• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.76-92
• /
• 1997

Porpilyromonas endodontalis is specifically involved in endodontic infections. The bacterium can be isolated almost exclusively only from infected rool canals. P. gingivalis also has been implicated in endodontic infection. Pathogemcity of P. gingival is is attributed to a variety of virulence factors, especially proteases, produced by the bacterium. Importance of P. endodontalis in endodontic infection has been revealed. However, the pathogenic property of P. endodontalis has not been extensively studied. The present study was undertaken to characterize the proteolytic activity of P. endodontalis and compare the activity with that of P. gingivalis which has the most potent and diverse proteases among oral bacteria. For this purpose, culture supematants(SUP) and cell extracts(CE) were obtained from these two bacteria and were subjected to zymography using 15% polyacrylamide gel copolymerized with gelatin, type I, IV collagens or albumin. Hydrolysis of the collagens was further investigated by the cleavage assay using native type I and IV collagens in solution-phase. The results were as follows: 1. P. endodontalis apparently has a proteolytic activity that is comparable with that of P. gingivalis. 2. SUP and CE obtained from P. endodontalis and P. gingival is showed the strongest activity for gelatin, followed by type I and IV collagens, and albumin. 3. In the zymography, no noticeable difference in proteolytic activity for gelatin and albumin between the SUP and CE was observed, but in the cleavage assay using native collagens, the SUP showed a stronger collagenolytic activity than the CE. 4. The gelatinolytic activity of both the SUP and CE from these two bacteria was diminished in the presence of $CaCl_2$ or reducing agents such as ${\beta}$-mercaptoethanol and dithiothreitol(DTT). 5. Type I(calf skin and human placenta) collagenolytic activity of P. endodontalis and P. gingivalis was reduced by DTT but not affected by $CaCl_2$. The inhibitory effect of DTT, however, was reduced to some extent by $CaCl_2$. 6. Type IV collagenolytic activity of these two bacteria was not affected by $CaCl_2$ but increased to some extent in association with the reducing agents. 7. Hydrolysis of albumin by P. endodontalis and P. gingivalis was demonstrated only in the presence of the reducing agents. The overall results indicate that with respect to proteolytic activity, P. endodontalis appears to be as potent as P. gingivalis, or maybe more, and its proteolytic characteristic is similar to that of P. gingivalis. This suggests that P. endodontalis has so potent proteolytic activity that can participate by itself in endodontic infections and apical periodontitis, causing tissue destruction.

• Food Science and Biotechnology
• /
• v.18 no.5
• /
• pp.1204-1211
• /
• 2009

Hericium erinaceus is an edible mushroom used as a medicinal food in Asian countries. In this study, the chemopreventive effects of H. erinaceus mycelia hot water extract (HEW) were evaluated. HEW remarkably induced the luciferase activity of the antioxidant response element (ARE), located in the promoter region of phase 2 and antioxidant genes and regulated by nuclear factor E2-related factor 2 (Nrf2). The up-regulation of ARE activity by HEW corresponded with the induction of Nrf2 and the antioxidant enzyme, hemeoxygenase-1. The inhibition of cyclooxygenase-2 (COX-2) activity is a promising effective approach in cancer chemoprevention, and HEW prominently suppressed COX-2 protein expression in HepG2 cells. Furthermore, HEW showed anti-inflammatory activity by modulating inflammatory mediators such as nitric oxide (NO), inducible NO synthase, tumor necrosis factor-${\alpha}$, interleukin-$1{\beta}$, and the transcription factor, nuclear factor-${\kappa}B$, in lipopolysaccharide-stimulated RAW 264.7 cells. These results suggest that H. erinaceus possessed anti-tumor and anti-inflammatory effects via the modulation of Nrf2/ARE and inflammatory signaling pathways, and may therefore have potential use as a natural chemopreventive agent.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.6
• /
• pp.150-158
• /
• 2007

As the amount of $CO_2$ emission in Korea is ranked 9th and the increasing rate of $CO_2$ emissions highest in the world, it is strongly necessary to devise methods to decrease the amount of $CO_2$ in each industry as the basis of establishing environmentally sustainable production system. This paper aims to identify the characteristics of $CO_2$ emissions from construction wastes throughout the simplified LCA (Life Cycle Assessment) and suggest the strategic guideline for the construction waste management plan to decrease $CO_2$. As a result of LCA on the case of a high-rise residential building project, total sum of $CO_2$ emission generated from construction wastes appeared as 6,818,123kg-$CO_2$ and $CO_2$ emission per unit floor area as 21.01kg-$CO_2/{\beta}{\ge}$. The principal waste materials generating more than 95% of $CO_2$ are materials such as reinforcing bar, temporary materials, cement, ready-mixed-concrete, concrete products, and tile, which have relatively high unit emission rate of $CO_2$ in the process of production. Besides, more than 92% of $CO_2$ was generated from the activities such as structure work, plaster work, temporary work, and tile and stone work, which are generally executed in the early phase of the whole construction period. Reflecting these results, the guideline for the construction waste management plan was recommended. If the waste management plan is established considering the guideline suggested, there would be high potential to decrease the amount of $CO_2$ generated from construction wastes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.7
• /
• pp.801-808
• /
• 2017

The present study investigated the protective effects of Bifidobacterium bifidum culture supernatants (BbSC) and intracellular cell-free extracts (BbICFE) on human dermal fibroblasts (HDFs) against ultraviolet-B (UV-B) irradiation. HDFs were treated with UV-B, UV-B+BbCS, and UV-B+BbICFE. Treatment of UV-B-irradiated HDFs with BbCS and BbICFE significantly increased cell viability compared to UV-B-irradiated HDFs. BbCS treatment reduced senescence in HDFs by approximately 40.0%. Moreover, sub-G1 phase was significantly reduced in BbCS- and BbICFE-treated HDFs (3.3% and 4.5%, respectively). The effect of UV-B on oxidative damage of HDFs was measured by dichlorofluorescin diacetate. Fluorescence intensity significantly increased in UV-B-irradiated HDFs. Inhibition of cellular reactive oxygen species in HDFs treated with 0.01% BbCS was the highest at 34.1%. Levels of p21 and p53 protein expression induced by UV-B irradiation were reduced by treatment with BbCS and BbICFE (47.0% and 35.6%, respectively). These results show that BbCS and BbICFE reduce UV-B-induced cellular senescence and apoptosis in HDFs. Thus, BbCS and BbICFE can be used as potential agents for protection of UV-B-induced skin cell damage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6C
• /
• pp.505-511
• /
• 2008

The global navigation satellite system (GNSS) is using a direct sequence/spread spectrum (DS/SS) modulation. In order to recover the information data, the DS/SS system first performs a two-step synchronization process: acquisition and tracking. The acquisition process adjusts the phase difference between the received and locally generated acquisition sequences within ${\pm}T_c/2$ or less, where $T_c$ is the chip period. The tracking process performs fine synchronization. In this paper, we focus on the tracking issue. The single delta delay locked loop($\Delta$-DLL) is the optimal tracking scheme for a GNSS in the absence of multipath signals, where $\Delta$ means the spacing between the early and late correlation time offset. In the multipath environments, however, the $\Delta$-DLL suffers from huge estimation bias(denoted by $\beta$) caused by distorted correlation values. Although some modified schemes such as a $\Delta$-DLL with a narrow $\Delta$ and a double delta DLL (${\Delta}^{(2)}$-DLL) were proposed to reduce the estimation bias, they cannot remove the estimation bias completely and need more accurate acquisition process. This paper proposes a novel tracking scheme that can dramatically reduce the estimation bias, using the maximum slope change among the correlation outputs.

• Current Photovoltaic Research
• /
• v.1 no.1
• /
• pp.38-43
• /
• 2013

$Cu(In,Ga)_3Se_5$ is a candidate material for the top cell of $Cu(In,Ga)Se_2$ tandem cells. This phase is often found at the surface of the $Cu(In,Ga)Se_2$ film during $Cu(In,Ga)Se_2$ cell fabrication, and plays a positive role in $Cu(In,Ga)Se_2$ cell performance. However, the exact properties of the $Cu(In,Ga)_3Se_5$ film have not been extensively studied yet. In this work, $Cu(In,Ga)_3Se_5$ films were fabricated on Mo-coated soda-lime glass substrates by a three-stage co-evaporation process. The Cu content in the film was controlled by varying the deposition time of each stage. X-ray diffraction and Raman spectroscopy analyses showed that, even though the stoichiometric Cu/(In+Ga) ratio is 0.25, $Cu(In,Ga)_3Se_5$ is easily formed in a wide range of Cu content as long as the Cu/(In+Ga) ratio is held below 0.5. The optical band gap of $Cu_{0.3}(In_{0.65}Ga_{0.35})_3Se_5$ composition was found to be 1.35eV. As the Cu/(In+Ga) ratio was decreased further below 0.5, the grain size became smaller and the band gap increased. Unlike the $Cu(In,Ga)Se_2$ solar cell, an external supply of Na with $Na_2S$ deposition further increased the cell efficiency of the $Cu(In,Ga)_3Se_5$ solar cell, indicating that more Na is necessary, in addition to the Na supply from the soda lime glass, to suppress deep level defects in the $Cu(In,Ga)_3Se_5$ film. The cell efficiency of $CdS/Cu(In,Ga)_3Se_5$ was improved from 8.8 to 11.2% by incorporating Na with $Na_2S$ deposition on the CIGS film. The fill factor was significantly improved by the Na incorporation, due to a decrease of deep-level defects.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.2
• /
• pp.236-242
• /
• 2005

To develop a new detection method using irradiation-induced volatile marker compounds of red pepper powder (RP), the volatile compounds of irradiated RP (0, 1, 3, 5, and 10 kGy) were analyzed by purge and trap (P&T)/solid phase microextraction (SPME)/gas chromatography/mass spectrometry (GC/MS) methods. A total of 51 and 31 compounds were detected in IRP by SPME and P&T methods, respectively. Among these, 25 compounds, which were composed of 4 hydrocarbons, 7 aldehydes, 1 ketone, 3 alcohols, 4 aromatic compounds, 2 esters and 4 miscellaneous compounds, showed irradiation dependent manner with significant positive correlation (p<0.01 or p<0.05) between irradiation dose and relative concentration. However, all compounds except 1,3-bis(1,1-dimethylethyl)benzene were not suitable as marker compounds because of their low determination coefficients ($R^2$<0.80) between irradiation dose and their concentrations, and detectablilty in nonirradiated sample. Therefore, only one compound, 1,3-bis(1,1-dimethylethyl)benzene, was tentatively identified as a volatile marker compound to detect irradiated RP.

• Clinical and Experimental Reproductive Medicine
• /
• v.15 no.2
• /
• pp.135-147
• /
• 1988

To compare the stimulation effect of the ratio in follicle stimulating hormone and luteinizing hormone in induction of multiple follicular growth, the serum $E_2$ level, the diameter of follicle, number of aspirated follicles and cleavage rate of in vitro fertilized preovulatory oocytes as well as the pregnancy rate were evaluated. Forty one patients with irreparable tubal disease were stimulated by hMG(n=24) or FSH/hMG(n=17) for the purpose of in vitro fertilization and embryo transfer. The following results were obtained. 1. Serum estradiol($E_2$) levels on the day of hCG administration were $921.0{\pm}353.3\;pg/ml$ in hMG group and $1272.9{\pm}1060.6\;pg/ml$ in FSH/hMG group. The serum $E_2$ value of hMG group was significantly lower than that of FSH/hMG group. 2. The diameter of leading follicle by ultrasonogram on the day of hCG administration were $16.2{\pm}2.0\;mm$ in hMG group and $16.2{\pm}2.6\;mm$ in FSH/hMG group. No significant difference of follicle diameter between two groups was demonstrated. 3. The number of follicles with diameter above 10 mm by sonogram on the day of hCG injection were $3.91{\pm}2.32$ in hMG group and $6.52{\pm}3.86$ in FSH/hMG group. There was significant difference of number of follicles between two groups, (p< 0.01). 4. The number of oocytes found per patient at aspiration were $2.59{\pm}1.00$ in hMG group and 3. $76{\pm}2.31$ in FSH/hMG group. There was significant difference of number of aspirated oocytes between two groups. (p< 0.05). 5. The detection rate of preovulatory oocyte at aspiration were 68.4%(39/57) in hMG group (n=22) and 77.6%(38/49) in FSH/hMG group (n=13). 6. The cleavage rate of preovulatory oocyte at 44 hours after insemination were 74.4%(29/39) in hMG group(n=22) and 81.6%(31/38) in FSH/hMG group (n=13). When only hMG was used, one pregnancy was established in 15 patients to whom 29 zygotes were transferred. And a full term normal female baby was delivered by elective cesarean section. In the FSH/hMG group, five pregnancies out of 9 transferred patients were confirmed by serum ${\beta}-hCG$. Two pregnancies were spontaneously aborted before the 6th week of pregnancy. One patient aborted her baby at the 18th week of pregnancy because of incompetent internal os of the cervix. Two patients delivered two full term babies by elective cesarean section. From the above findings, paralell with the increase in the ratio of exogenous follicle stimulating hormone to luteinizing hormone, an increase in oocyte recovery was observed as well as an improvements in pregnancy rate. It was concluded that FSH enrichment early in the follicular phase had a beneficial effect in the controlled ovarian hyperstimulation.

• Proceedings of the Ginseng society Conference
• /
• 1988.08a
• /
• pp.122-128
• /
• 1988

Several major polyacetylene compounds were isolated from the petroleum-ether fraction of fresh Korean ginseng roots through solvent fractionation. partition and silica gel column chromatography. Further separation of acetylenic compounds was accomplished by bonded normal phase HPLC utilizing a moderately nonpolar microparticulate column. The preparative separation for the various spectral measurements was carried out by low pressure preparative liquid chromatography. The chemical structure of these polyacetylenes separated was determined by UV. IR/FTIR. $^{1}H$ NMR. mass spectral and elemental analysis. These are identified to be heptadeca-1-en-4.6-diyn-3.9.l0.-triol [1] heptadeca-1.9-dien-4.6-diyn-3-ol. heptadeca-1.8-dien-4.6-diyn-3.10-diol and the 4th was denatured polyacetylene. heptadeca-1.4-dien-6.8-diyn-3.10-diol. Two different p-substituted benzoates of panaxynol were synthesized for the determination of exciton chirality. The circular dichroism spectra in the UV region show that panaxynol p-bromobenzoate and p-dimethyl-aminobenzoate constitute negative exciton chirality [2]. Isolated major polyacetylene compounds were irradiated in aerated solution with 300 nm UV light to obtain the oxidized product at the allylic alcohol center to corresponding carbonyl compounds such as heptadeca-1-en-4.6-diyn-9.10-diol-3-one and heptadeca-1.9-dien-4.6-diyn-3-one. These photooxidation compounds have en-on-diyne chromophore and undergo nucleophilic addition reaction with methanol to yield ${\beta}-methoxy$ carbonyl compounds such as heptadeca-9-en-4.6-diyn-1-methoxy-3-one and heptadeca-4.6-diyn-1-methoxy-9.10-diol-3-one.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.6
• /
• pp.283-288
• /
• 2019

MCrAlY overaly coatings are used as oxidation barrier coatings to prevent degradation of the underlying substrate in high temperature and oxidizing environment of the hot section of gas turbines. Therefore, oxidation resistance in high temperature is important property of MCrAlY coatings. Also, coefficients of thermal expansion (CTE) of MCrAlY have middle value of that of Ni-based superalloys and oxides, which have the effect of preventing the delamination of the surface oxides. Cyclic oxidation test is one of the most useful methods for evaluating the high temperature durability of coatings used in gas turbines. In this study, NiCoCrAlY overlay coatings were formed on Inconel 792(IN 792) substrates by vacuum plasma spraying process. Vacuum plasma sprayed NiCoCrAlY coatings and IN 792 susbstrates were exposed to 1000℃ one-hour cyclic oxidation environment. NiCoCrAlY coatings showed lower weight gain in short-term oxidation. In long-term oxidation, IN 792 substrates showed higher weight loss due to delamination of surface oxide but NiCoCrAlY coatings showed lower weight loss. X-ray diffraction (XRD) analysis showed α-Al2O3 and NiCr₂O₄ was formed during the cyclic oxidation test. Through cross-section observation using scanning electron microscopy (SEM) and electron back scatter diffraction (EBSD) analysis, thermally grown oxide (TGO) layer composed of α-Al₂O₃ and NiCr₂O₄ was formed and the thickness of TGO increased during 1000℃ cyclic oxidation test. β phase in upper side of NiCoCrAlY coating was depleted due to oxidation of Al and outer beta depletion zone thickness also increased as the cyclic oxidation time increased.