• 제목/요약/키워드: ${\beta}$"-Al2O3

검색결과 245건 처리시간 0.027초

Spray Dry한 ${\beta}$-SiC-$TiB_2$ 도전성(導電性) 세라믹 복합체(複合體)의 특성(特性) (Properties of ${\beta}$-SiC-$TiB_2$ Electrocondutive Ceramic Composites by Spray Dry)

  • 신용덕;주진영;최광수;오상수;이동윤;임승혁
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 C
    • /
    • pp.1538-1540
    • /
    • 2003
  • The composites were fabricated respectively 61vol.% ${\beta}$-SiC and 39vol.% $TiB_2$ spray-dried powders with the liquid forming additives of 12wt% $Al_2O_3+Y_2O_3$ by pressureless annealing at $1700^{\circ}C,\;1750^{\circ}C\;1800^{\circ}C$ for 4 hours. The result of phase analysis of composites by XRD revealed ${\alpha}$-SiC(6H), $TiB_2$, and YAG($Al_5Y_3O_{12}$) crystal phase. The relative density, the Young's modulus and fracture toughness showed respectively the highest value of 92.97%, 92.88Gpa and $4.4Mpa{\cdot}m^{1/2}$ for composites by pressureless annealing temperature $1700^{\circ}C$ at room temperature. The electrical resistivity showed the lowest value of $8.09{\times}10^{-3}{\Omega}{\cdot}cm$ for composite by pressureless annealing tempe rature $1700^{\circ}C$ at $25^{\circ}C$. The electrical resistivity of the SiC-$TiB_2$ composites was all positive temperature cofficient resistance (PTCR) in the temperature ranges from $25^{\circ}C$ to $700^{\circ}C$.

  • PDF

로소나이트(Lawsonite)의 압력에 따른 등방성 압축거동 연구 (Isotropic Compression Behavior of Lawsonite Under High-pressure Conditions)

  • 임준혁;이용재
    • 자원환경지질
    • /
    • 제49권1호
    • /
    • pp.23-30
    • /
    • 2016
  • 자연산 로소나이트(Ca-Lawsonite, $CaAl_2Si_2O_7(OH)_2{\cdot}H_2O$) 분말의 압력증가에 따른 변화와 구조적 특성을 소형 압력 발생장치인 다이아몬드 앤빌셀과 실시간 싱크로트론 X-선 회절실험을 통하여 확인하였다. 본 연구에서 시료에 적용한 압력은 1 기압에서 8 GPa 까지였으며 메탄올, 에탄올, 물의 혼합 용액을 압력 매개체로 하여 상온조건에서 실험하였고, 특이한 상전이나 압력하 부피변화의 이상현상은 발견되지 않은 가역적 압축특성을 관찰하였다. 최고압력까지 로소나이트는 결정성을 잃지 않는 것으로 확인되었고 압력증가에 따른 체적감소를 통해 체적탄성률($B_0$)을 계산해 본 결과 146(6) GPa로 도출되었다. 체적탄성률과 함께 계산된 선형압축률은 a-, b-, c-축에서 각각 0.0022, 0.0024, $0.0020GPa^{-1}$로 압력에 의한 부피감소는 대체적으로 3축이 같은 비율로 감소하는 것을 확인하였다.

팔물군자탕(八物君子湯) Cytochrome P450 효소(酵素) 활성에 미치는 영향 (The Effects of Palmulgunja-tang(八物君子湯)Enzyme Activity on Cytochrome P450 Isozyme)

  • 류정만;박성식
    • 사상체질의학회지
    • /
    • 제17권2호
    • /
    • pp.64-73
    • /
    • 2005
  • 1. Objectives The purpose of this study was to investigate the effects of the enzyme activity of Palmulgunja-tang with administered orally solution on cytochrome P450 isozyme 2. Methods This study was carried on through following methods. We treated the rat with the {3-naphthoflavone (${\beta}NF$) of 80mg/kg for 3 days i.p injection. Firstable, microsomal protein was separated and total intracellular protein test was done. Then GOT and GPT were measured and assay of cytochrome P450 IAI/2 enzyme activity was performed according to the method of EROD and MROD. (Ethoxyresorufin-O-deethylase(EROD) activity was used to measure cytochrome P450 lAI activity and methoxyresorufin O-demethylase(MROD) activity was used to measure cytochrome P450 lA2 activity. ) 3. Results and Conclusions 1) PGT recovered the liver damage on ${\beta}NF$ inducible CYP IAI/2 by pre-post and high-low condition. 2) At concentration of post-treated 50mg!kg of PGT, the inhibiting of $\betaNF$ metabolites to liver of rat cytochrome P450 lAl was inhibited by 53.0% respectively. 3) PGT showed 36.0% inhibition of ${\beta}NF$-induced lA2 activity at the concentration post-treated 50mg/kg.

  • PDF

용체화처리된 주조용 Mg-8%Al-X%Zn 합금의 부식 거동 (Corrosion Behavior of Solution-Treated Mg-8%Al-X%Zn Casting Alloys)

  • 전중환;황인제
    • 열처리공학회지
    • /
    • 제28권3호
    • /
    • pp.126-133
    • /
    • 2015
  • The aim of this study is to investigate the effect of solution treatment on the corrosion behavior of Mg-8%Al-(0-1)%Zn casting alloys in 1M NaCl aqueous solution. After the solution treatment, all alloys showed single ${\alpha}$-(Mg) phase microstructure by dissolution of ${\beta}(Mg_{17}Al_{12})$ phase into the ${\alpha}$-(Mg) matrix. The $H_2$ evolution volume decreased with an increase in Zn content, which indicates that the addition of Zn plays a beneficial role in decreasing corrosion rate of the Mg-Al-Zn alloy in solution-treated state. The microstructural evaluations on the corrosion products and corroded surfaces after the immersion test in 1 M NaCl solution revealed that the incorporation of more $Al_2O_3$ and ZnO into the corrosion product, by which the penetration of $Cl^-$ ions is impeded, are thought to be responsible for the better corrosion resistance in relation with the Zn addition.

하동카올린으로부터 $\beta$-Sialon의 합성 (Synthsis of $\beta$-Sialon from Hadong Pink Kaolin)

  • 이홍림;이형직
    • 한국세라믹학회지
    • /
    • 제21권1호
    • /
    • pp.11-18
    • /
    • 1984
  • $eta$-Sialon synthesis was investigated via the simultaneous reduction and nitridation of Hadong Pink Kaolin using the graphite as a reducing agent at 135$0^{\circ}C$ under 80% $N_2-20%H_2$ atmosphere. When Hadong Pink Kaolin-graphite-silicon nitride seed(molar ratio ; $SiO_2:C:Si_3N_4$=1;3.5:0.05) mixture was heated at 135$0^{\circ}C$ for as long as 20h in 80%$N_2-20%H_2$ atmosphere a homogeneous $eta$-Sialon$(Si_{3.5}Al_{2.5}O_{2.5}N_{2.5})$ was mainly formed together with a small amount of $\alpha$-$Si_3N_4$.

  • PDF

제올라이트 Beta, USY, Mordenite 촉매를 이용한 Methylnaphthalene의 트랜스메틸화 반응 (Transmethylation of Methylnaphthalene Over Beta, USY and Mordenite Zeolite Catalysts)

  • 박중남;박용기;백진욱;홍석인;이철위
    • Korean Chemical Engineering Research
    • /
    • 제43권5호
    • /
    • pp.560-565
    • /
    • 2005
  • 1-methylnaphthalene(1-MN)과 2-methylnaphthalene(2-MN) 사이에서의 트랜스메틸화 반응을 제올라이트, H-mordenite(HM), H-Beta$(H{\beta})$, H-USY(HUSY) 촉매를 이용한 고정층 반응기에서 수행하였다. $H{\beta}_{25}(SiO_2/Al_2O_3=25)$ 촉매는 다음과 같은 조건, 반응온도 $350^{\circ}C$, 반응압력 1.5 Mpa, 전체 액상 반응물의 WHSV $2.7g_{feed}/g_{cat}{\cdot}h$, 반응물 1-MN과 2-MN의 몰비 1:1, 반응 1시간에서 2-MN/1-MN 비=2.3와 2,6-DMN/2,7-DMN 비=1.3을 보이면서 다른 촉매보다 높은 전환율과 안정성을 나타내었다. 촉매의 세공구조, 산성도와 관련하여 촉매성능을 해석하였다.

Effect of Increased Oxygen Content due to Intensive Milling on Phase and Microstructural Development of Silicon Nitride

  • Kim, Hai-Doo;Ellen Y. Sun;Paul F. Becher;Kim, Hyo-Jong;Han, Byung-Dong;Park, Dong-Soo
    • 한국세라믹학회지
    • /
    • 제38권5호
    • /
    • pp.405-411
    • /
    • 2001
  • Compacts of a mixture of fine $\alpha$-Si$_3$N$_4$powders, 6% $Y_2$O$_3$and 1% $Al_2$O$_3$were attrition milled time on phase and microstructural development in silicon nitride ceramics. The sintered surface and the interior showed different behaviors in phase and microstructral developments. Increased oxygen content with increased milling time of powder mixture leads to the formation of Si$_2$$N_2$O phase at temperatures as low as 155$0^{\circ}C$. Si$_2$$N_2$O is stable in the interior of the samples but unstable in the surface region of the specimen sintered at higher temperature. This results in a duplex structure where the interior consists of Si$_2$$N_2$O grains dispersed in $\beta$-Si$_3$N$_4$matrix and a surface which contains only $\beta$-Si$_3$N$_4$. The alpha to beta phase transformation and the microstructural development are shown to be influenced by the formation and decomposition of the Si$_2$$N_2$O.

  • PDF

시알론을 첨가한 탄화규소 세라믹스의 제조 (Preparation of Silicon Carbide with Sialon)

  • 이종국;박종곤;이은구;김환
    • 한국세라믹학회지
    • /
    • 제37권3호
    • /
    • pp.247-255
    • /
    • 2000
  • Silicon carbide with sialon was prepared by hot pressing and transient liquid-phase sintering, and the effects of sintering atmosphere and starting phases on their microstructural characteristics were investigated. The sintered SiC with Sialon composition(Y2O3, AlN, Si3N4) in argon atmosphere had high sintered density and large aspect ratio. But sintered specimens in nitrogen atmosphere showed low aspect ratio and small grian size, becuase of the retardation of phase transformation and grain growth. Addition of Y-Sialon powder to SiC also retarded the phase transformation to ${\alpha}$-SiC from ${\beta}$-SiC and densification. The SiC specimen prepared from the starting ${\beta}$-SiC powder with Sialon composition(Y2O3, AlN, Si3N4) showed the highest fracture toughness about 6.0 MPa$.$m1/2.

  • PDF

Nanoceramic and Polytetrafluoroethylene Polymer Composites for Mechanical Seal Application at Low Temperature

  • Okhlopkova, A.A.;Sleptsova, S.A.;Alexandrov, G.N.;Dedyukin, A.E.;Shim, Ee Le;Jeong, Dae-Yong;Cho, Jin-Ho
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권5호
    • /
    • pp.1345-1348
    • /
    • 2013
  • We investigated the tribochemical and wear properties of Polytetrafluoroethylene (PTFE) based polymer matrix composites with nanoceramic (NC) ${\beta}$-sialon, and $Al_2O_3$ particles for the mechanical seal applications at low temperature. SEM showed that NC particles were homogeneously distributed in the polymer matrix and initiated the formation of the supramolecular spherulites around NC. From the temperature stimulated depolarization (TSD) current results, it was analyzed that the surface charge on nanoceramic affected the formation of the spherulites structure. 2 wt % $Al_2O_3$ NC did not degrade the mechanical properties of PTFE so that composites showed the similar values of tensile strength, elongation at the rupture and friction coefficient as those of neat PTFE. However, the composite with 2 wt % $Al_2O_3$ NC revealed the improved wear resistance, wear rate of 0.4-1.2 mg/h at room temperature and 0.28 mg/h at $-40^{\circ}C$, respectively, while the neat PTFE the 70-75 mg/h at room temperature and 70.3 mg/h at $-40^{\circ}C$.

가시광 스펙트럼 영역에서 선택적인 투과와 내열충격성을 갖는 LAS계 글라스세라믹의 특성 (Characteristics of glass-ceramics of LAS system having high thermal shock resistance and selective transparency in visible region of spectrum)

  • 변우봉
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 C
    • /
    • pp.1565-1567
    • /
    • 2003
  • LAS($Li_2O-Al_2O_3-SiO_2$)계에 전이금속과 희토류 이온을 첨가한 글라스세라믹의 colouring에 대한 특성 분석이 이루어졌다. 투과성이 높고, 내열 충격성이 우수한 글라스세라믹을 제조한 수 있었으며, 주 결정상은 ${\beta}$-eucryptite(SS)이었다. 또한 colouring에 의한 빛의 흡수 특성과 이러한 글라스세라믹에서의 colouring 이온의 구조적 상태가 조사되었다.

  • PDF