• 한국분말재료학회지
• /
• 제4권1호
• /
• pp.55-62
• /
• 1997

Flow and heat transfer characteristics of gas, and trajectories and cooling characteristics of droplets/particles in a gas atomizer were investigated by a numerical simulation using FLUENT code. Among several kinds of solution method, the k-$\varepsilon$ turbulent model, power-law scheme, SIMPLE algorithm is adopted in this study. Momentum and heat exchange between a continuous phase(gas) and a dispersed phase(particle) were taken into account. Particle trajectories are simulated using the Lagrangian method, and Rosin-Rammler formula is used for the particle size distribution. Streamlines, velocities and pressures of gas, and trajectories, velocities and cooling rates of particles have been investigated for the various gas inlet conditions. Small but very intensive recirculation is found just below the melt orifice, and this recirculation seems to cause the liquid metal to spread radially. Particle trajectory depends on the particle size, the location of particle formation and the turbulent motion of gas. Small particle cools down rapidly, while large diameter particles solidify slowly, and this is mainly due to the differences in thermal inertia.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.34-37
• /
• 2001

In this study, the capacitance-voltage properties of (Sr$_{1-x}$ .Ca$_{x}$)TiO$_3$(0.05$\leq$x$\leq$0.20)-based grain boundary layer ceramics were investigated. The ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were 1480~150$0^{\circ}C$ and 4 hours, respectively. The 2nd phase formed by the thermal diffusion of CuO from the surface leads to very excellent dielectric properties, that is, $\varepsilon$$_{r}$>50000, tan$\delta$<0.05, $\Delta$C<$\pm$10%. The capacitance is almost unchanged below about 20[V] but it decreases slowly about 20[V]. The results of the capacitance-voltage properties indicated that the grain boundary was composed of the continuous insulating layers.ulating layers.s.

• 청정기술
• /
• 제11권3호
• /
• pp.117-122
• /
• 2005

N-vinyl caprolactam (NVCL)은 초임계 분산 중합에 사용될 수 있는 비닐 아마이드 계열의 단량체이다. 이때 NVCL을 초임계 이산화탄소 상에서 분산 중합하기 위해서는 중합 초기 단계에 단량체가 $CO_2$에 모두 용해되어야 한다. 또한 최종 고분자로부터 미반응 단량체를 제거하기 위해서 중합 용매인 $CO_2$와 단량체 NVCL의 상거동 자료가 필수적이다. 하지만 단량체의 순수 물성은 측정 시 중합의 가능성이 있기 때문에 실험적인 제약이 있다. 본 연구에서는 이러한 단량체인 NVCL과 이와 유사한 작용기를 갖고 있는 N-methyl caprolactam (NMCL)의 순수 물성을 보다 정확하게 얻기 위하여 기존에 알려져 있는 그룹기여 방법을 수정하였다. 이때 유사한 구조를 갖는 ${\varepsilon}$-caprolactam을 바탕으로 새롭게 그룹 기여값을 얻고, 이를 NVCL, NMCL에 적용하였다. 또한 새롭게 수정된 순수 물성을 바탕으로 $CO_2$ + N-vinyl caprolactam과 N-methyl caprolactam 계에 대해 Peng-Robinson EOS와 van der Waals 1-fluid mixing rule을 이용하여 계산하고 실험값과 비교하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2955-2960
• /
• 2007

To control the coating thickness of zinc in the process of continuous hot-dip galvanizing, it is known from early day that the gas wiping through an air knife system is the most effective because of the obtainable of uniformity of coating thickness, possibility of thin coating, working ability in high speed and simplicity of control. But, the gas wiping using in the galvanizing process brings about a problem of splashing from the strip edge for a certain high speed of coating. And, it is known that the problem of splashing is caused mainly by the existence of separation bubble at the neighbor of the strip surface. In theses connections, in the present study, we proposed two kinds of air knife systems having the same expansion rate of nozzle, and the jet structures and coating thicknesses from a conventional and new proposed nozzles are compared. In numerical analysis, the governing equations consisted of two-dimensional time dependent Navier-Stokes equations, standard ${\kappa}-{\varepsilon}$ turbulence model to solve turbulence stress and so on are employed. As a result, it is found that it had better to use the constant rate nozzle from the point view of the energy saving to obtain the same coating thickness. Also, to reduce the size of separation bubble and to enhance the cutting ability at the strip, it is recommendable to use an air knife having the constant expansion rate nozzle.

• 전기학회논문지
• /
• 제62권4호
• /
• pp.523-528
• /
• 2013

In recent years, many efforts are increasingly being made to conserve the natural environment with enhanced emission standards and air quality standards. Also there are various methods necessary to be researched to minimize the emission of air pollutants. In particular, boilers of industrial facilities are major portions of the air pollution. The front duct which needs to be designed to reduce the gases to the electrostatic precipitator requires a bent tube, a reduction/extend tube and an auxiliary equipment, that is, a guide vane. This paper proposes an optimum design of the guide vane by a case study for electrostatic precipitator's flow uniformity. The operating conditions of this study are as follows: BMCR (Boiler Maximum Continuous Rate) and MGR (Maximum Guaranteed Rate) are 75%, 50%, and 30%; turbulent fluid dynamics model is based upon K-${\varepsilon}$ formulation. Presentation of the computed motion of particles is found to be quite useful to predict the precipitator performance by use CFD (Computational Fluid Dynamics).

• 센서학회지
• /
• 제22권1호
• /
• pp.71-75
• /
• 2013

Nuclear containment building is used as second blockage to protect us from a radiation leakage caused by the natural disaster or any accidents, so it's safety is important and must be kept with continuous surveillance. In this study, we measured the strain of a nuclear containment building's wall by using FBG sensor and investigated the structural safety of a nuclear containment building. 50 FBG strain sensors and 18 FBG strain sensors were attached on the side wall and upper dome of a nuclear containment building, respectively. We measured the strains of the outside concrete wall during the Structural Integrity Test (SIT) of a nuclear containment building. The strain of an upper dome was larger than that of a side wall, about $200{\mu}{\varepsilon}$. And the very small strain was measured at vertical direction of a side wall. These experimental results were used to evaluate the structural health of nuclear containment building.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.34-37
• /
• 2001

In this study, the capacitance-voltage properties of $(Sr_{1-x}\cdot Ca_x)TiO_3(0.05{\leq}x{\leq}0.20)$-based grain boundary layer ceramics were investigated. The ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were $1480\sim1500^{\circ}C$ and 4 hours. respectively. The 2nd phase formed by the thermal diffusion of CuO from the surface leads to very excellent dielectric properties, that is, ${\varepsilon}_r$ >50000, tan$\delta$ <0.05, ${\Delta}C$ < ${\pm}10%.$ The capacitance is almost unchanged below about 20[V] but it decreases slowly about 20[V]. The results of the capacitance-voltage properties indicated that the grain boundary was composed of the continuous insulating layers.

• Management Science and Financial Engineering
• /
• 제19권2호
• /
• pp.31-36
• /
• 2013

We propose a war-game model that is appropriate for a raid-type warfare in which, a priori, the maneuver of the attacker is relatively certain. The model is based on a multi-weapon extention of the Lanchester's law. Instead of a continuous time dynamic game with the differential equations from the Lanchester's law, however, we adopt a multi-period model relying on a time-discretization of the Lanchester's law. Despite the obvious limitation that two players make a move only on the discrete time epochs, the pragmatic model has a manifold justification. The existence of an equilibrium is readily established by its equivalence to a finite zero-sum game, the existence of whose equilibrium is, in turn, well-known to be no other than the LP-duality. It implies then that the war-game model dictates optimal strategies for both players under the assumption that any strategy choice of each player will be responded by a best strategy of her opponent. The model, therefore, provides a sound ground for finding an efficient reinforcement of a defense system that guarantees peaceful equilibria.

• 대한기계학회논문집B
• /
• 제32권9호
• /
• pp.695-703
• /
• 2008

Numerical analysis has been carried out to investigate air-side convective heat transfer characteristics in a compact heat exchanger with flat tubes and continuous plate fins according to the aspect ratio. RNG k-$\varepsilon$ model is applied for turbulence analysis. Simulation results such as air velocity and temperature distributions are presented, and heat transfer coefficients are compared with previous correlations for circular tubes. The numerical conditions are considered for the aspect ratios ranging from 3.06 to 5.44 and Reynolds number ranging from 1000 to 10,000. The results showed that heat transfer coefficients decreased with the increase of aspect ratio. From the calculated results a correlation of Colburn j factor for the considered aspect ratio in the compact heat exchanger system is suggested. The predicted results in this study can be applied to the optimal design of air conditioning system.

• 대한화학회지
• /
• 제26권3호
• /
• pp.160-164
• /
• 1982

단결정을 키우기에 적절한 용해도를 가진 $[U(PW_{11}O_{39})_2]^{10-}$의 구아니딘윰염을 합성하였다. 이 염 혹은 칼륨염을 사용하여 $[U(PW_{11}O_{39})_2]^{10-}$의 안정도를 용액의 pH의 함수로 조사하였으며, pH 3~7에서 안정함을 발견하였다. 이 영역에서 $PW_{11}O_{39}^{7-}$대 $U^{4+}$의 몰비가 2이상 되게 $PW_{11}O_{39}^{7-}$를 가하고 22.7kK band (${\varepsilon}$ 1030 M-1cm-1)띠의 세기를 측정함으로써 $U^{4+}$를 비색정량하는 방법을 개발하였다.$PW_{11}O_{39}^{7-}$ 를 사용하여 우라늄을 회수하는 방법을 개발하기 위해,$[U(PW_{11}O_{39})_2]^{10}$- 를 두 다른 방법으로 분해시켜 분리된$PW_{11}O_{39}^{7-}$ 를 정량하였다. $PW_{11}O_{39}^{7-}$의 회수율은 염기를 가해 분해시켰을 때 약 70%, $K_2S_2O_8$로 산화시켜 분해시켰을 때 약 80%이었다. 본 연구를 위해 $VOSO_4$를 이용한$PW_{11}O_{39}^{7-}$ 의 비색정량법도 개발하였다.