• Journal of the Korean Ceramic Society
• /
• v.26 no.6
• /
• pp.755-762
• /
• 1989

A pyroelectric ceramic material based on Pb(Sn1/2Sb1/2)O3 modified PZT system is studied as a function of the amount of Pb(Sn1/2Sb1/2)O3 and PbTiO3. With increasing the Pb(Sn1/2Sb1/2)O3 amount the dielectric constant increases up to 10mol% and then decreases, but the pyroelectric coefficient decreases and as the PbTiO3 contents increase in the 10mol% added PZT system, the dielectric constant increases but the infrared sensitivity decreases. The good pyroelectric material has low dielectric constant and no pyrochlore phase, but does not depend in the amount of remanent dipole, and its composition sites around ferroelectric-to-antiferroelectric phase boundary.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.12
• /
• pp.942-948
• /
• 2010

In this study we aims to examine the effects of 0.5 mol% $Cr_2O_3$ addition on the reaction, microstructure development, resultant electrical properties, and especially the bulk trap and interface state levels of ZnO-$Bi_2O_3-Sb_2O_3$ (Sb/Bi=0.5, 1.0, and 2.0) systems (ZBS). The samples were prepared by conventional ceramic process, and characterized by XRD, density, SEM, I-V, impedance and modulus spectroscopy (IS & MS) measurement. The sintering and electrical properties of Cr-doped ZBS (ZBSCr) systems were controlled by Sb/Bi ratio. Pyrochlore ($Zn_2Bi_3Sb_3O_{14}$) was decomposed more than $100^{\circ}C$ lowered on heating in ZBS (Sb/Bi=1.0) by Cr doping. The densification of ZBSCr (Sb/Bi=0.5) system was retarded to $800^{\circ}C$ by unknown Bi-rich phase produced at $700^{\circ}C$. Pyrochlore on cooling was reproduced in all systems. And $Zn_7Sb_2O_{12}$ spinel ($\alpha$-polymorph) and $\delta-Bi_2O_3$ phase were formed by Cr doping. In ZBSCr, the varistor characteristics were not improved drastically (non-linear coefficient $\alpha$ = 7~12) and independent on microstructure according to Sb/Bi ratio. Doping of $Cr_2O_3$ to ZBS seemed to form $Zn_i^{..}$(0.16 eV) and $V^{\bullet}_o$ (0.33 eV) as dominant defects. From IS & MS, especially the grain boundaries of Sb/Bi=0.5 systems were divided into two types, i.e. sensitive to oxygen and thus electrically active one (1.1 eV) and electrically inactive intergranular one (0.95 eV) with temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.8
• /
• pp.738-748
• /
• 2008

In this study, it has been investigated on the changing behavior of electrical properties in $ZnO-Bi_2O_3-Sb_2O_3$ (Sb/Bi=2.0, 1.0 and 0.5) ceramics. The samples were prepared by conventional ceramic process, and then characterized by I-V, C-V curve plots, impedance and modulus spectroscopy (IS & MS) measurement. The electrical properties of ZBS systems were strongly dependent on Sb/Bi. In ZBS systems, the varistor characteristics were deteriorated noticeably with increasing Sb/Bi and the donor density and interface state density were increased with increasing Sb/Bi. On the other hand, we observed that the grain boundary reacted actively with the ambient oxygen according to Sb/Bi ratio. Especially the grain boundaries of Sb/Bi=0.5 systems were divided into two types, i.e. sensitive to oxygen and thus electrically active one and electrically inactive intergranular one with temperature. Besides, the increased pyrochlore and $\beta$-spinel phase with Sb/Bi ratio caused the distributional inhomogeneity in the grain boundary barrier height and the temperature instability. To the contrary, the grain boundary layer was relatively homogeneous and more stable to temperature change and kept the system highly nonlinear at high Bi-rich phase contents.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.3
• /
• pp.433-438
• /
• 1987

The current-voltage characteristics of the ZnO varisor with and without Sb2O3 which were fabricated with the various calcination and sintering temperature were discussed by comparing the results of SEM-microstructures and X-ray diffraction analysis. The samples were calcined at the temperature up to 800\ulcorner for 2 hours and they were sintered at 1200-1300\ulcorner for 1 hour. Then, we applied the power up to dc 200 volt to the samples and measured the output current up to 100mA. The samples without Sb2O3 had lower nonlinear resistances at the all calcination and sintering temperatures due to the large grains because of not forming Spinel phase. The other samples contained Sb2O3 could form Pyrochlore and Spinel phases at the all calcination temperatures by X-ray diffraction phase analysis. We found that the Spinel phases which were formed at the calcination process inhibit growth of ZnO grain and give rise to the change of nonlinear resistances by SEM-microstructures. And we found that the base of ZnO grain growth control is strongly dependent on the behavior of Sb2O3 in calcination process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.185-189
• /
• 2000

ZnO varistor has many merits as compared with SiC varistor. But, because of leakage current and non-linear coefficient, it has unstable function properties. For the purpose of improvement of ZnO varistor properties, ZnO varistor is studied according to sintering condition and mixing condition. ZnO varistor, $ZnO-Bi_2O_2-Y_2O_3-MnO-Cr_2O_3-Sb_2O_3$ series, is fabricated with $Sb_2O_3$ mol ratio(0.5-4[mol%]) and sintered at $1250[^{\circ}C]$ In accordance with $Sb_2O_3$ mol ratio and sintering temperature, grain size and non-linear coefficient are measured. The specimen, $Sb_2O_3$ mol ratio is 1[mol%], has small grain size. It has best properties because of its liquid phase shape. When $Sb_2O_3$ mol ratio is 1[mol%], grain size is decreased.

• Resources Recycling
• /
• v.21 no.4
• /
• pp.53-59
• /
• 2012

In this study, behaviors of removing Sb and Pb by oxidation of molten Bi-Pb-Sb alloy which is a by-product of non-ferrous smelting process was investigated. The molten alloy was oxidized at 1173 K by bubbling $N_2+O_2$ gas through a submerged nozzle. The Sb was removed and recovered as mixed phase of $Sb_2O_3$ and metal Sb. In the case of bubbling $N_2+O_2$ gas into molten Bi-Pb alloy at 923 K, Pb was oxidized and removed to slag. But Bi could not be refined due to simultaneous oxidization of Bi with Pb.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.2
• /
• pp.115-118
• /
• 1994

Samples of ($Bi_{2-x}Sb_x)PbSr_2Ca_2Cu_3O_y$, compositions with x=0.0, 0.1, and 0.2 were prepared by solid-state reaction. The solubility of Sb into the 2223 phase is lower than 0.05 for the ratio of Sb/Bi. The lack of stability of the Sb-substituted $Bi_2O_2$ double layers is likely to cause the solubility low. There is no great dependence of lattice parameters on the Sb-content, and bonds around the square-pyramidal Cu atom are not affected by the $Sb^{3+}$ ion substituted. The superconducting transition temperature of this system is decreased gradually with increase of Sb, which is tentatively attributable to the perturbation of the Bi 6p-O 2p band and/or to the low volume fraction of the 2223 phase.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.190-190
• /
• 2003

여러원소 (Sb, F 등)를 도핑한 SnO$_2$ 투명전도막은 여러 가지 훌륭한 특성으로 Solar cell, heat mirrors, gas sensors, liquid crystal displays, thick film resistor 등과 같이 넓은 범위에서 응용되고 있다. 본 연구에서는 Sb 도핑된 Tin Oxide films이 Sol-gel dip coating법에 의해 준비되었다. SnO$_2$:Sb 용액은 SnC1$_2$ 와 SbC1$_3$ Power를 알코올에 용해하여 Ethylene glycol 와 Citric acid를 첨가하여 합성하였다. 막의 상형성은 XRD와 SEM(Scanning electron microscope)에 의해서 분석되었으며, 특성분석은 투과율(UV/VIS Spectrophotometer)과 표면전기저항(four point probe)으로 분석되었다. SiO$_2$ barrier이 SnO$_2$:Sb 막의 특성에 미치는 영향을 확인하기 위하여 XPS(X-ray photoelectron spectroscopy) 분석이 적용되었다.

• Journal of the Korean Ceramic Society
• /
• v.21 no.2
• /
• pp.121-126
• /
• 1984

The dielectric properties of $BaTiO_3$ containing 0~0.3mol% and ZnO respectively as additives were investigated as a function of temperature from $25^{\circ}C$ to 14$0^{\circ}C$ and frequency from 24 KHz to 15MHz. The density of sintered $BaTiO_3$ was increased with addition of increasing to 0.15mol% amounts of $Sb_2O_3$ and the dielectric constant was also increased. This is due to space charge polarization with Ba vacancies. Above 0.15mol% $Sb_2O_3$ the density was decreased and the dielectric constant was also decreased due to occuring the discharge through voids. The density of sintered $BaTiO_3$ was decreased with addition of increasing to 0.15mol% amounts of ZnO and the dielectric constant was decreased due to occuring the discharge through voids. Above 0.15mol% ZnO the density was increased and the dielectric constant was also increased.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.1
• /
• pp.1-3
• /
• 1987

The crystal structure of $K_5Na_2[SbW_6O_{24}]{\cdot}12H_2O$ has been determined. Final R = 0.081 for 890 observed independent reflections collected by diffractometry. Crystal data as follows; trigonal, space group R3m, a = 9.794(1) ${\AA},\;{\alpha}$ = 84.72$(1)^{\circ}$, Z = 1. The heteropolyanion has a structure with point symmetry $D_{3d}$ (3m), of the ideal Anderson-type heteropolyanion. The Sb-W and W-W distances are 3.259(2) and 3.259(3) ${\AA}$. Three types of W-O ($W-O_t,\;W-O_b\;and\;W-O_c$) distances are 1.73(2), 1.95(4) and 2.20(3) ${\AA}$. The Sb-O distance is 1.97(3) ${\AA}$.