, weft ikat and double ikat, and by classifying the style of regions. The most common motifs are geometric designs of spirals, meanders, straight lines, triangles, and circles which are influenced by outside world. Although these motifs or symbols have been evident since prehistoric times, their design and meaning have been continually reinterpreted as changes in the ceremonies and rituals. While motifs such as reptiles, birds, and human figures, depicted in spiral, hooked and rhomb configurations, have been identified among the most resilient features of Indonesian textile design, new meanings have been added to these ancient forms, and designs have been transformed and reinterpreted to suit local conceptions. Since textiles are a visual expression of Indcufsian life, textiles place the individual symbolically within social milieu, identifying rank, family, locality and religious affiliations. Textiles represent a link between the human and the spiritual realm, and a vehicle for the display of sacred and secular potency Ikat textiles play to embody special transforming powers and sacred mediating qualities, providing protection and evoking life-enriching forces for individuals or social group.

• Journal of the Korean Society for Heat Treatment
• /
• v.27 no.1
• /
• pp.1-9
• /
• 2014

For connector material applications, the influence alloying elements of Mn, Cr, Fe, and Ti and cold rolling reduction on the mechanical property, electrical conductivity and bendiability of Cu-Ni-Si-P alloy was investigated. The hot rolled plates were solution treated at $980^{\circ}C$ for 1.5 h, quenched into water, cold rolled by 10% and 30% reduction in thickness, and then aged at $440{\sim}500^{\circ}C$ for 3, 4, 5 times. respectively. Cu-Ni-Si-P-x alloys cold rolled by 10 reduction before heat treatment have a good bendability compare to cold rolled by 30 reduction. Cu-3.4Ni-0.8Si-0.03P-0.1Ti shows the peak strength value of 759 MPa, an electrical conductivity of 39%IACS, an elongation of 10% and a hardness of 256 Hv aged at $440^{\circ}C$ for 6 hrs. Thus it is suitable for lead frame and connector.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.6
• /
• pp.3-9
• /
• 2000

The Bell King Songdok the Great tolls magnificient sound that would be a great vehicle which brings all beings to the Sutras. Since 693, there was a magic flute, MANPASIKJUK, which was in existence in Shilla Dynasty that could lull all the evil-wawes, such an plaques, storms, Droughts, Famines and even Enemies. Thus, a sound tube, MANPASIKJUK, was erected in the crown of the Bell Songdok the Great so as to be effective to emit the nominal frequency tone whenever the Bell tolls for the national prosperity and welfare the People. Therefore, the Bell makers tried to fine the transmissibility condition through the sound tubr, several times during 34 years, However, it seems to be unfinished. Ever since, all of the korean Brahman Bell have the sound tubes of MANPASIKJUK, but none is performed their own functions. Here, one of the way to let the function of the sound tube of MANPASIKJUK out in the Bell Songdok the Great is proposed. There are two steps: the 1st is to elongate 18cm to the present length 77cm to fulfill the transmissibility condition for the nominal frequency of sound is emitted through the corrected sound tybe. 2nd step is to rise to 95% of the emission of the tone of nominal frequency, so that an exponential hem with the flare constant 2.8m-1, length 2.259m and the radius of the mouth 1.772m is to be extended to the corrected sound tube.

• Korean Journal of Veterinary Research
• /
• v.25 no.2
• /
• pp.187-195
• /
• 1985

The Present study has been carried out to elucidate the antiestrogenic effects of tamoxifen in uteri of immature rats. Immature female Sprague-Dawley rats were allocated into 4, groups and injected with $5{\mu}g$ of estradiol-$17{\beta}$, $50{\mu}g$ of tamoxifen, a combination of both or vehicle only subcutaneously three times after an interval of 24 hours respectively. The concentrations, of cytosol estradiol receptor in uterus were measured by DCC method before and 1, 3, 6, 12, 24, 48 and 72 hours after the above treatments and those of nuclear estradiol were measured by protamine exchange method 72 hours and those of nuclear estradiol were measured by protamine exchange method 72 hours after the above treatments. The results obtained were summarized as follows: 1. The binding affinity of tamoxifen to estradiol receptor in uterine cytosol was lower than that of estradiol-$17{\beta}$, accordingly the translocation of estradiol receptor into the nucleus was found to be delayed. 2. Tamoxifen caused the retention of estradiol receptor in nucleus over 24 hours and inhibited the replenishment of the receptor from nucleus to cytosol in uterus.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.5
• /
• pp.638-644
• /
• 2016

In this research, theoretical study on empirical analysis method to estimate waterdrop's deformation by shock wave is presented. Flow field is calculated using theoretical and empirical relations. Waterdrop's deformation including movement, size, mass, and orientation is modeled using empirical relations derived from existing experimental data. Developed method is applied to specific flight examples with arbitrary flight speed and vehicle's configuration. The flight speed is assumed to Mach number of 2 and 4. The diameter of waterdrop is varied from 1 to 5 mm. Waterdrops along the stagnation line in front of hemispherical nose with the radius of 50 mm and around a cone-shaped side wall with the half angle of 20 degree are considered. It is found that the maximum diameter of the waterdrop is increased up to 2.77 times the initial diameter. The mass is conserved more than 66.7 %. In the case of a cone-shaped side wall, waterdrop's orientation angles defined from the flight direction when the Mach number is 2 and 4 are calculated as 33.0 and 25.6 degree, respectively.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.414-424
• /
• 2017

This paper introduces an experimental device which can measure accurate aerodynamic forces without support interference in wide experimental region for wind tunnel test of micro aerial vehicles (MAVs). A stereo pattern recognition (SPR) method was introduced to a magnetic suspension and balance system (MSBS), which can eliminate support interference by levitating the experimental model, to establish wider experimental region; thereby MSBS-SPR integrated system was developed. The SPR method is non-contact, highly accurate three-dimensional position measurement method providing wide measurement range. To evaluate the system performance, a series of performance evaluations including SPR system measurement accuracy and 6 degrees of freedom (DOFs) position/attitude control of the MAV model were conducted. This newly developed system could control the MAV model rapidly and accurately within almost 60mm for translational DOFs and 40deg for rotational DOFs inside of $300{\times}300mm$ test section. In addition, a static wind tunnel test was conducted to verify the aerodynamic force measurement capability. It turned out that this system could accurately measure the aerodynamic forces in low Reynolds number, even for the weak forces which were hard to measure using typical balance system, without making any mechanical contact with the MAV model.

• Journal of the Korean Society of Safety
• /
• v.22 no.6
• /
• pp.13-19
• /
• 2007

Diesel car's smoke measurement equipment and method were investigated based on the exhaust gas regulations. Reflection photo method and light extinction method for measuring smoke were compared under conditions of both no load mode and Lug-down 3 mode. Free acceleration mode at no load condition was used for regular inspection of diesel car, and Lug-down 3 mode was used for fine inspection of the diesel car. A correlation between no load mode and Lug-down 3 mode was investigated in this research. The smoke measured with reflection photo method was 1.5${\sim}$2 times higher than that of light extinction method The correlation coefficient between reflection photo method and light extinction method for measuring smoke was 0.83, which shows comparatively high correlation between the two methods for measuring smoke in diesel engines.