• 한국세라믹학회지
• /
• 제31권4호
• /
• pp.389-398
• /
• 1994

Calcium aluminate glasses transmit light at relatively long wavelengths up to 6 ㎛ and exhibit also low Rayleigh scattering values. However they have a tendency to get devitrified easily, which limits their use as routine optical materials. Here, the ternary system CaO-Al2O3-SiO2 glasses with low-silica (<30 mol%) were prepared to prevent the devitrification of CaO-Al2O3 glasses and the properties were investigated as functions of composition. The addition of SiO2 to calcium aluminate glasses promoted their stability, which was due to the decrease of non-bridging oxygens and the reconnection of network. As SiO2 was added, density, refractive index, molar volume of oxygens and thermal expansion coefficient decreased continuously. But the glass transition temperatures with increasing SiO2 contents were raised and then lowered. It was postulated that the anomaly was related to the changes of the middle range order as well as the short range order. As the amount of SiO2 in the glass was increased, the IR cut-off values moved to shorter wavelength owing to 'Si-O' antisymetric stretching vibration. The IR cut-off wavelength of the glasses with 5 and 30 mol% SiO2 was 4.90, 4.55 ㎛, respectively.

• 한국주조공학회지
• /
• 제17권1호
• /
• pp.28-35
• /
• 1997

SiC whisker and $Al_2O_3-SiO_2$ short fiber reinforced AC8A, AC8B and AC8B(J) marix composites were fabricated by squeeze casting method. Preform deformation, change of reinforcement volumefraction and formation of macro-segregation in two composites were investigated by using micro Vickers hardness test, analysis of macro and micro structures with OM, SEM and EDAX. $Al_2O_3-SiO_2$ short fiber preform manufactured with 5% $SiO_2$ binder in this study was considerably deformed and cracked, nevertheless, the short fibers were distributed homogeneously in the composites. In SiC whisker reinforced composites, on the other hand, preform deforming and cracking were not occurred, however, macro segregation zone formed along the infiltration routes by interface reaction during infiltration of molten metal into the preform was observed at center-low area in the composites. The decrease of hardness in the macro segregation zone resulted from the depletion of Si and Mg atoms.

• 한국재료학회지
• /
• 제8권10호
• /
• pp.956-960
• /
• 1998

XPS와 glancing angle XRD, AES 및 AFM을 사용하여 $330^{\circ}C$-$800^{\circ}C$사이의 진공분위기에서 열처리할 때, Co/Nb이중층과 $SiO_2$기판 사이의 계면반응을 조사하였다. $600^{\circ}C$에서 Co와 Nb는 서로 활발하게 확산하여, $700^{\circ}C$이상에서는 두 층사이의 충역전이 완전히 일어났다. 그 때 Nb 중간층과 $SiO_2$기판 사이의 반응에 의하여 계면에 일부 NbO가 형성되었으며, 표면에서는 분위기 중의 산소에 의하여 $Nb_2O_5$가 생성되었다. Nb와 기판간의 반응에 의하여 유리된 Si는 $600^{\circ}C$이상에서 잔류 Co 및 Nb와 반응하여 실리사이드를 형성하였다. Co/Nb 이중층 구조는 $800^{\circ}C$에서 열처리한 후 면저항이 급증하기 시작하였는데, 이것은 Co층이 기판과 바로 접하게 되어 계면에너지를 줄이기 위해 응집되기 때문이다.

• 대한의용생체공학회:의공학회지
• /
• 제25권5호
• /
• pp.383-389
• /
• 2004

본 연구에서는 치과용 티타늄(CP-Ti)과 Ti-25wt%Pd를 인산염계 실리카$.$알루미나 주형재로 주조 후 SEM/EDS, XRD, XPS를 이용하여 주조시 생성되는 표면반응생성물을 조사하였다. Ti-25wt%Pd는 CP-Ti에 비하여 융점이 현저이 감소하여 주조체의 표면반응이 상대적으로 적게 발생하였다. 또한 인산염계 실리카$.$알루미나 주형재를 소성한 결과 주형재는 $SiO_2$, $Al_2$ $O_3$, P$_2$ $O_{5}$, $Mg_3$(P $O_4$)$_2$, AlP $O_4$, $Mg_2$ $SiO_4$, MgAl$_2$ $O_4$의 성분들로 구성되어 있었으며, 표면반응생성물은 CP-Ti 주조체의 경우 $Ti_{5}$Si$_3$ 와 Ti $O_2$로, Ti-25wt%Pd 주조체의 경우 Ti $O_2$ 와 $SiO_{x}$ 로 구성되어 있었다.

• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.424-429
• /
• 2009

물유리로 제조한 알칼리성 실리카-알루미나 합성모액에서 $Na_2O$, $SiO_2$, $H_2O$ 함량이 소달라이트의 결정화도와 입자크기에 미치는 영향을 조사하였다. x=2.5~7.5, y=1.4~3.0, z=140~400 범위에서 한 성분의 함량만 바꾸어 제조한 $x\;Na_2O{\cdot}y\;SiO_2{\cdot}Al_2O_3{\cdot}z\;H_2O$ 조성의 합성모액을 $140^{\circ}C$에서 2일간 수열 반응시켜 소달라이트를 합성하였다. $Na_2O$ 함량이 많아지면 소달라이트의 결정화도가 높아지나 입자는 작아졌다. 합성모액의 $SiO_2/Al_2O_3$ 몰비가 2 근처에서 소달라이트가 생성되었으며, 물의 함량이 달라지면 합성되는 제올라이트의 종류가 달라졌다. 이 합성조건에서는 $SiO_2/Al_2O_3$ 몰비가 2.0 근처이고, $Na_2O$ 함량이 많은 영역에서는 결정화도가 높은 소달라이트가 합성되었으며, 나트륨 이온의 구조유도체로서 효과로 입자 크기는 작아졌다.

• 한국세라믹학회지
• /
• 제28권9호
• /
• pp.661-666
• /
• 1991

Microstructure, room temperature resistivity and temperature coefficient of resistance of BaTiO3 ceramics were studied by varying cooling rates and additives such as TiO2, SiO2 and Al2O3. The basic composition of the BaTiO3 ceramics was formed by adding 0.25 mol% Dy2O3 and 0.07 mol% MnO2 to the BaTiO3 composition. Unlike the additives of SiO2 and Al2O3, an addition of 2 mol% TiO2 to the basic composition was effective to control the grain size of the fired specimens. The room temperature resistivity and the temperature coefficient of resistance for the specimen of this particular compostion were measured as about 102 ohm.cm and 16.5%/$^{\circ}C$, respectively. The observed grain boundary phase of the sample with Al2O3 additive was BaTi3O7, while that of the samples with SiO2 additive was confirmed as BaTiSiO5.

• 한국세라믹학회지
• /
• 제30권3호
• /
• pp.243-249
• /
• 1993

Coated type Al2O3-SiC composite powders were synthesized by surface modification method. Transformation temperature to $\alpha$-Al2O3 of Al2O3 monolith was 115$0^{\circ}C$ whereas increased to 1200, 1250, 130$0^{\circ}C$ with increment of SiC content to 5, 15, 25wt%. Transformation temperature to $\alpha$-Al2O3 was lowered by $\alpha$-Al2O3 seeding. FTIR data analysis and electron micrographs showed that Al2O3 particles were effectively coated on SiC particles.

• E2M - 전기 전자와 첨단 소재
• /
• 제5권3호
• /
• pp.329-336
• /
• 1992

본 논문은 이방성 Sr.페라이트의 자기특성의 개선에 관하여 연구한 것이다. 시편은 SrO.nFe$_{2}$O$_{3}$의 기본조성으로서 비화학양론적 영역인 n=5.9를 택하였다. 그리고 보자력을 증가시키기 위하여 기본첨가제로서 0.7wt% CaCO$_{3}$와 0.3% wt% SiO$_{2}$를 첨가하여 하소시킨 다음 $Na_{2}$SiO$_{3}$의 량을 변화시키면서 복합첨가하였다. 한편, 위의 시료(기본첨가제와 0.5wt% $Na_{2}$SiO$_{3}$)에 Cr$_{2}$O$_{3}$ 및 $Al_{2}$O$_{3}$를 단독 및 복합첨가한 결과, 0.5wt% $Al_{2}$O$_{3}$가 단독첨가되었을 경우, 좋은 자기특성을 나타내었다. 본 연구에서 시행한 복합첨가방식에 의한 Sr.페라이트의 자기특성의 조사를 통하여 등방성의 경우, 기본조성과 기본첨가제와 0.5wt% $Na_{2}$SiO$_{3}$와 0.5wt% $Al_{2}$O$_{3}$조성에서 (BH)$_{max}$=1.15MGOe, 그리고 이방성의 경우, (BH)$_{max}$=3.23MGOe를 얻었으며 시료를 이방성화하므로서 자기특성면에서 등방성인 경우의 2~3배의 개선효과를 얻었다. 그리고 소결온도는 1210.deg.C에서 가장 좋은 특성을 나타내었으며 큐리온도는 등방성의 경우 T$_{c}$=410~420.deg.C에서 이방성의 경우 T$_{c}$=439~445.deg.C로서 약 30.deg.C가 향상되었다.

• 한국세라믹학회지
• /
• 제30권11호
• /
• pp.897-904
• /
• 1993

CdS doped SiO2 glass coating films which are good candidates for the nonlinear optical materials were prepared by the Sol-Gel method. TEOS, C2H5OH, H2O and HCl were used as starting materials to obtain SiO2 matrix solutions. Then Cd(NO3)2.2H2O and CS(NH2)2 were dissolved into the SiO2 matrix solutions. Coating was performed several times in order to increase the thickness of coated film by the dip-coating method. Then heat treatments were carried out to control the size of CdS microcrystals doped in SiO2 glass matrix with respect to temperatures and times. CdS-doped SiO2 transparent coating films were successfully obtained. CdS crystals were changed from cubic to hexagonal type about $600^{\circ}C$.

• 한국결정성장학회지
• /
• 제6권2호
• /
• pp.275-285
• /
• 1996

The effect of heat-treatment on catalytic crystallization in $LI_2O-Al_2O_3-SiO_2$ glass system over its glass transition temperature was investigated. Glass composition $4Li_2O{cdot}22AL_2O_3{cdot}66SiO_2{cdot}2TiO_2{cdot}2.5ZrO_2{cdot}1.5P_2O_5{cdot}1.0Na_2O{cdot}1.0As_2O_3$ (wt%) was selected and heat-treated at different heating conditions to obtain transparent glass-ceramic. Nucleation and crystallization behaviour of this composition were estimated by differential thermal analysis (DTA) and X-ray diffractometer (XRD) and its thermal expansion coefficients were measured by Dilatometer. As a result, glass transition temperature was $730^{\circ}C$ and two maximum nucleation temperatures were estimated at $730^{\circ}C$ and 82$0^{\circ}C$ using JMA(Johson-Mehl-Avrami) equation by DTA. $ZrTiO_4$ $\beta$-Quartz solid solution and $\beta$-Spodumene crystals were identified by XRD. The optimum crystallization temperature was 92$0^{\circ}C$ and three step heating schedule was expected to be useful to obtain transparent glass-ceramic.