• 대한수학회논문집
• /
• 제26권4호
• /
• pp.603-610
• /
• 2011

In this paper, we propose an algorithm for identifying ${\omega}_j{\in}(0,\;{\infty}),\;a_j,b_j{\in}\mathbb{C}$ and N of the following trigonometric series $f(t)=a_0+ \sum\limits_{j=1}^N[a_jcos{\omega}_jt+b_j\;sin{\omega}_jt]$ by means of the finite number of sample values. We prove that the frequency components are shown to be the solutions of some characteristic equation related to the inverse of a Hankel matrix derived from the sample values.

• Journal of applied mathematics & informatics
• /
• 제17권1_2_3호
• /
• pp.391-399
• /
• 2005

In this paper we present an algorithm based on network flow techniques which provides a solution for a combinatorial problem. Then, in order to provide all the solutions of this problem, we make use of an algorithm that given the bipartite graph $G=(V_1 {\cup}{V_2},\;E,\;{\omega})$ outputs the enumeration of all bipartite matchings of given cardinality v and cost c.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.91-102
• /
• 1999

The paper describes a robust adaptive control algorithm for induction motor drive without speed sensor at low speed range. The control algorithm use only current sensors in a space vector pulse width modulation within loop control with rotor speed estimation and voltage source inverter. On-line rotor speed estimation is based on utilizing parallel model reference adaptive control system. MRAC of the modified flux model for flux and rotor speed estimator uses dual-adaptation mechanism, ${\omega}_r$ and ${\omega}_e$ scheme. The estimated flux components in the model can be compensated from the effects of offset errors on pure integrals. It can be compensated to the parameter variations and torque fluctuation with speed estimation in less then 10 rad/sec. In a simulation, the proposed induction motor control algorithm without speed sensor at very low speed range are shown to operate very well in spite of variable rotor time constant and fluctuating load without change the controller parameters. The suggested control strategy and estimation method have been validated by simulation study, and it proposed the designed system for the implementation using TI320C31 DSP/ASIC controller.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 추계 학술대회논문집
• /
• pp.141-146
• /
• 1998

An Euler/Navier Stokes solver has been developed for the analysis of steady and unsteady flows. The $q-{\omega}$ turbulent model has been incorporated into the solver in strongly coupled manner for stability and robustness. A new Chimera hole cutting algorithm, Cut-paste algorithm, has been devised for automatic Chimera hole cutting. Number of viscous/inviscid numerical computations demonstrate the accuracy and the versatility of the solver.

• 한국산학기술학회논문지
• /
• 제17권8호
• /
• pp.536-543
• /
• 2016

접지 시스템은 전력설비의 안전적 운영을 위해 필수적이며, 주요 고려대상인 대지저항률은 토양 종류, 수분, 온도에 따라 변하기 때문에 접지 시스템 설계에서 가장 중요하다. 제주의 지질구조는 화산지역의 특성상 다층구조를 형성하고 있어 지질구조에 따른 접지 저항값은 동일한 접지시스템 구축 지역이라도 지층구조에 따라 접지저항값이 다르게 나타날 수 있다. 본 논문에서는 제주의 대표적인 3종류의 토양에 접지를 설치하였을 때 접지저항 특성 변화를 분석하기 위해 3층 구조의 토양목업 시스템을 구성하였다. 구성된 토양 목업 시스템에서 웨너법을 사용하여 대지저항률을 측정하였으며, 대지모델을 수치적으로 분석할 수 있는 역산방법으로 Gauss-Newton 알고리즘을 사용하여 대지모델을 생성하였다. 기존 접지분야에서 사용되는 1차원 대지분석이 아닌 2차원 역산방법을 적용한 결과 실제 토양 목업에 구성한 3종류 층상 구조와 같은 3층 대지구조로 나타낼 수 있었다. 또한 일반적으로 접지에 사용되는 동봉, 동관, 탄소봉을 사용하여 접지의 변화특성을 분석한 결과 수분공급 상태에 따른 접지저항 변화폭은 동봉은 $2.9[{\Omega}]$, 동관은 $16.5[{\Omega}]$, 탄소봉의 경우 $20.1[{\Omega}]$으로 나타났으며, 수분의 영향으로 .탄소봉의 접지저항이 $141[{\Omega}]$으로 가장 낮게 나타남을 확인 하였다.

• 설비공학논문집
• /
• 제10권6호
• /
• pp.714-720
• /
• 1998

The differential pressure venturi-cone flowmeter is an advanced flowmeter which has many advantages such as wide range of measurement, high accuracy, excellent flow turn-down ratio, low headless, short installation pipe length requirement, and etc. Like other differential pressure flowmeters, the venturi-cone flowmeter uses the law of energy conservation, but its shape and position make it perform better than others. The cone acts as its own flow conditioner and mixer, fully conditioning and mixing the flow prior to measurement. For the analysis, we used Reynolds-averaged Wavier-Stokes equations and k-$\omega$ turbulence model. The equations were fully transformed into the computational domain, the pressure-velocity coupling was made through SIMPLER algorithm, and the equations were discretized using finite analytic solutions of the liberalized equations(Finite Analytic Method). To control the separation phenomenon on the cone surface, we proposed a new shape of cone, and analyzed the flowfield in the new flowmeter system, and found the improvement on the performance of the new cone flowmeter.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.232-239
• /
• 2009

Emerging social networking services provide a new paradigm for human-to-human communication. However, these services are centralized and managed by single service provider. In this paper, we propose MicroPost, a decentralized event notification service architecture for social applications based on publish/subscribe model. In our design space, event brokers are structured as an overlay network which provides the substrate of distributed peer-to-peer lookup service for storing and retrieving subscriptions with hashed keys. Event clients interact with event brokers to publish or subscribe social messages over the wide-area network. Using XML standards, we present an efficient algorithm to forward events for rendezvous-based matching in this paper. In our design space, the cost of routing is O(${\omega}log_kN$), where N is the number of event brokers, ${\omega}$ is the number of meta-data obtained from event messages, and k is a constant, which is selected by our design, to divide the identifier space and to conquer the lookup of given key. Consequently, what we achieved is an asynchronous social messaging service architecture which is decentralized, efficient, scalable, and flexible.

• 해양환경안전학회지
• /
• 제24권3호
• /
• pp.325-331
• /
• 2018

This paper deals with the dynamical analysis of a vessel that leads to capsize in regular beam seas. The complete investigation of nonlinear behaviors includes sub-harmonic motion, bifurcation, and chaos under variations of control parameters. The vessel rolling motions can exhibit various undesirable nonlinear phenomena. We have employed a linear-plus-cubic type damping term (LPCD) in a nonlinear rolling equation. Using the fourth order Runge-Kutta algorithm with the phase portraits, various dynamical behaviors (limit cycles, bifurcations, and chaos) are presented in beam seas. On increasing the value of control parameter ${\Omega}$, chaotic behavior interspersed with intermittent periodic windows are clearly observed in the numerical simulations. The chaotic region is widely spread according to system parameter ${\Omega}$ in the range of 0.1 to 0.9. When the value of the control parameter is increased beyond the chaotic region, periodic solutions are dominant in the range of frequency ratio ${\Omega}=1.01{\sim}1.6$. In addition, one more important feature is that different types of stable harmonic motions such as periodicity of 2T, 3T, 4T and 5T exist in the range of ${\Omega}=0.34{\sim}0.83$.

• 대한수학회논문집
• /
• 제16권4호
• /
• pp.679-690
• /
• 2001

Doubly stochastic matrices are n$\times$n nonnegative ma-trices whose row and column sums are all 1. Convex polytope $\Omega$$_{n}$ of doubly stochastic matrices and more generally (R,S), so called transportation polytopes, are important since they form the domains for the transportation problems. A theorem by Birkhoff classifies the extremal matrices of , $\Omega$$_{n}$ and extremal matrices of transporta-tion polytopes (R,S) were all classified combinatorially. In this article, we consider signed version of $\Omega$$_{n}$ and (R.S), obtain signed Birkhoff theorem; we define a new class of convex polytopes (R,S), calculate their dimensions, and classify their extremal matrices, Moreover, we suggest an algorithm to express a matrix in (R,S) as a convex combination of txtremal matrices. We also give an example that a polytope of signed matrices is used as a domain for a decision problem. In this context of finite reflection(Coxeter) group theory, our generalization may also be considered as a generalization from type $A_{*}$ n/ to type B$_{n}$ D$_{n}$. n/.

• 한국전자파학회논문지
• /
• 제29권7호
• /
• pp.484-490
• /
• 2018

본 논문은 13.56 MHz 임피던스 자동 정합 시스템 내의 VI 센서를 이용하여 전압 신호와 전류 신호를 측정하고, 부하임피던스를 계산하는 새로운 알고리즘에 대해서 기술하였다. 기존의 $50{\Omega}$ 교정 부하로 하던 방식에서 벗어나 임의의 복소수 교정 부하를 사용하여 에러율이 향상되는 알고리즘을 제안한다. 에러율은 $R_{IN}$ 평균 1 % 이하, $X_{IN}$은 평균 20 %이하 목표로 한다. 일차적으로 믹서를 사용하여 IF 주파수를 계산하여 에러율을 줄였고, 두 번째로 임의의 복소수 부하를 교정 부하로 사용하였을 때 에러율이 $R_{IN}$은 평균 2.7 %에서 평균 0.3 %로 감소하였고, $X_{IN}$은 평균 102 %에서 평균 18.3%까지 감소하였습니다.