• 한국세라믹학회지
• /
• 제22권3호
• /
• pp.46-52
• /
• 1985

(Ba0.8. Sr0.2) $TiO_3$ semiconducting ceramic with and without Ti-excess composition were prepared by various sintering temperature. The effects of Ti compositions on the samples were discussed in terms of color micro-structure resistivity at room temperature and the positive temperature coefficient resistivity(PTCR). The 1.02mol Ti-excess composition provides better PTCR properties and has uniform micrositructures with 5-7${\mu}{\textrm}{m}$.

• 한국지구과학회지
• /
• 제26권3호
• /
• pp.283-296
• /
• 2005

본 연구에서는 복사전달모델을 통하여 $9.7{\mu}m$오존 흡수대에 미치는 오존 및 열적(i.e., 지표 온도) 효과를 각각 조사하였다. 또한 오존주의보가 수도권 지역(37.2-37.7 N, 125.7-127.2 E)에 발령되었던 2003년 4일에 대한 위성(MODIS Aqua; ECT 13:30) 및 지상 오존(79개 관측소)의 동시 관측 자료를 기초로 지상 오존에 대한 원격탐사 방법을 제시하였다. 여기서 구름 효과를 제거하고 오존 연직 분포를 분석하기 위하여 종관기상 자료도 사용하였다. 주어진 오존 농도($327\~391$ DU)에 대하여 산출된 $9.6{\mu}m$에서의 상향 복사휘도는 표면온도 Ts = 290 K에서 $5.52\~5.78Wm^{-2}sr^{-1}$, 그리고 Ts = 325 K에서는 $9.00\~9,57Wm^{-2}sr^{-1}$이었다. 따라서 오존 흡수 세기(i.e., $11{\mu}m$와 $9.7{\mu}m$ 밝기온도 간의 차; $T_{11-9.7}$)를 이용한 오존 원격탐사 시에 세기 변화에 대한 순수한 오존 효과는$0.26Wm^{-2}sr^{-1}/64\;DU$, 그리고 열적 효과는 $0.31Wm^{-2}sr^{-1}/35 K$이었다. 본 연구에서는 흡수 세기와 지상 관측 간에 유의적인 상관을 보이는 경우에 대하여 적외선 위성 관측에서 지상 오존을 원격탐사하는 경험식을 유도하였다. 유도된 지상 오존 농도와 관측값과의 상관은 $49\~63\%$로 유의수준 $1\%$에서 유의미하였다. 경험식을 개선하기 위하여는 지상 오존 대신에 대류권 오존 자료를 사용하고, 성층권 오존 변화도 고려하는 후속 연구가 요구된다.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.525-530
• /
• 2011

We investigated the electrical properties the starting material and sintering condition on the laminated PTC thermistor for micro circuit protection. The influences of $BaTiO_3$ powder with the 0.3 and 0.45 ${\mu}m$ size and the electrical characteristics (Ba,Sr)$TiO_3$ sintered at 1350~1400$^{\circ}C$ for 2 h in a reducing atmosphere (1% $H_2/N_2$). The sintered (Ba,Sr)$TiO_3$ was increased pore and the grain size was decreased according to increasing Sr additions. In relative permittivity, the phase transition temperature of (Ba,Sr)$TiO_3$ was decreased for 2.5$^{\circ}C$ according to increasing 0.01 mole Sr additions, and the phase transition dose not appeared about 0.3 mole Sr addition. The (Ba,Sr)$TiO_3$ was show the low resistance from 0.01 mole to 0.05 mole by Sr addition, regardless of sintering temperature. The (Ba,Sr)$TiO_3$ was show $10^2$ jump order at 0.1 and 0.2 mole Sr addition, and PTCR of the sintered $(Ba_{0.7}Sr_{0.3})TiO_3$ does not appeared about 0.3 mole Sr addition, regardless of the sintering temperature and starting material size.

• 대한약리학회지
• /
• 제30권1호
• /
• pp.125-136
• /
• 1994

갑각류 골격근의 SR에서 칼슘유리 channel protein complex의 성격을 규명하기 위해 민물가재 및/또는 바다가재의 SR vesicles을 분리하여 $^{45}Ca$ 유리, $[^3H]ryanodine$결합, 및 immunoblot 실험을 실시하여 다음과 같은 결과를 얻었다. 1.민물가재 SR의 $[^3H]ryanodine$결합 실험에서 민물가재 SR의 maximal binding site및 affinity모두 바다가재에서 보다 낮았으나, high affinity binding site이었다. Extravesicles 칼슘농도를 증가시켰을 때 $[^3H]ryanodine$결합은 약간 증가되었으나, AMP나 AMP와 caffeine을 동시에 첨가하였을 때는 현저히 증가되었다(p<0.05). 이런 증가 현상은 $MgCl_2$나 tetracaine으로 유의성 있게 억제되었으나(p<0.001), ruthenium red에 의해서는 약간 억제되었다. 2.민물가재 SR을 전기영동하였을 때 바다가재의 ryanodine receptor band (HMWBr)와 비슷하나 포유류의 것(HMWBS) 보다는 약간 빠른 mobility를 나타낸다. 3.바다가재 HMWBr에 대한 polyclonal Ab를 이용한 민물가재, 바다가재 및 토끼 골격근의 칼슘유리 channel간의 면역학적 교차반응에서 민물가재와 바다가재의 칼슘유리 channel 간에는 교차반응이 있었으나, 포유류의 것과는 아무런 반응이 없었다. 4.민물가재 SR에서 $^{45}Ca$유리는 extravesicles의 칼슘농도 증가에 따라서 증가되었고, 낮은 외부 칼슘 농도에서 바다가재 보다 빠르게 일어났으나, AMP와 caffeine에 의해 영향을 받지 않았고, $MgCl_2$와 tetracaine으로 약간($3{\sim}8%$) 그리고 고농도의 ruthenium red로 중등도(23%) 억제되었다. 이상의 실험성적으로 갑각류 칼슘유리 channel protein은 포유류의 것과는 기능적으로나 면역학적으로 매우 다른 특징을 가지고 있고, 민물가재와 바다가재 칼슘유리 channel은 서로 유사한 특징을 갖지만, 민물가재의 칼슘유리 channel이 바다가재의 것보다 외부칼슘에 예민한 기능을 갖는 것으로 사료된다.

• 한국세라믹학회지
• /
• 제32권4호
• /
• pp.516-524
• /
• 1995

In this study, to prepare the dielectric (Ba, Sr)TiO3 thin films by the sol-gel process, Titaminum (IV) sio-propoxide (Ti[OCH(CH3)2]4), Ba and Sr acetate were used for sol and thin films were prepared by dip-coating process. Stability of sol decreased with the increase of Sr, and thickness of thin films were obtained 0.13~0.17${\mu}{\textrm}{m}$ by 1 coating cycle. Transmittance of amorphous thin films heated at 500 and 55$0^{\circ}C$ was very good, and crystallization tendency of thin films according to heat-treatment temperature and crystallization characteristics of thin films heated at 11$0^{\circ}C$ for 3 hrs were analysed. As a result, good perovskite structure was obtained higher than 100$0^{\circ}C$, and tetragonality of thin film was decreased but pyrochlore was formed with increasing Sr. In case of addition to substitute 0.4mol% Sr for Ba, dielectric constant was 288 and loss factor (tan $\delta$) was 0.04.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.400-403
• /
• 2004

The dielectric properties of $BaTiO_3/SrTiO_3$ multilayered thick films with printing times were investigated. $BaTiO_3/SrTiO_3$ thick films were deposited by Screen-printing method on alumina substrates. The obtained films were sintered at $1400^{\circ}C$ with bottom electrode(Pt) for 2hours. The structural and the dielectric properties were investigated for various printing times. The BST phase appeared in all of the $BaTiO_3/SrTiO_3$ mutilayered thick films. The $BaTiO_3/SrTiO_3$ multilayered thick film thickness, obtained by one printings, was $50{\mu}m$. The dielectric constant and dielectric loss of the $BaTiO_3/SrTiO_3$ multilayered thick film, obtained by five printings, were about 266, 0.8% at 1Mhz, respectively.

• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.120-126
• /
• 1996

In the present study, we have studied on the characteristics of BST thin films with various Ba/Sr ratios by using sol-gel method. Barium-acetate, strontium-acetate and titanium isopropoxide are used as starting materials to fabricate BST thin films by sol-gel method. The fabrication conditions are estabilished through the TG-dT analyses and XRD measurements. BST thin films with the Ba/Sr ratios of 90/10, 70/30, 50/50 and 30/70 were deposited on the Pt/Ta/SiO$_{2}$Si substrate with the estabilished sol-gel process, and their characteristics were examined. The relative permittivity and the leakage current density at 5V vary from 287 to 395 and from 2.3 to 220${\mu}$A/cm$^{2}$, respectively, with various Ba/Sr ratio. Among the films investigatd in this research, BST (70/30) thin film shows the best relative permittivity and dielectric loss of BST (70/30) thin film are 395 and 0.045, respectively and the leakage current density at 5V is 2.3${\mu}$A/cm$^{2}$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.239-242
• /
• 1990

The effect of $CaCo_3$, $SrCo_3$, $SiO_2$ and $H_3BO_3$ in the range of 0.1-1.0 wt% on strontium ferrites consisting of the magnetoplumbite phase $SrO-5.7Fe_2O_3$ were investigated. The hysteresis loop, density, demagnetization curve and the intrinsic coercive force were measured on anisotropic ferrite. The particle diameter and 0.5(wt%) of second additive $CaCo_3$ is particularly important for the properties of anisotropic ferrite. When the particle diameter is decreased from 1.98(${\mu}m$) to 1.07(${\mu}m$), the remance is increased from 2900 to 4010(G) and the coercive force from 2150 to 2850(Oe) at a sintering temperature 1230 ($^{\circ}C$). Remance Br(G), coercleve force(Oe) and maximum energy product of sample A-16 are87(%), 56(%), 67(%) of S-W model theoretical value.

• 마이크로전자및패키징학회지
• /
• 제9권1호
• /
• pp.29-33
• /
• 2002

The SrS:Cu, Ag thin film electroluminescient devices were fabricated on $AlTiO_3$/ITO/glass substrates by electron-beam evaporation. The emission spectrum of the device was about 460 nm with $\chi$=0.20, y=0.29 in the CIE color coordinator. It was found that the emission spectrum was saturated to pure blue color when Ag sensitizer was doped in SrS:CuCl phosphors. The luminance of the device was increased by increasing the sulfur pressure. The measured luminance was saturated with 430 cd/$m^2$at the applied voltage of 90 V and the maximum luminance was 580 cd/$m^2$at 110V. The polarization charge and conduction charge of the devices were found to be found to be about $3.5\mu$C/$\textrm{cm}^2$ and $7.4\mu$C/$\textrm{cm}^2$, respectively.

• 한국재료학회지
• /
• 제1권2호
• /
• pp.71-76
• /
• 1991

The superconducting powders in $YBa_2Cu_3O_{7-x}$ and Bi-Pb-Sr-Ca-Cu-O system were easily prepared from water in oil type emulsion by loading each cation into the aqueous phase. In $YBa_2Cu_3O_{7-x}$ system, the superconducting orthorhombic phase was formed by calcining at $750^{\circ}C$ for 10h in $O_2$. The size of the superconducting phase powders was submicron. The density of the sintered specimen using this powders was about 95% of the theoretical density and the resistance sharply decreases at about 90K, In Bi-Pb-Sr-Ca-Cu-O system the low Tc phase($(Bi, Pb)_2Sr_2Ca_1Cu_2O_y$) was formed by calcining at $800^{\circ}C$ for 10h in a low oxygen partial pressure of 1/20 atm The shape of clacined powder is thin plate of which size is about $2\mu\textrm{m}$ and thickness is smaller than $\mu\textrm{m}$. It was observed that the high Tc phase ($(Bi, Pb)_2Sr_2Ca_2Cu_3O_y$) was formed by sintering at $850^{\circ}C$ for 30h in oxygen pressure of 1/20 atm without intermediary grinding. The above sintered sample exhibited superconductivity with a Tc(zero)=105K.