• Ocean and Polar Research
• /
• v.30 no.4
• /
• pp.407-418
• /
• 2008

Seawater samples were collected at discrete depths from five stations across the polar front in the Drake Passage (Antarctic Ocean) by the $20^{th}$ Korea Antarctic Research Program in December, 2006. Nitrate concentrations of seawater increase with depth within the photic zone above the depth of Upper Circumpolar Deep Water (UCDW). In contrast, ${\delta}^{15}N$ values of seawater nitrate decrease with depth, showing a mirror image to the nitrate variation. Such a distinct vertical variation is mainly attributed to the degree of nitrate assimilation by phytoplankton as well as organic matter degradation of sinking particles within the surface layer. The preferential $^{14}{NO_3}^-$ assimilation by the phytoplankton causes $^{15}{NO_3}^-$ concentration to become high in a closedsystem surface-water environment during the primary production, whereas more $^{14}{NO_3}^-$ is added to the seawater during the degradation of sinking organic particles. The water-mass mixing seems to play an important role in the alteration of ${\delta}^{15}N$ values in the deep layer below the UCDW. Across the polar front, nitrate concentrations of surface seawater decrease and corresponding ${\delta}^{15}N$ values increase northward, which is likely due to the degree of nitrate utilization during the primary production. Based on the Rayleigh model, the calculated ${\varepsilon}$ (isotope effect of nitrate uptake) values between 4.0%o and 5.8%o were validated by the previously reported data, although the preformed ${\delta}^{15}{{NO_3}^-}_{initial}$ value of UCDW is important in the calculation of ${\varepsilon}$ values.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.8
• /
• pp.387-391
• /
• 2006

The Ag photodoping effect in amorphous $As_{40}Ge_{10}Se_{15}S_{35}$ chalcogenide thin films for holographic recording has been investigated using a He-Ne laser (${\lambda}$=632.8 nm). The chalcogenide films thickness prepared in the present work were thinner in comparison with the penetration depth of recording light ($d_p=1.66{\mu}m$). It exhibits a tendency of the variation of the diffraction efficiency (${\eta}$) in amorphous chalcogende films, independently of the Ag photodoping. That is, ${\eta}$ increases rapidly at the beginning of the recording process and reaches the maximum (${\eta}_{max}$) and slowly decreases slowly with the exposed time. In addition, the value of ${\eta}_{max}$ depends strongly on chalcogenide film thickness(d) and its maximum peak among the films with d = 40, 80, 150, 300, and 633 nm is observed 0.083% at d = 150 nm (approximately 1/2 ${\Delta}n$), where ${\Delta}$n is the refractive index of chalcogenide thin film (${\Delta}n=2.0$). The ${\eta}$ is largely enhanced by Ag photodoping into the chakogenides. In particular, the value of ${\eta}_{max}$ in a bilayer of 10-nm-thick Ag/150-nm-thick $As_{40}Ge_{10}Se_{15}S_{35}$ film is about 1.6%, which corresponds to ${\sim}20$ times larger than that of the single-layer $As_{40}Ge_{10}Se_{15}S_{35}$ thin film (without Ag). And we obtained the diffraction pattern according to the formation of (P:P) polarization holographic grating using Mask pattern and SLM.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.51.2-51.2
• /
• 2010

We have investigated 63 intense geomagnetic storms (Dst $\leq$ -100 nT) that occurred from 1998 to 2006. Using these events, we compared Dst forecast models: Burton et al. (1975), Fenrich and Luhmann (1998), O'Brien and McPherron (2000a), Wang et al. (2003), and Temerin and Li (2002, 2006) models. For comparison, we examined a linear correlation coefficient, RMS error, the difference of Dst minimum value (${\Delta}$peak), and the difference of Dst minimum time (${\Delta}$peak_time) between the observed and the predicted during geomagnetic storm period. As a result, we found that Temerin and Li model is mostly much better than other models. The model produces a linear correlation coefficient of 0.94, a RMS (Root Mean Square) error of 14.89 nT, a MAD (Mean Absolute Deviation) of ${\Delta}$peak of 12.54 nT, and a MAD of ${\Delta}$peak_time of 1.44 hour. Also, we classified storm events as five groups according to their interplanetary origin structures: 17 sMC events (IP shock and MC), 18 SH events (sheath field), 10 SH+MC events (Sheath field and MC), 8 CIR events, and 10 nonMC events (non-MC type ICME). We found that Temerin and Li model is also best for all structures. The RMS error and MAD of ${\Delta}$peak of their model depend on their associated interplanetary structures like; 19.1 nT and 16.7 nT for sMC, 12.5 nT and 7.8 nT for SH, 17.6 nT and 15.8 nT for SH+MC, 11.8 nT and 8.6 nT for CIR, and 11.9 nT and 10.5 nT for nonMC. One interesting thing is that MC-associated storms produce larger errors than the other-associated ones. Especially, the values of RMS error and MAD of ${\Delta}$peak of SH structure of Temerin and Li model are very lower than those of other models.

• Korean Journal of Materials Research
• /
• v.22 no.5
• /
• pp.253-258
• /
• 2012

Activated magnetite ($Fe_3O_{4-{\delta}}$) was applied to reducing $CO_2$ gas emissions to avoid greenhouse effects. Wet and dry methods were developed as a $CO_2$ removal process. One of the typical dry methods is $CO_2$ decomposition using activated magnetite ($Fe_3O_{4-{\delta}}$). Generally, $Fe_3O_{4-{\delta}}$ is manufactured by reduction of $Fe_3O_4$ by $H_2$ gas. This process has an explosion risk. Therefore, a non-explosive process to make $Fe_3O_{4-{\delta}}$ was studied using $FeC_2O_4{\cdot}2H_2O$ and $N_2$. $FeSO_4{\cdot}7H_2O$ and $(NH_4)_2C_2O_4{\cdot}H_2O$ were used as starting materials. So, ${\alpha}-FeC_2O_4{\cdot}2H_2O$ was synthesized by precipitation method. During the calcination process, $FeC_2O_4{\cdot}2H_2O$ was decomposed to $Fe_3O_4$, CO, and $CO_2$. The specific surface area of the activated magnetite varied with the calcination temperature from 15.43 $m^2/g$ to 9.32 $m^2/g$. The densities of $FeC_2O_4{\cdot}2H_2O$ and $Fe_3O_4$ were 2.28 g/$cm^3$ and 5.2 g/$cm^3$, respectively. Also, the $Fe_3O_4$ was reduced to $Fe_3O_{4-{\delta}}$ by CO. From the TGA results in air of the specimen that was calcined at $450^{\circ}C$ for three hours in $N_2$ atmosphere, the ${\delta}$-value of $Fe_3O_{4-{\delta}}$ was estimated. The ${\delta}$-value of $Fe_3O_{4-{\delta}}$ was 0.3170 when the sample was heat treated at $400^{\circ}C$ for 3 hours and 0.6583 when the sample was heat treated at $450^{\circ}C$ for 3 hours. $Fe_3O_{4-{\delta}}$ was oxidized to $Fe_3O_4$ when $Fe_3O_{4-{\delta}}$ was reacted with $CO_2$ because $CO_2$ is decomposed to C and $O_2$.

• Journal of Korean Society of Forest Science
• /
• v.97 no.4
• /
• pp.357-362
• /
• 2008

We compared the morphological characters and stable isotopes of seeds of wild simulated ginseng with those of cultivated field ginseng. Seeds were collected from ten areas for wild simulated ginseng and two areas for cultivated field ginseng. The length, width, thickness and number of seeds per gram were measured and the ratio of stable isotopes of carbon and nitrogen was analysed as well. There was a overlapping variation of morphological characters and the ratio of stable isotope of the wild simulated ginseng among study areas. In Geumsan area, compared with the seed of cultivated field ginseng, the seed of wild simulated ginseng was significantly small and light, and the ${\delta}^{15}N$(‰) of wild simulated ginseng was lower than that of cultivated field ginseng. However, it is somewhat impossible to compare the regional variation of the unique value of ${\delta}^{15}N$(‰) among study areas of wild simulated ginseng. We can suggest the value of ${\delta}^{15}N$(‰) can be used as detection factor for cultivation regime like chemical fertilization and organic farming.

• YAKHAK HOEJI
• /
• v.52 no.3
• /
• pp.172-175
• /
• 2008

Stable isotope ratio of carbon and nitrogen ($\delta^{13}C$ & $\delta^{15}N$), and $\Delta^{9}$-tetrahydrocannabinol (THC) contents were measured on 37 Korean cannabis and 10 commercial grade marijuana seized in Korea. Factors influencing on the measured values and their variations were investigated. $\delta^{13}C$ value of cannabis is specified mainly by water availability. Korean cannabis showed relatively low $\delta^{13}C$ values ranging -33.29$\sim$-27.01% (mean=-31.01%), which reflect geographic conditions of Korea where is rainy, especially during summer. $\delta^{15}N$ values, which reflect individual planting conditions, were relatively high up to -0.5$\sim$18.0% (mean=6.44%). It reflects characteristics of Korean cannabis growing wild in forest or cultivated in fertile soil. Tetrahydrocannabinol is the major hallucinogenic compound of cannabis. Ethanol extracts of cannabis leaves were derivatized by N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA), and the derivatives were analyzed by GC-MS in selected ion monitoring (SIM) mode. THC contents of Korean cannabis ranged 0.11$\sim$4.34% (mean=1.47%), which were relatively low compared with commercial grade marijuana.

• Restorative Dentistry and Endodontics
• /
• v.40 no.4
• /
• pp.255-261
• /
• 2015

Objectives: The aim of this study was to evaluate the effect of three different drinks on the color parameters of four different restorative materials. Materials and Methods: Three different composites (Filtek Ultimate Universal Restorative, Filtek Ultimate Flowable, and Filtek Silorane, 3M ESPE) and a polyacid-modified composite resin material (Dyract XP, Dentsply DeTrey GmbH) were evaluated. Eighty-four disc-shaped specimens of 8 mm in diameter and 2 mm in thickness were prepared (n = 21 each). Color coordinates ($L^*a^*b^*$, ${\Delta}L^*$, ${\Delta}a^*$, ${\Delta}b^*$, and ${\Delta}E^*$) were measured using a $V{\dot{I}}TA$ Easyshade Compact ($V{\dot{I}}TA$ Zahnfabrik) after 24 hr of storage (baseline) and after 30 day of storage in three different beverages of black tea, Coca cola, or water (control) (n = 7). In each beverage, the specimens were stored three times a day, one hr each, for 30 day. The color changes (${\Delta}E$) were calculated and were analyzed by Kruskal-Wallis and Dunn multiple comparison test. Results: The color difference (${\Delta}E^*$) of the resin materials ranged between 1.31 and 15.28 after 30 day of immersion in the staining solutions. Dyract XP in Coca cola ($15.28{\pm}2.61$) and black tea ($12.22{\pm}2.73$) showed the highest mean ${\Delta}E^*$ value after 30 day, followed by Filtek Ultimate Universal Restorative ($5.99{\pm}1.25$) and Filtek Ultimate Flowable ($4.71{\pm}1.40$) in black tea (p < 0.05). Conclusions: The compomers displayed unacceptable color changes at the end of 30 day in all beverages. Among resin composites, the silorane based composite exhibited relatively good color stability than the others. Filtek Ultimate Universal Restorative and Filtek Flowable showed similar color changes in all beverages.

• Applied Biological Chemistry
• /
• v.40 no.6
• /
• pp.556-560
• /
• 1997

The removal efficiency of COD and the production of ${\delta}-aminolevulinic$ acid (ALA) were concurrently investigated for both purifying the soybean curd wastewater of high BOD and utilizing the wastewater as a renewable substrate of ALA production using Rhodobacter capsulatus KK-10. Its wastewater was a favorable media for the growth of photosynthetic bacteria in terms of its environmental characteristics having COD/BOD rate of 0.98, ratio of BOD : N : P=100 : 6 : 4, BOD/N ratio of 17.2, lactic acid of 1,080 ppm. Its COD value wastewater was decreased to 94% and dry cell weight was approached to about 1.2 g/l after cultivation of the photosynthetic bacteria for 4 days. By the addition of 15 mM levulinic acid (LA) into the wastewater at the middle log phase of cell growth, the amount of ALA secreted was 55 mg/l. The ALA production was considerably increased to 114 mg/l under the cultural condition of 15 mM supplementations of glycine and succinate with LA at the same period. Furthermore the maximum ALA production of 120 mg/l and COD removal efficiency of 92% were accomplished in the soybean curd wastewater enriched with one addition of 15 mM LA and three serial additions 15 mM ALA precursors.

• Journal of dental hygiene science
• /
• v.13 no.2
• /
• pp.165-173
• /
• 2013

The purpose of this study was to evaluate the surface change after 15% carbamide peroxide home bleaching to various restorative materials (composite resin [CR], resin modified glass ionomer [RMGI] and glass ionomer [GI]) and to observe the effect of surface condition of the materials on re-staining. Three esthetic restorative materials (Filtek Z250, 3M, USA; Fuji II LC, GC, Japan; Fuji II, GC, Japan) were used in this study. Twenty specimens per material group were made and divided into two groups (bleached and control). The specimens were immersed in coffee after applying bleaching agent. The color change and surface roughness were measured before and after bleaching and after immersion in coffee. The data were analyzed with SPSS 18.0. The results were as follows: 1. The color of all experiment groups was significantly changed after bleaching (p<0.05). RMGI was the greatest value of ${\Delta}E^*$ and ${\Delta}L^*$. GI and CR groups were in ordering (p<0.05). The ${\Delta}a^*$ value was decreased GI, RMGI and CR. RMGI was only significantly decreased in ${\Delta}b^*$ value (p<0.05). 2. The surface roughness before and after bleaching was significantly different on CR, RMGI and GI (p<0.05). 3. After staining with coffee, the value of ${\Delta}E^*$ was increased in GI, RMGI and CR, furthermore GI and RMGI showed significant difference in the bleaching groups (p<0.05). The ${\Delta}L^*$ value of GI and RMGI was significantly decreased. 4. The change of surface roughness after staining was not significantly different in all groups (p>0.05). The maintenance of color stability in esthetic restorations is one of the most important properties. Tooth whitening is for the aesthetic. Therefore, dental professionals should notice to patients about re-staining after tooth whitening. They should give an instruction that how to prevent and which kinds of agents could be stained.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.2
• /
• pp.775-780
• /
• 2014

Objectives: TCR-gamma-delta+T cells (${\gamma}{\delta}$ T cells) are non-conventional T lymphocytes that can recognize and eradicate tumor cells. Our previous studies showed that infiltration and function of ${\gamma}{\delta}$ T cells were substantially attenuated in hepatocellular carcinoma (HCC). However, their prognostic value was not clarified. Methods: The association between ${\gamma}{\delta}$ T cells and the clinical outcomes was determined by immunohistochemistry (IHC) in a HCC patient cohort (n = 342). Results:Immunohistochemistry showed decreased infiltration of ${\gamma}{\delta}$ T cells in tumoral tissues compared with paired peritumoral tissues. The counts of ${\gamma}{\delta}$ T cells in peritumoral tissues were negatively correlated with tumor size (P = 0.005). Survival analysis showed that the levels of peritumoral ${\gamma}{\delta}$T cells were related to both time to recurrence (TTR) and overall survival (OS) (P = 0.010 and P = 0.036, respectively) in univariate analysis, and related to TTR in multivariate analysis (P = 0.014, H.R. [95% CI] = 0.682 [0.502-0.927]). Furthermore, the level of peritumoral ${\gamma}{\delta}$ T cells showed independent prognostic value for TTR in Barcelona Clinic Liver Cancer (BCLC) stage A patients (P = 0.038, H.R. [95% CI] = 0.727 [0.537-0.984]). However, tumoral ${\gamma}{\delta}$ T cells did not show independent prognostic value for either TTR or OS in HCC patients. Conclusions: Low counts of ${\gamma}{\delta}$ T cells in peritumoral liver tissue are related to a higher incidence of recurrence in HCC and can predict postoperative recurrence, especially in those with early-stage HCC.