• Tuberculosis and Respiratory Diseases
• /
• v.52 no.4
• /
• pp.395-404
• /
• 2002

Background : Surfactant protein A (SP-A) is important for regulating surfactant secretion, synthesis and recycling. However, It's regulation in vivo is unclear. SP-A has important roles in regulating surfactant metabolism as well as determining its physical properties. Glucocorticoid accelerates the morphologic differentiation of epithelial cells into type II cells and increase the rate of phosphatidylcholine synthesis. Methods : The authors investigated the effects of glucocorticoid on the accumulation of mRNA encoding SP-A and SP-A protein content. Adult rats were given various doses of subcutaneous dexamethasone and sacrificed after 24 hours and one week. SP-A mRNA was measured using a filter hybridization method. The lung SP-A protein content was determined using a double sandwich ELISA assay with polyclonal antiserum raised in rabbits against purified rat SP-A. Results : 1) The accumulation of SP-A mRNA in the dexamethasone treated group 24 hours after 0.2 mg/kg dexamethasone treatment was increased 38.8% compared to the control group. 2) The accumulation of SP-A mRNA in the dexamethasone treated group 1 week after 2 mg/kg dexamethasone treatment was 49.7% higher than the control group(P<0.01). 3) The total lung SP-A level was not altered after 24 hours by the 0.2mg/kg treatment. The total lung SP-A content one week after 2mg/kg dexamethasone administration was 373.7% higher than the control group(P<0.005). Conclusion : Dexamethasone treatment results in an increase in the SP-A mRNA and SP-A protein levels, suggesting that the pretranslational events in vivo may in part contribute to this process.

• Korean Journal of Poultry Science
• /
• v.36 no.2
• /
• pp.103-110
• /
• 2009

This experiment was conducted using 350 Lohmann Brown layers (67 weeks of age) to evaluate the dietary effect of organic or inorganic Se and Cu on their contents in chicken eggs. The layers were divided into seven groups and fed a commercial diet or one of the six experimental diets containing different levels of Se and Cu (T1, 0.3ppm organic Se; T2, 1.0ppm organic Se; T3, 1.0ppm inorganic Se; T4, 125ppm organic Cu; T5, 250ppm organic Cu; and T6, 250ppm inorganic Cu) for 5 weeks. No significant differences were observed in egg production and its qualities among groups. The contents of blood cholesterol in the birds fed various levels of Se and Cu were not significantly different as compared to control. Se contents in eggs were linearly increased as dietary Se levels increased for both sources, but Se contents from the groups fed organic Se were slightly higher than those fed inorganic Se. Sensory characteristics of eggs were not influenced by dietary treatments. In conclusion, Se contents in eggs were linearly increased as dietary levels of organic or inorganic Se increased, but eggs in layers fed the diet containing organic Se did not show higher Se contents than those in birds fed dietary inorganic Se.

• Economic and Environmental Geology
• /
• v.30 no.6
• /
• pp.553-566
• /
• 1997

Origin, behavior and enrichment of environmental toxic elements from the Deokpyeong area were investigated on the basis of major, trace and rare earth element geochemistry. Coaly metapelites of the Deokpyeong area are subdivided into grey phyllite, dark grey phyllite, coaly slate and black slate, which are interbedded along the Ogcheon Supergroup. The coaly slate had been mined for coal, but mining is closed. The coaly and black slates are lower contents of $SiO_2$ and $Al_2O_3$, and higher contents of LOI, CaO, $Na_2O$ and BaO as compared with the phyllitic rocks. Rare earth elements are highly enriched in the coaly and black slate. Average compositions (ppm) of minor and/or environmental toxic elements in the coaly and black slate are revealed as As=127, Ba=30,163, Cd=18, Cr=740, Cu=84, Mo=378, Pb=43, Sb=12, Se=44, U=144, V=8,147 and Zn=292, which are extremely high concentrations than those in the NASC compositions. Major elements (average enrichment index; 5.34) in the coaly metapelites are mostly depleted, excepting $P_2O_5$ and BaO, normalized by NASC. Rare earth elements (average enrichment index; 1.48) are enriched in the coaly slate. On the basis of NASC, minor and/or environmental toxic elements in the coaly metapelites were strongly enriched of all the elements with the exception of Co, Cs, Ni and Sr. Average enrichment index of trace elements in coaly metapelite is 31.51 (coaly slate; 51.94 and black slate; 15.46). Especially, enrichment index of potentially toxic elements (As, Ba, Cr, Cu, Mo, Ni, Sb, Se, U, V and Zn) of the rock is 46.10 (grey phyllite; 7.15, dark grey phyllite; 4.77, coaly slate; 88.96 and black slate; 22.11). These coal formations were deposited in basin of boundary between terrestrial and marine environments deduced to carbon, sulfur (C/S=2.2 to 275.7), trace and rare earth elements characteristics. Irregular behavior and dispersion between major, minor and rare earth elements of those metapelites indicates a variable source materials, incomplete mixing of differential source and/or reequilibrium of diagenesis and metamorphism.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.2
• /
• pp.266-276
• /
• 1996

Numerous factors are known to affect the accuracy of elastomeric impression materials. Factor often overlooked is the quality of the bond between putty and wash during corrective reline impression technique. The putty-wash bond strength must be strong enough to over-come the local stress at putty-wash interface. It is not always possible to avoid saliva contamination in making corrective wash impres-sion. And putty preliminary impression material con be used as a template for provisional restoration. Human saliva and the residual monomer of autopolymerizing acrylic resin are thought to affect the bond strength and the failure type. This study examined the effect of contaminants like human saliva, and residual resin monomer on the putty-wash bond strength and the effectiveness of treatment. 1. Of the tested three brands of Vinyl Polysiloxane impession meterial, Express Exhibited the greatest bond strength followed by Eamix and Perfect showed the lowest putty-wah bond strength. 2. Coating the putty substrates with human saliva did not produce decreased failure load in all the breands of Vinyl Polysiloxane impression meterail. 3. Of the three brands of VPS impression material that were exposed to methhylmethacry-late resin(Jet), only the putty-wash bond strength of the Perfect group diminished signifi-cantly. Moreover, all the specimens from group C of Perfect exhibited adhesive failure. 4. Exposing the substrates to ethylmethacrylate resin(SNAP. diminished the putty-wash bond strength significantly. With Perfect and Examix, failure occurred cohesively through the light-body, whereas with Express, failure occurred adhesive-cohesively. 5. Removing approximately 1mm thickness of the contaminated putty interface was the most effective treatment in countering the undesirable effect caused by residual resin monomer. The putty-wash bond strength of the groups that were treated with 1mm even putty reduction was not significantly different from those of control groups. With Perfect and Examix, cleaning the specimens with gauze soaked in 70% isopropyl alcohol increased the putty-wash bond strength, but was not as effective as 1mm even reduction of contaminated putty substrates. With Express, 70% isoproryl alcohol treatment exhibi0ted comparable putty-wash bond strength to that of control group.

• Journal of the Korean Vacuum Society
• /
• v.16 no.2
• /
• pp.153-159
• /
• 2007

In-cryostat helium lines are under installation to transfer a cryogenic helium into cold components in KSTAR device. In KSTAR, three kinds of helium should be supplied into the cold components, which are supercritical helium Into superconduction(SC) magnet system, liquid helium into current lead system, and gas helium into thermal shields. Cryogenic helium lines consist of transfer lines outside the cryostat, in-cryostat helium lines, and electrical breaks. In-cryostat helium lines should be guaranteed of leak tightness for tong time operation at high internal helium pressure of 20 bar. We wrapped the helium line with multi-layer insulator(MLI) to reduce radiation heat and insulated the surface of the high potential part with prepreg tape. The electrical break was fabricated by brazing ceramic tube with stainless steel tube. To ensure the operation reliability at operation temperature, all the electrical break have been examined by the thermal cycle test at liquid nitrogen and by the hydraulic test at 30 bar. And additional surface insulation was prepared with prepreg tape to give structural safety. At present most of the in-cryostat helium lines have been installed and the final inspection test is progressing.

• YAKHAK HOEJI
• /
• v.53 no.5
• /
• pp.293-297
• /
• 2009

The abuse of methamphetamine (MA) is one of the most serious drug abuses in Asia. And, the prevention of precursor production for abuse drug is one of the most effective drug control system. Isotope ratio analysis at natural abundance levels have been used to establish the environmental source or the geographic origin of various biological and nonbiological materials. Ephedrine, the precursor of MA, is produced by one of three methods; extraction from Ephedra plants, full chemical synthesis or via a semi-synthetic process involving the fermentation of sugar, followed by amination. We investigated the origin of ephedrine and pseudoephedrine based on the carbon and nitrogen values for nineteen pharmaceutical powder materials (PPMs) obtained from pharmaceutical company in Korea by stable isotope ratio mass spectrometry coupled to an elemental analyser (EA-IRMS). The carbon delta values for the ephedrine and pseudoephedrine were -24.21~-22.72 (mean=-23.72) $^{\cir}/_{\circ\circ}$ and -23.79~-22.71 (mean=-23.48) $^{\cir}/_{\circ\circ}$. The nitrogen delta values were 3.51~5.55 (4.43) $^{\cir}/_{\circ\circ}$ and 2.24~8.22 (5.42) $^{\cir}/_{\circ\circ}$. These results indicate that PPMs are semi-synthetic products. Therefore the origins of ephedrine(natural, semi-synthetic or synthetic) could be discriminated by using carbon and nitrogen stable isotope ratios. we are sure tat this stable isotope ratio analysis can discriminate the origins of precursors of methamphetamine.

• The Korean Journal of Mycology
• /
• v.15 no.2
• /
• pp.80-86
• /
• 1987

The author isolated high cellulolytic fungi from natural sources and determined optimal condition of protoplast formation and fusion as fundamental step for improvement of the isolated it's cellulolytic ability. Three different cellulolytic fungi, such as Aspergillus sp., Penicillium sp. and Trichoderma sp., were isolated from soil. Their cellulolytic activities were compared with that of Aspergillus niger which was useful industrially and had cellulase activity. It was Aspergillus sp. that showed the highest activity of all these four fungi. And then it was followed by Penicillium sp., Trichoderma sp., and Aspergillus niger in order. An auxotrophic mutant of Aspergillus sp. was obtained by UV mutagenesis method. Having try to produce protoplast from mycelia, the author found that ${\beta}-glucuronidase$, at pH 6.0, was effective cell-wall lytic enzyme. And the optimal concentration of this enzyme was 5,000 unit/ml. Regeneration rates of wild type, met. auxotroph and arg. auxotroph, in presence of osmotic stabilizer, were 7. 0%, 7. 5% and 5.2%, respectively. PEG with M.W. 6,000 was effective stimulator for protoplast fusion in the concentration of 30% (W IV). In such a condition, we obtained 1.2% cell fusion rate.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.2
• /
• pp.122-129
• /
• 2005

The characteristics of hydrogen storage have been investigated in the Ti-Cr-Mo and Ti-Cr-V ternary alloys with bcc structure. The alloys were melted by arc furnace and remelted 4-5 times for homogeneity. The lattice parameters, microstructures and phases of the alloys were examined by SEM, EDX and XRD, and the Pressure-Composition isotherms of the alloys were measured. From these data the relationship of the maximum and effective hydrogen storage capacities vs. chemical composition, lattice parameter and the radius of tetrahedral site were analyzed and discussed. The results showed that all of these alloy, in the range of the this study, had mainly bcc solid solutions with small amount of Ti segregation due to a lower melting point of Ti compared with other elements. Lattice parameters of the alloys were very near to the atomic average values of lattice parameters of the constituent elements. It was also found that maximum hydrogen storage capacities of the Ti-Cr-Mo alloys increased with increasing Ti content and the radius of tetrahedral site but the effective hydrogen storage capacities decreased after showing the maximum. The hydrogen storage capacities of the Ti-Cr-V alloys were almost same even though the V contens were quite different from alloy to alloy and this could be attributed to the almost same Ti/Cr ratio of the alloys. The maximum effective hydrogen storage capacity of the Ti-Cr-Mo alloys was revealed at Ti content of about 40${\sim}$50 at% and radius of tetrahedral site of 0.43${\sim}$0.45 nm. The Ti-Cr-V alloys showed the hydrogen storage capacities of 3.0 wt% and effective hydrogen storage capacities of 1.5 wt%.

• Korean Journal of Weed Science
• /
• v.9 no.2
• /
• pp.154-167
• /
• 1989

This study was conducted to determine the influence of various extracts from 21 medicinal plants including Bupleurm falcatum on the germination and growth of Lactuca sativa, Oryza native and E. crus-galli var. crus-galli, and the amount of their phenolic acids, fatty acids and organic acids, Water extract(5%) of all the medicinal plants, particularly Acorus gramineus, Cnidium officinale, Aconitum carmicheali, Bulpeurum falcatum, Zingiber officinale, Angelica gigas and Curcuma zeodaria inhibited over 90% of the lettuce seed germination and growth, indicating that medicinal plants contained the biologically active substances. The highest amount of phenolic compounds was observed in Prunus crmenica var, ansu(30.6013mg/g) followed by Aconitum ciliare(29.1008mg/g) and Cnidium officienale(27.2943mg/g) which inhibited markedly the germination of testing plants, showing the close relation of phenolic compounds to inhibitory effects. Cnidium officinale contained the highest amount of fatty acids(24.10mg/g) and organic acids(21.04mg/g) which may be partly related to inhibitory effects.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.41-48
• /
• 1982

A comparison was made for growth and yield of two rowed and six rowed barley varieties to differentiate their fundamental characteris in relation with brewing quality. Heading and maturing time of two rowed barley varieties were similar to those of six rowed covered but were earlier than those of six rowed naked ones. Most of two rowed varieties were spring barley and low temperature susceptible, but they were relatively photoinsensitive compared to six rowed varieties. Eventhough malting barley has heavier stands and grains, they were quite similar in yielding ability with six rowed cultivars with decreased number of grains per spike. In quality characters, malting barley has better germination energy and rate, lower protein content than the common six rowed barley and decisively better for brewing that six rowed barley with higher malt yield, extract yield and quality and enzyme activity. In comparison of malting barley varieties produced in Korea and Japan indicated that those varieties produced in Japan were better in germination characters, extract yield and quality, Kolback index and enzyme activity than those produced in Korea.