• 한국수자원학회논문집
• /
• 제42권8호
• /
• pp.619-629
• /
• 2009

본 연구는 하상마찰의 척도인 등가조고를 이용하여 자갈하천의 하상저항을 산정하는 것이다. 이를 위하여 국내 8개 자갈하천에서 실측을 통하여 마찰계수 f를 산정하였고, 하상재료의 누가입경분포를 조사하였으며, 각 단면의 실측 마찰계수를 나타내기 위하여 대수 연직유속분포를 가정하여 계산된 평균 등가조고와 누가입경분포를 이용하여 계산된 구간 등가조고를 비교하였다. 더불어 등가조고를 사용하여 계산된 Manning 계수를 Strickler 유형의 기존 경험식에 의한 Manning 계수와 비교함으로써, 국내 자갈하천에서 기존 경험식을 이용한 하상저항 산정의 적용성을 검토하였다. 분석결과, 구간 등가조고가 대상구간의 하상특성을 대표할 수 있음을 확인하였고, 구간 등가조고로 계산된 Manning 계수가 실측 자료로부터 계산된 Manning 계수와 비교하여 RMS 오차가 0.003이하로 계산되어 실무 적용에 타당할 것으로 판된되었다. 또한 실제 하천에서 등가조고 $k_s$와 특정입경 $D_i$과의 비례계수 사이의 상관성이 적은 것으로 나타나, 하상 특정입경을 사용하여 Manning 계수를 산정하는 기존 경험식을 적용할 때 적절한 방정식의 선택에 어려움이 있을 것으로 판단된다.

• Korean Journal of Radiology
• /
• 제23권4호
• /
• pp.466-478
• /
• 2022

Objective: ¹⁸F-fluorodeoxyglucose (FDG) PET/CT is often used for detecting malignancy in patients with newly diagnosed hemophagocytic lymphohistiocytosis (HLH), with acceptable sensitivity but relatively low specificity. The aim of this study was to improve the diagnostic ability of ¹⁸F-FDG PET/CT in identifying malignancy in patients with HLH by combining ¹⁸F-FDG PET/CT and clinical parameters. Materials and Methods: Ninety-seven patients (age ≥ 14 years) with secondary HLH were retrospectively reviewed and divided into the derivation (n = 71) and validation (n = 26) cohorts according to admission time. In the derivation cohort, 22 patients had malignancy-associated HLH (M-HLH) and 49 patients had non-malignancy-associated HLH (NM-HLH). Data on pretreatment ¹⁸F-FDG PET/CT and laboratory results were collected. The variables were analyzed using the Mann-Whitney U test or Pearson's chi-square test, and a nomogram for predicting M-HLH was constructed using multivariable binary logistic regression. The predictors were also ranked using decision-tree analysis. The nomogram and decision tree were validated in the validation cohort (10 patients with M-HLH and 16 patients with NM-HLH). Results: The ratio of the maximal standardized uptake value (SUVmax) of the lymph nodes to that of the mediastinum, the ratio of the SUVmax of bone lesions or bone marrow to that of the mediastinum, and age were selected for constructing the model. The nomogram showed good performance in predicting M-HLH in the validation cohort, with an area under the receiver operating characteristic curve of 0.875 (95% confidence interval, 0.686-0.971). At an appropriate cutoff value, the sensitivity and specificity for identifying M-HLH were 90% (9/10) and 68.8% (11/16), respectively. The decision tree integrating the same variables showed 70% (7/10) sensitivity and 93.8% (15/16) specificity for identifying M-HLH. In comparison, visual analysis of ¹⁸F-FDG PET/CT images demonstrated 100% (10/10) sensitivity and 12.5% (2/16) specificity. Conclusion: ¹⁸F-FDG PET/CT may be a practical technique for identifying M-HLH. The model constructed using ¹⁸F-FDG PET/CT features and age was able to detect malignancy with better accuracy than visual analysis of ¹⁸F-FDG PET/CT images.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.502-510
• /
• 2018

In order to accumulate data to lower the friction coefficient of a press mold, tribological tests were performed before and after coating SM45C with a PVC/PO film and plasma coating (CrN, concept). The ultrasonic nanocrystal surface modification (UNSM)-treated material had a nano-size surface texture, high surface hardness, and large and deep compressive residual stress formation. Even when the load was doubled, the small amount of abrasion, small weight of the abrasion, and width and depth of the abrasion did not increase as much as those of untreated materials. A comparison of the weight change before and after the tribological test with the CrN and the concept coating material and that of the untreated material showed that the wear loss of the concept coating material and P-UNSM treated material (that is, the UNSM treated material treated with the concept coating) showed a tendency to decrease by approximately 55-75%. Concept 100N had a lower friction coefficient of about 0.6, and P-UNSM-30-100N showed almost the same curve as concept 100N and had a low coefficient of friction of about 0.6. The concept multilayer coating had a thickness of $5.32{\mu}m$. In the beginning, the coefficient of friction decreased because of the plasma coating, but it started to increase from about 250-300 s. After about 350 s, the coefficient of friction tended to approach the friction coefficient of the SM45C base metal. The SGV-280F film-attached test specimen was slightly pushed back and forth, but the SM45C base material was not exposed due to abrasion. The friction coefficient was 0.22, which was the lowest, and the tribological property was the best in this study.

• 한국산림과학회지
• /
• 제83권2호
• /
• pp.164-174
• /
• 1994

장기간의 수분 및 양료 stress를 받는 다섯 가지 주요 수종의 생리적인 대사 반응을 알아보기 위하여 상이한 토양수분 및 양료 조건의 pot에서 기른 실생묘의 시기적인 생육, 엽록소 함량 및 수분특성의 변화를 조사하였다. 이를 위해 상수리나무, 굴참나무, 신갈나무, 졸참나무 및 물푸레나무 실생묘를 내경 16cm, 깊이 16cm의 프라스틱 용기에 번식시켰다. 이들 묘목은 5월~9월까지 비닐 온실 내에서 건, 습 두가지 토양수분 조건 및 N+P+K 시비, 무시비의 두가지 시비 조건으로 조합 처리하였다. 환경 stress에 대한 반응을 분석하기 위해 5월, 7월, 9월에 묘고, 근원경, 엽록소 함량, P-V curve 모수들을 반복하여 측정했다. 수분 및 양료 부족에 따른 환경 stress는 묘목의 생육에 있어 수종, 생육시기 및 묘고와 근원경 간에 각기 다른 영향을 미쳤다. 상수리나무의 생육은 stress에 보다 예민하게 반응하여 감퇴되었지만 신갈나무는 나머지 수종에 비해 stress에 의한 생육부진 영향이 적었다. 엽록소의 함량은 생육기간 중 일반적으로 물푸레나무에 비해 참나무류에서 더 높은 값을 보였다. 엽록소 중 chlorophyll a의 함량은 0.14~1.96mg/g dry wt., chlorophyll b는 0.16~1.79mg/g dry wt. 내에서 생육기간 중 수종 및 처리 별로 변화했다. 그러나 엽록소 함량은 지속적인 환경 stress와 잎의 노화에 따라 점차 감소되었다. 최대포수상태와 위조점에서의 osmotic potential(${\Psi}{{\pi}o}$, (${\Psi}{{\pi}p}$)은 일부 예외는 있지만 각각 5월의 -7.0~-12.4bars에서 9월의 -10.2~-17.5bars로 3~5bars까지, 또한 5월의 -7.6~-14.2bars에서 9월의 -12.9~-20.4bars로 5~6bars까지 시간이 지나면서 감소했다. ${\Psi}{{\pi}p}$의 값은 일반적으로 5월 및 7월에 물푸레나무에서 높았으나 9월에는 졸참나무에서 높은 값을 보였다. 위조점에서의 상대수분함량 (RWCp)은 일반적으로 물푸레나무에서 높았지만 그 값의 시기적인 변화는 수종이나 처리 조건에 따라 상당한 차이를 보였다.

• 한국안전학회지
• /
• 제10권1호
• /
• pp.56-63
• /
• 1995

Two methods of the numerical method of CPQRA(Chemical Process Quantitative Risk Analysis) and the manual method of IAEA(International Atomic Energy Agency) were used to estimate the individual risk and societal risk around the chemical plant. Where, the CPQRA is introduced to verify the theoritical background of the manual of international atomic energy agency. The Gaussian plume model which has a weather stability class D with velocity of 5m/s was applied to calculate dispersion of hazard material. Also, 8-point method was employed to the effects of accidents for wind distribution. Furthermore, historical record, FTA(Fault Tree Analysis) and ETA(Event Tree Analysis) were used to estimate the probability or frequency of accidents. Eventually, the individual risk shows isorisk contour and the societal risk shows F-N curve around hazard facility, especially in chemical plants. Caulculated results, which both individual and societal risk, by using IAEA manual show simillar results to those of calculation by numerical method of CPQRA.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
• /
• pp.151-153
• /
• 2002

Using UPFC(Unified Power Flow Controlled), it is possible to control three parameters(voltage, impedance, and phase angle). The UPFC can generate or absorb reactive power rapidly so as to enhance the transient and voltage stability and also influence the power flow. In this paper, the effects of application of the UPFC to the power system are analyzed from a viewpoint of improving the total transfer capability by enhancing voltage stability. The IPLAN, which is a high level language used with PSS/E program, is employed for evaluating the total transfer capability from a f-V curve.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.29-33
• /
• 2002

A procedure of free span and fatigue analysis of offshore pipelines was made per DNV-RP-F105, 2002. The new method includes the axial force and deflection load in pipelines. The screening criteria were used to calculate the allowable span lengths. The screening criteria allow small amplitudes of vortex-induced vibration due to wave and current loading. However, the induced pipe stress is very small and usually below the limit stress of a typical S-N curve. A simplified method was established to calculate the fatigue damage due to long-term current distribution. The long-term current statistics was assumed with a 3-parameter Weibull distribution. The fatigue damage was estimated for the span lengths obtained from the screening criteria for various conditions. Sample calculations show the effect of axial force for various boundary conditions.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권1호
• /
• pp.59-67
• /
• 2002

The comparison of $J_{Rice}$-resistance considering a few strength ratio in Rice J-integral formula and $J_{\delta}$-resistance curves converted from experimental CTOD using appropriate strength chosen according to strain hardening level, n=10.6 (A533B steel) and n=8.1 (BS4360 steel) is carried out. The optimal dimensionless strength ratio like the factor of revision, (see full text)reflecting strain hardening level in Rice\`s experimental formula is found out and the reliability of appropriate reference strength chosen according to strain hardening level in different materials is investigated through doing that CTOD is transformed from $J_{\delta}$-integral using relationship between J-integral and CTOD. The results are as follows; 1) The optimal factor of revision is when m equals to 3 in (see full text) for Rice's and the above optimal factor of revision multiplies by coefficient, η in Rice's experimental formula instead of n=2, 2) and the pertinent reference strength for high strain hardening material like BS4360 steel is ultimate strength, $\sigma_{u}$ and for material like A533B steel is ultimate-flow strength, $\sigma_{u-f}$. The incompatible of the behavior of both experimental J-resistance curves using Rice's formula and CTOD-resistance curves for A533B and BS4360 steel by Gordon, et al., could be corrected using the optimal factor of revision in Rice\`s and the pertinent reference strength in J=$m_{j}$${\times}$$\sigma_{i}$${\times}$CTOD.

• 대한의생명과학회지
• /
• 제24권4호
• /
• pp.418-425
• /
• 2018

Amyloid brain positron emission tomography (PET) images are visually and subjectively analyzed by the physician with a lot of time and effort to determine the ${\beta}$-Amyloid ($A{\beta}$) deposition. We designed a convolutional neural network (CNN) model that predicts the $A{\beta}$-positive and $A{\beta}$-negative status. We performed 18F-florbetaben (FBB) brain PET on controls and patients (n=176) with mild cognitive impairment and Alzheimer's Disease (AD). We classified brain PET images visually as per the on the brain amyloid plaque load score. We designed the visual geometry group (VGG16) model for the visual assessment of slice-based samples. To evaluate only the gray matter and not the white matter, gray matter masking (GMM) was applied to the slice-based standard samples. All the performance metrics were higher with GMM than without GMM (accuracy 92.39 vs. 89.60, sensitivity 87.93 vs. 85.76, and specificity 98.94 vs. 95.32). For the patient-based standard, all the performance metrics were almost the same (accuracy 89.78 vs. 89.21), lower (sensitivity 93.97 vs. 99.14), and higher (specificity 81.67 vs. 70.00). The area under curve with the VGG16 model that observed the gray matter region only was slightly higher than the model that observed the whole brain for both slice-based and patient-based decision processes. Amyloid brain PET images can be appropriately analyzed using the CNN model for predicting the $A{\beta}$-positive and $A{\beta}$-negative status.

• Journal of Oral Medicine and Pain
• /
• 제25권4호
• /
• pp.345-353
• /
• 2000

This study was to investigate normal salivary flow rates and normal indices of Quantitative analysis of salivary scintigraphy. 96 adult volunteers were studied by Questionnaire evaluating salivary conditions and clinical examinations. 35(male 23, female 12, age range 23-31years) that absented subjective and objective symptoms related saliva were classified as normal group. The normal group underwent measurement unstimulated and stimulated salivary flow rates and salivary scintigraphy. The obtained results were as follows: 1. There were not significant in sex differences of unstimulated and stimulated salivary flow rates. The unstimulated salivary flow rate was $0.66{\pm}0.41g/min$, stimulated salivary flow rates was $1.61{\pm}0.69g/min$. 2. As comparing of parameters of salivary scintigraphy, the Uptake ratio(UR), $T_{max}$, $T_{min}$, Maximum accumulation (MA), Maximum secretion(MS) of parotid and submandibular glands were not significant in sex and side-ralated differences. 3. The UR, $T_{max}$, MA, MS of parotid gland were significantly higher than those of submandibular gland; in the parotid gland, UR, $3.67{\pm}0.88$, $T_{max}$, $18.77{\pm}0.43min$, MA, $41.35{\pm}9.22%$, MS, $43.13{\pm}9.13%$; in the submandibular gland, UR, $3.04{\pm}0.10$, $T_{max}$, $18.48{\pm}0.52min$, MA, $36.47{\pm}14.18%$, MS, $36.88{\pm}12.20%$. 4. As classifying of time-activity curve, the most of parotid gland was N-type(97.1%), submandibular gland was observed in order of M-type(67.1%), N-type(21.4%), F-type(11.4%), however, was not observed S-type. 5. As the type of time-activity curve of submandibular gland was more flattened, the UR, $T_{max}$, MA, MS were significantly decresed.