• ETRI Journal
• /
• v.33 no.1
• /
• pp.13-17
• /
• 2011

A highly miniaturized on-chip $180^{\circ}$ hybrid employing periodic ground strip structure (PGSS) was realized on a silicon radio frequency integrated circuit. The PGSS was placed at the interface between $SiO_2$ film and silicon substrate, and it was electrically connected to top-side ground planes through the contacts. Owing to the short wavelength characteristic of the transmission line employing the PGSS, the on-chip $180^{\circ}$ hybrid was highly miniaturized. Concretely, the on-chip $180^{\circ}$ hybrid exhibited good radio frequency performances from 37 GHz to 55 GHz, and it was 0.325 $mm^2$, which is 19.3% of a conventional $180^{\circ}$ hybrid. The miniaturization technique proposed in this work can be also used in other fields including compound semiconducting devices, such as high electron mobility transistors, diamond field effect transistors, and light emitting diodes.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.18-25
• /
• 1994

If a 4-port network is terminated by arbitrary impedances, there are great advantageges in composing systems with it. The distributed 3-dB $O^{\circ}$/180$^{\circ}$ hybrid with the impedances asymmetrically terminated is presented. In the band of UHF and VHF. on the basis of it , the new design method of small sized- hybrid using both lumped and distributed elements is also presented and analyzed At the center frequency of 900MHz. 3-dB $O^{\circ}$/180$^{\circ}$hybrid on the RT/Duroid substrate of ${\varepsilon}_{r}$=2.2, h=0.76mm is design and tested. Agreements are obtained between measured and theoretical results and at the same time the occupied area of it is reduced more than 70% compared with only distributed-type circuits.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.3
• /
• pp.25-32
• /
• 1992

In UHF, VHF new design method of samll-sized 3-dB 0$^{\circ}$/180$^{\circ}$ ring hybrid terminated arbitrary impedance using both lumped elements and distributed elements is presented. At the center frequency of 900 MHz, 3-dB 0$^{\circ}$/180$^{\circ}$ ring hybrid terminated arbitrary impedance is designed, analyzed and tested. Good agreements are obtained between measured and theoretical modeling results, and at the same time, the circuit area of hybrid fabricated with two dimensional parallel coupled line, distributed elements and lumped elements is reduced by more than 70% compared with only distribyted-type circuits.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.175-178
• /
• 2006

We present a ring hybrid balun with additional two ${\lambda}/4$ short stubs that offers excellent amplitude and phase balance performance. The phase difference which is essentially occurred in $180^{\circ}$ ring hybrid is compensated by a ${\lambda}/4$ short stub in one output port. To compensate the amplitude imbalance inherent in the ring hybrid, the series resistance will be added to the second stub which is connected to another output port. The measured balun shows that phase imbalance is less than $2.5^{\circ}$ and magnitude imbalance is less than 0.2dB over a 1.75-2.25 GHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.3 s.333
• /
• pp.33-38
• /
• 2005

In this paper, we have designed and fabricated a hybrid ring coupler to prove the fabrication possibility of various passive components, applying millimeter wave using newly proposed transmission lines, i.e. BAMLs. The characteristics of the fabricated hybrid ing coupler were a the S31(coupling) of 3.58 dB, the S21(thru) of 3.31 dB at the 60 GHz center frequency, the S11(return loss) over 16.17 dB, S41(isolation) over 55 dB at 61 GHz, and the phase difference between port 2 and port 3 of $180{\pm}loat$ 60GHz. In order to reduce the size of hybrid ring coupler, we designed the hybrid ring coupler which inserts a slow wave structure. With this structure, we were able to reduce the hybrid ring coupler by $33\%$ area.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.1
• /
• pp.15-22
• /
• 1991

New design method of small-sized 3-dB $0^{\circ}/180^{\circ}$ ring hybrid and Wilkinson power divider using both lumped elements and distributed elements are presented. At the center frequency of 900 MHz 3-dB $0^{\circ}/180^{\circ}$ ring hybrid and Wikinson power divider are designed and tested. Good agreements are obtained between measured and theoretical modeling results, and at the same time the circuit area is reduced by more than 70% compared with the discributed-type circuits.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.786-790
• /
• 2016

This paper discusses numerically explored orientation effects on the thermal performance of hollow hybrid fin heat sinks (HHFHSs) under natural convection. A HHFHS consists of an array of hollow pin fins concatenated with plate fins and having perforations near the fin bases. Orientation effects on the footprint-based and mass-based thermal performance of the HHFHS were numerically studied for orientation angles ranging from $0^{\circ}$ to $180^{\circ}$. The performance of the HHFHS was compared with that of a pin fin heat sink (PFHS) having similar physical parameters. The results show that the thermal resistance of the HHFHS did not vary considerably from $0^{\circ}$ to $45^{\circ}$. The thermal resistance increased from $45^{\circ}$ to $90^{\circ}$, reached its maximum at $90^{\circ}$, and decreased consistently from $90^{\circ}$ to $180^{\circ}$. Dissimilar behaviors of the thermal resistance of the HHFHS vs. the PFHS resulted mainly from the effect of heat pumping induced by the internal flows of the hollow fins. Despite various orientations, the mass-based thermal resistance of the HHFHS was found to be nearly 30% smaller than that of the PFHS. This result shows the feasibility of the HHFHS for the lightweight thermal management of electronics under natural convection.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.1
• /
• pp.71-79
• /
• 1990

An analog phase shifter is designed at the operating frequency 10GHz that is coupled with a hybrid ring and the network connecting an inductor series with a varactor to extend a continuous chage in the phase of the reflected output wave to be produced from a variation in the terminated varactor reactance as a variation in the reverse bias voltage. It is manufactured in a microstripline in consideration of an effect of the dispersion characteristics and discontinuities. As a resuls of an experiment, a change in the phase is achieved over 180 degree from $52.34^{\circ}$ degrees to $235.01^{\circ}$degrees, the transmission loss is -3.6~-14.3dB, and the return loss is -16~-8dB(1.37

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.15-18
• /
• 2006

We have proposed a broadband analog feedforward optical transmitter using a wideband $180^{\circ}$ hybrid coupler instead of conventional frequency-sensitive phase shifter with the narrow bandwidth property using a wideband $180^{\circ}$ hybrid coupler, the wide-band linearization technique enhances the linearity of the feedforward optical transmitter. In two-tone cases, the $3^{rd}-IMD$ products was enhanced more than 10 dB in 385 MHz range(1.375$\sim$l.76 GHz).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.7 s.98
• /
• pp.753-759
• /
• 2005

In this paper, we have developed a new type of single balanced mixer with the RF MEMS $180^{\circ}$ hybrid coupler using surface micromachining technology. The $180^{\circ}$ hybrid coupler in this mixer is composed of the dielectric-supported air gapped microstriplines(DAMLs) which have signal line with $10{\mu}m$ height to reduce substrate dielectric loss and dielectric posts with size of $20{\mu}m{\times}20{\mu}m$ to elevate the signal line on air with stability At LO power of 7.2 dBm, the conversion loss was 15.5 dB f3r RF frequency or 57 GHz and RF power of -15 dBm. Also, we obtained the good RF to LO isolation of -40 dB at LO frequency of 58 GHz and LO power of 7.2 dBm. The main advantage of this type of mixer is that we are able to reduce the size of the chips due to integrating the MEMS passive components.