• Korean Journal of Radiology
• /
• 제21권6호
• /
• pp.736-745
• /
• 2020

Objective: To identify the initial chest computed tomography (CT) findings and clinical characteristics associated with the course of coronavirus disease 2019 (COVID-19) pneumonia. Materials and Methods: Baseline CT scans and clinical and laboratory data of 72 patients admitted with COVID-19 pneumonia (39 men, 46.2 ± 15.9 years) were retrospectively analyzed. Baseline CT findings including lobar distribution, presence of ground glass opacities, consolidation, linear opacities, and lung severity score were evaluated. The outcome event was recovery with hospital discharge. The time from symptom onset to discharge or the end of follow-up (for those remained hospitalized) was recorded. Data were censored in events such as death or discharge without recovery. Multivariable Cox proportional hazard regression was used to explore the association between initial CT, clinical or laboratory findings, and discharge with recovery, whereby hazard ratio (HR) values < 1 indicated a lower rate of discharge at four weeks and longer time until discharge. Results: Thirty-two patients recovered and were discharged during the study period with a median length of admission of 16 days (range, 9 to 25 days), while the rest remained hospitalized at the end of this study (median, 17.5 days; range, 4 to 27 days). None died during the study period. After controlling for age, onset time, lesion characteristics, number of lung lobes affected, and bilateral involvement, the lung severity score on baseline CT (> 4 vs. ≤ 4 [reference]: adjusted HR = 0.41 [95% confidence interval, CI = 0.18-0.92], p = 0.031) and initial lymphocyte count (reduced vs. normal or elevated [reference]: adjusted HR = 0.14 [95% CI = 0.03-0.60], p = 0.008) were two significant independent factors that influenced recovery and discharge. Conclusion: Lung severity score > 4 and reduced lymphocyte count at initial evaluation were independently associated with a significantly lower rate of recovery and discharge and extended hospitalization in patients admitted for COVID-19 pneumonia.

• The Korean Journal of Pain
• /
• 제13권1호
• /
• pp.31-37
• /
• 2000

Background: Recent studies suggested that a preoperative block of N-methyl-D-aspartate (NMDA) receptors with NMDA antagonists may reduce postoperative pain. In this double-blind study, magnesium sulfate, a natural NMDA receptor antagonist, was administered preoperatively to investigate the effects of magnesium sulfate on postoperative pain and pulmonary function. Methods: Seventy patients who were to undergo gastrectomy under general anesthesia were randomly assigned to one of three groups. Groups 2 and 3 received intravenous magnesium, preoperatively (Group 2: 50 mg/kg bolus, 7.5 mg/kg/hr for 20 hr, Group 3: 50 mg/kg bolus, 15 mg/kg/hr for 20 hr). Group 1 received normal saline as the control group. Visual analog scale (VAS) for postoperative pain and mood, cumulative analgesic consumption, recovery of pulmonary function and side effects were evaluated at 6, 24, 48 and 72 hours after the operation. Results: In Groups 2 and 3, plasma concentration of magnesium were significantly higher than in Group 1 at 6 and 20 hours after infusion (P<0.05). There were no significant differences in the analgesic consumption, and recovery of pulmonary function and the incidence of side effects at 6, 24, 48 and 72 hours after the operation among the three groups. In Group 3, pain scores at rest measured 24 and 48 hours after operation were lower than the control group, and pain scores when deep breathing were significantly lower than the control group at postoperative 6, 24, 48, and 72 hours. Conclusions: We conclude that intravenous infusion of greater amount of magnesium has little effectiveness in reducing postoperative pain. However, further studies are needed to characterize the clinical significance of these effects on postoperative pain.

• 청정기술
• /
• 제15권4호
• /
• pp.287-294
• /
• 2009

DME (dimethyl ether, $CH_3OCH_3$) 직접합성 반응기로부터 생산되는 DME 혼합물(DME: 19~20 mol%)을 DME 흡수탑과 DME 정제탑 장치 2기를 사용하여 대체연료로 사용할 수 있는 순도로 분리하였다. DME 흡수탑에서는 메탄올을 세정용매로 사용하였고 운전압력 50 bar내에서 원료 중 DME를 탑 하부로 99% 이상 회수하는 것을 목적으로 하였으며, 이를 위해 실험실 규모의 실험장치를 통해 얻은 실험식을 사용하여 운전압력 50 bar내에서 DME를 99% 회수하기 위해 필요한 메탄올의 유량을 산출하였다. 그리고 95 wt% 이상의 DME 순도를 얻기 위해 DME 정제탑을 사용하였으며, 경질 생성물(이산화탄소, 질소 등)이 소량(5~10 mol%)이고, 중간생성물(DME)의 양(20~30 mol%)이 적지 않은 것을 감안하여 측면흐름(4단)의 액상 생성물로서 최대 98.2 wt% 순도의 DME를 얻었다.

• Journal of Microbiology and Biotechnology
• /
• 제18권4호
• /
• pp.663-669
• /
• 2008

The solvent-tolerant bacterium Enterobacter sp. VKGH12 is capable of utilizing n-butanol and contains an $NAD^+$-dependent n-butanol dehydrogenase (BDH). The BDH from n-butanol-grown Enterobacter sp. was purified from a cell-free extract (soluble fraction) to near homogeneity using a 3-step procedure. The BDH was purified 15.37-fold with a recovery of only 10.51, and the molecular mass estimated to be 38 kDa. The apparent Michaelis-Menten constant ($K_m$) for the BDH was found to be 4 mM with respect to n-butanol. The BDH also had a broad range of substrate specificity, including primary alcohols, secondary alcohols, and aromatic alcohols, and exhibited an optimal activity at pH 9.0 and $40^{\circ}C$. Among the metal ions studied, $Mg^{2+}$ and $Mn^{2+}$ had no effect, whereas $Cu^{2+},\;Zn^{2+}$, and $Fe^{2+}$ at 1 mM completely inhibited the BDH activity. The BDH activity was not inhibited by PMSF, suggesting that serine is not involved in the catalytic site. The known metal ion chelator EDTA had no effect on the BDH activity. Thus, in addition to its physiological significance, some features of the enzyme, such as its activity at an alkaline pH and broad range of substrate specificity, including primary and secondary alcohols, are attractive for application to the enzymatic conversion of alcohols.

• 한국결정성장학회지
• /
• 제31권1호
• /
• pp.32-36
• /
• 2021

본 연구는 레이저 침탄된 TiZrN 코팅층의 탄소확산거동 측면과 이에 따른 기계적 특성 변화를 연구·고찰하였다. TiZrN 코팅에 탄소페이스트를 도포한 후, 레이저를 조사하여 침탄시켰다. 침탄 이후에 (111)상에 해당하는 XRD 피크가 저각으로 이동하여, 도핑된 탄소에 의한 격자팽창을 보여주었다. 아울러, 투입된 탄소의 입계 확산에 의한 결정립의 크기가 감소하였다. 침입된 탄소의 결합상태를 확인하기 위한 XPS 분석결과, 레이저의 열에너지를 통해 탄소가 TiZrN내 질소 원자와 치환되어 탄화물(TiC 또는 ZrC)을 보였다. 아울러, sp2와 sp3 혼성화 결합이 혼재하는 상태를 보여 비정질 탄소가 형성된 것을 확인할 수 있었다. 침탄 전후 TiZrN 코팅층의 단면 TEM 이미지와 inverse FFT 분석결과, 격자 중간에 물결형상이 관찰되어 결정립계 내 비정질 상의 형성을 보여주었다. 침탄 후 경도는 34.57 G Pa에서 38.24 G Pa로 증가하였으며, 마찰계수는 83 % 감소하였다. 특히, 외부 하중에 저항하는 지표로 활용되는 H/E는 0.11에서 0.15으로 증가하였고 wear rate는 65 % 개선되는 것을 확인할 수 있었다.

• 대한정형도수물리치료학회지
• /
• 제23권1호
• /
• pp.43-51
• /
• 2017

Background: This study was carried out to compare the effects of shoulder stabilization exercise and thoracic extension exercise including deep neck flexor exercise on posture and pain targeting physical therapists and occupational therapists with forward head posture. Methods: A total of 30 physical therapists and occupational therapists (15 males, 15 females), who are working in the nursing hospital at Daejeon, were randomly divided into a shoulder stabilization group (n=10), a thoracic extension exercise (n=10), and a control group (n=10), and 3 times were carried out for 8 weeks. Results: In the results of all measurements, 2 groups except for the control group showed a significant change in the recovery of forward head posture, and the should stabilization exercise group showed a relatively superior effect compared to the thoracic extension exercise group. Conclusions: These results of a study will be a basic data for the development of the forward head posture exercise therapy program.

• Horticulture, Environment, and Biotechnology : HEB
• /
• 제59권6호
• /
• pp.775-786
• /
• 2018

To test the hypothesis that humic acid (HA), anaerobically digested pig slurry filtrate (APS), and their combination would differently affect the chemical speciation and extractability of metals (cadmium, copper, and zinc) and their uptake by plants, we conducted a pot experiment using wormwood in two texturally contrasting soils (sandy loam and clay loam) collected from a field near an abandoned Cu mine. Four treatments were laid out: HA at $ 23.5g\;kg^{-1}$ (HA), APS at $330mL\;kg^{-1}$ (APS), HA at $ 23.5g\;kg^{-1}$ and APS at $330mL\;kg^{-1}$ (HA + APS), and a control. Each treatment affected the chemical speciation and mobility of the metals, and thereby resulting in variable patterns of plant biomass yield and metal uptake. The APS supported plant growth by increasing nutrient availability. HA supported or hindered plant growth by impacting the soil's water and nutrient retention capacity and aeration, in a soil texture-dependent manner, while consistently enhancing the immobilization of heavy metals. Temporal increases in whole-plant dry matter yield and metal accumulation suggested that the plants were capable of metal hyperaccumulation. The results were discussed in terms of the mobility of metals and plant growth and corroborated by the $^{15}N$ recovery of soil- and plant-N pools under H and HS treatments. Therefore, for effective phytoremediation of polluted soils, an appropriate combination of plant growth promoters (APS) and chelating agents (HA) should be predetermined at the site where chemical stabilization of pollutants is desired.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Chest Surgery
• /
• 제34권6호
• /
• pp.454-464
• /
• 2001

배경: 개심술 시 체외순환회로 및 산화기의 합성표면에 대한 혈액의 접촉은 백혈구를 활성화시켜 전신 염증 반응을 일으키며, 활성화된 백혈구에 의해 생성된 산소유리기는 수술 후 심장 및 폐기능 손상의 주요 원인이 된다. 저자들은 체외순환동안 백혈구 제거필터 사용에 따른 임상효과를 평가하기 위해 본 연구를 실시하였다. 대상 및 방법: 성인 심장질환 환자 30명을 대상으로 백혈구 제거필터를 체외순환 회로에 포함시켜 수술한 필터군(n=15)과 필터를 사용하지 않은 대조군(n=15)으로 분류한 뒤, 테외순환 동안 말초혈액 내 백혈구 및 혈소판 수의 변화, 체외순환 전과 후의 관상정맥동혈액 내 malondialdehyde(MDA), troponin-T(TnT), 5'-nucleotidase(5'-NT의 농도변화, 대동맥 교차차단 해제 후 심박동 자연회복률, 수술 전과 후의 심장지수 및 폐혈관 저항의 변화, 수술 후 출혈량, 혈액제제 사용량과 창상 합병증 발생률 등을 양 군간에 비교하였다. 결과: 체외순환 종료 시 총 백혈구 수는 필터군이 대조군에 비해 유의하게 낮았으나(9,567$\pm$842/㎣ vs 13,573$\pm$1,167/㎣, p<0.01), 혈수판 수는 양 군간에 차이가 없었다(138,133$\pm$10,519/㎣ va 156,733$\pm$10,735/㎣, p=0.22). 수술 직후 관상정맥동 혈액내 MDA(3.78$\pm$0.31$\mu$mo1/L vs 5.86$\pm$0.65$\mu$mo1/L, p<0.01), TnT(0.40$\pm$0.04 ng/mL vs 0.59$\pm$0.08 ng/mL, p<0.05), 그리고 5'-NT(3.88$\pm$0.61 U/L vs 5.08 $\pm$0.90 UL, p<0.05) 등의 활성도는 필터군이 대조군 보다 더 낮았다(p<0.05). 수술후 심장지수는 필터군이 대조군보다 높았고(3.26$\pm$0.18 L/$m^2$/min vs 2.75$\pm$0.17 L/$m^2$/min, p=0.05), 폐혈관 저항은 필터군이 대조군 보다 낮았다(65.87$\pm$7.59 dyne/sec/ $cm^{5}$ vs 110.80$\pm$12.22 dyne/sec/$cm^{5}$ , p.0.01). 수술 후 심박동 자연회복률은 필터군이 대조군 보다 높았고(12명 vs 8명, p<0.05), 수술 후 창상합병증 발생률은 필터군이 대조군보다 낮았다(1명 vs 4명, p<0.05). 수술 후 첫 24시간 출혈량은 필터군이 대조군보다 많았다.(614$\pm$ 107 mL vs 380$\pm$71 mL, p=0.05).

• Journal of Microbiology and Biotechnology
• /
• 제11권2호
• /
• pp.275-280
• /
• 2001

Bacteriocin J105 is a proteinaceous inhibitory substance produced by Latococcus latis subsp. lactis j105 isolated from Kimchi. Bacteriocin J105 was purified to homogeneity by the pH-dependent adsorption-desorption method and reverse-phase HPLC from the culture broth of Lactococcus lactis subsp. lactis J105. Purification of bacteriocin J105 resulted in a 1.47-fold increase in the specific activity and the recovery was 1.5%. Its molecular mass measured by the electrophoretic pattern in the sodium, dodecyl sulfate polyacrylamide gel was about 3.4 kDa. It was stable at $121^{\circ}C$ for 15 min at pH between 2 and 4. However, at pH above 5, bacteriocin was rapidly inactivated. Twenty-one residues from the N-terminal portion of bacteriocin J105 were sequenced using sequence analysis of lantibiotics. Bacteriocin J105 showed significant homology with known nisin A from lactic acid bacteria.