• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.140-141
• /
• 2002

In proto-type microactuators driven by magnetostrictive Tb-Fe thin films, the deflection was observed to be much smaller than that expected from large-sized "standard" Tb-Fe thin films. A striking difference was observed when the results from a thin substrate of 28 $\mu\textrm{m}$ for microactuator applications were compared with those from a standard substrate. At a standard substrate thickness (several hundred $\mu\textrm{m}$), an amorphous phase was formed and the coercivity was low being 80 Oe. (omitted)

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2001년도 학술논문발표회
• /
• pp.82-87
• /
• 2001

The purpose of this study is for the active use of the fly ash, which is a by-product of the combustion pulverizes coal thermal power plants, to compensate for the lack of landfill and for conservation of energy, by using fly ash as the supplementary cementitious material, and to prove its possibility as the related products of the cement. First of all, the ordinary fly ash is grinded in a special method and its fineness is controlled from 6000$\textrm{cm}^2$/g to 8000$\textrm{cm}^2$/g, then replaced it with the 10% to 80% of the cement mortar in order to test physics characteristics. The first experiment conducts on the strength development in fly ash replacing content and fineness. and the changes of the flow values, incorporating fly ash into cement. The second one is about the slow development of the strength of the fly ash mortar in early ages, and improves its strength with the activator $Na_{2}SO_{4}$, using high volume fly ash.

• 한국표면공학회지
• /
• 제26권5호
• /
• pp.263-270
• /
• 1993

The effects of surfactants on electorless copper plating bath for PCB was studied. Basic bath composition was cuplic sulfate 10g/l, EDTA.2Na 40 g/l, formalin$ 3m\ell$/l and sodium hydroxide solution for pH adjust. After addition of accelerators, stabilizers and surfactants, the polarization curves in plating bath were carried out for presumption of the plating rate. From the plating rate in bath with the various concentration of additives, the optimum condition for manufacturing the electroless copper plating bath was confirmed. It was found that the addition of $\alpha$.$\alpha$'-dipyridyl, pyridine and polyxyethylene octylphenylether was good as stabilizer, accelerator and surfactants, respectively. With this additives, the maximum plating rate of $12\mu\textrm{m}$/h at $65^{\circ}C$ and $2\mu\textrm{m}$/h at $25^{\circ}C$ was obtained.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.158-159
• /
• 2000

본 논문에서는 BK7 유리 기판에 Ag$^{+}$-$Na^{+}$ 이온교환법을 이용하여 1.31/1.55$mu extrm{m}$ 방향성 광결합기형 역다중화기를 제작하여 특성을 평가하였다. BK7에 이온교환법을 이용하여 도파로를 제작할 경우 0.2dB/cm 이하의 전파손실을 유지할 수 있으며 또한 도파로의 굴절율 분포가 단일모드 광섬유와 매우 유사하여 광섬유와 광소자 사이의 접합면에서 발생하는 접합손실을 줄일 수 있다 또한 BK7을 이용하면 도파로를 제작하였을 때 복굴절 현상이나 편광 의존성이 적어서 수동 소자 제작에 유용하다는 장점이 있다$^{(1 3)}$ . (중략)

• Journal of Oral Medicine and Pain
• /
• 제21권2호
• /
• pp.207-224
• /
• 1996

This study was designed to determine the most effective concentration of fluoride and energy density of laser irradiation for the anticarious effect. For this study surface hardness in enamel was measured before and after irradiation with pulsed Nd;YAG laser and the topical application of fluoride. Of the permanent mandibular anterior hovine teeth, healthy, carious free ones were used. Three hundred specimens were made. Specimens within 25~45 Vickers hardness numbers were assigned to 20 control and experimental stoops ; each containing 15 specimens. After forming artificial carious lesions, 10 J/$\textrm{cm}^2$, 20 J/$\textrm{cm}^2$, and 30 J/$\textrm{cm}^2$ energies were irradiated on the enamel surface of each experimental group. Also NaF, NH4F, Elmex gel(amine fluoride) and APF gel fluoride compounds were applied topically. Next, all the specimens were placed into the pH circulatory procedures for eight days. Vickers hardness numbers were measured using a microhardness tester. Surface changes of the enamel were observed using an scanning electron microscope. The comparative ana1ysis yielded the following results : 1. The reduction of surface hardness of the enamel surface was less in all groups with fluoride application than in the group without fluoride application. 2. The APF gel croup with 10 J/$\textrm{cm}^2$ irradiation showed the lowest reduction of surface hardness. 3. The reduction of surface hardness of the enamel surface in the group of laser irradiation without fluoride application not showed any significant difference according to the energy density of the laser. 4. Under the scanning electron microscope, in enamel irradiated with 10J/$\textrm{cm}^2$ showed appearance similar to acid etching surface. In enamel irradiated with 20 J/$\textrm{cm}^2$, line enamel crack was detected. In enamel irradiated with 30j/$\textrm{cm}^2$, severe enamel crack and fusion of enamel were detected. These results suggest that one could obtain the best anticariogenic effects without damage to teeth in the group of application of APF gel after laser irradiation with 10 J/$\textrm{cm}^2$.

• 한국가금학회지
• /
• 제12권1호
• /
• pp.25-30
• /
• 1985

가금에서의 영양소리용성에 미치는 볏짚구성분의 영향을 고찰하기 위하여 증류수 혹은 0.25N NaClO$_2$ 800$m\ell$당 볏짚 100g의 비율로 침지하여 135$^{\circ}C$ 3.2kg/$\textrm{cm}^2$ 압력밑에서 각각 30, 60 및 120분 autoclave를 이용하여 가열하고 세척 건조(증류수 혹은 NaClO$_2$-30, 60 및 120-볏짚) NDF, ADF 및 리그닌량을 조사하였다. 갓부화한 단관백색 레그흔 숫병아리에 10일간 시판 병아리 사료를 급여하고 계속해서 8일간 밀기울(기초), 섬유소(선분), 무처리볏짚, 증류수-30-볏짚 및 NaClO$_2$-30-볏짚이 각각 17.0% 함유된 실험사료를 급여했다. 증류수-30, 60 및 120-볏짚의 건물손실율은 각각 9.7, 12.1 및 13.3%였으나, NaClO$_2$-30, 60 및 120-볏짚에서는 각각 8.8, 18.7 및 19.4%로, NaClO$_2$-60 및 120-볏짚에서는 증류수볏짚의 1.5배가 되었다. 증류수 및 NaClO$_2$ 볏짚의 건물손실은 주로 무처리볏짚의 세포내용물과 헤미셀루로스의 용출에 기인하는 것이었다. 증류수-30-볏짚을 급여한 병아리는 무처리 혹은 NaClO$_2$-30-볏짚을 급여한것에 비해서 증체량이 높고 사료요구량이 낮았다. 질소밸런스 및 축적율은 증류수-30-볏짚을 급여한것에서 무처리 및 NaClO$_2$-30-볏짚을 급여한것에 비해서 높았고, 조지방소화율은 높아지는 경향이 있었다. 무처리, 증류수-30 및 NaClO$_2$-30-볏짚을 급여한 병아리의 MEn/GE는 각각 71.9, 72.9 및 70.4%였으며, 대사체중(kg 0.75)당 MEn섭취량은 각각 307.3, 296.2 및 291.4 KCal가 되었다. 이때 kg 0.75당 1일 단백질축적량은 각각 1.647, 1.969 및 1.560g이었다. 한편 증류수-30-볏짚을 급여한 병아리의 단백질 1g 축적에 상당하는 MEn는 30.56Kcal로써 무처리 및 NaClO$_2$-30-볏짚을 급여한것의 36.90 및 37.58Kcal보다 낮았다. 따라서 무처리볏짚에는 에너지 이용성 혹은 단백질축적에 영향을 미치는 물질 혹은 성질이 존재하며, 이것은 볏짚을 끓임으로써 제거된다는 것을 시모고 있다.

• 한국광물학회지
• /
• 제10권2호
• /
• pp.114-125
• /
• 1997

The purpose of this study is to clarify the geological occurrence, mineralogical, physico-chemical and thermal properties of the sericite ore which located in Chungha area, Kyungsangbuk-do. The geology of this area are composed mainly of hornfels and some felsite porphyry. The sericitic ore is classified into sericite, sericite-quartz and quartz-sericite ore according to mineral assemblages. Mineral components in sericite ore are mainly sericite with minor quartz, apatite, sphene, zircon, ilmenite, bismuthinite, iron oxide and etc. Sericite-quartz ore are mainly composed of sericite and quartz. Accessary minerals are muscovite, epidote, zircon, sphene, iron oxide and etc. The chemical compositions of K2O, Al2O3, & Ignition loss in sericite and sericite-quartz ore increase than that of the host rock, while the composition of SiO2, Na2O & Fe2O3 decrease. Sericite and sericite-quartz ore are characterized by the specific gravity of 2.35 and 2.44, the pH of 4.36 cP and 2.36 cP respectively. The result of size analyses of sericite ore is 11.3% in grain volume concentration between 12.9 $\mu\textrm{m}$ and 11.1$\mu\textrm{m}$, and 32.3% between 9.6$\mu\textrm{m}$ and 12.9$\mu\textrm{m}$. The thermal expansivity of sericite and sericite-quartz ore show the similar pattern. The sericite ore shows the thermal expansivity of 0.31% at 50$0^{\circ}C$, 0.39~0.75% at 600~1,00$0^{\circ}C$ and 0.74% at 1,10$0^{\circ}C$. The sericite-quartz ore show the thermal expansivity of 0.29% at 50$0^{\circ}C$, 0.36~0.72% at 600~1,000% and 0.71% at 1,10$0^{\circ}C$.

• 한국진공학회지
• /
• 제6권4호
• /
• pp.359-363
• /
• 1997

Power를 40W로 고정하고 시간을 5~120초간 변화시켜 아르곤 플라즈마로 처리시킨 n-GaAs(100)의 특성을 photoreflectance(PR) 측정으로 조사하였다. 아르곤 플라즈마 처리시 간을 증가시킴에 따라 Eo피크의 세기는 처리시간이 5초일 때 최소로 관측되었으며, 이때 표 면전기장 ($E_0$), 순수 캐리어농도(ND-NA) 및 표면상태밀도($Q_ss$)는 각각 $1.05\times10^5\textrm{V/cm},1.31\times10^{17}\textrm{cm}^{-3}$및 $1.64\times10^{-7}\textrm{C/cm}^2$로 이 값들은 bulk 시료에 비해 약 57.1, 81.4 및 56.9% 감소하였다. 반면에 5초일 때 compensation center 농도 ($N_A$)는 $5.75\times10{17}\textrm{cm}^{-3}$로 최대였다. 그리고 아르곤 플라즈마 처리시 유발된 결함들의 침투깊이는 표면에서 약450$\AA$정도였다.

• Animal cells and systems
• /
• 제6권1호
• /
• pp.75-80
• /
• 2002

A study on the effects of bisphenol A (BPA) on sex differentiation and gonadal development in medaka, Oryzias latipes, was investigated by histological examination. The fish were exposed to aqueous solutions of BPA at nominal concentrations of 50, 100, and 200 $\mu\textrm{g}$/L from newly-hatched larvae stage to 70 d. The ovaries of female fish were composed of oocytes at the chromatin nucleolus and peri-nucleolus stages at 20 d after the exposure. The testes contained a number of spermatogonia and spermatocytes at 30 d. In the process of sex differentiation. gonadal development was not different in all experimental groups until 30 d after the exposure. At 70 d after the exposure, however, advanced development of oocytes in the ovary and inhibition of spermatogenesis in the testis were observed in the BPA-treated groups compared to the non-treated controls. More females than males were identified in the 50 and 100 $\mu\textrm{g}$/L BPA-treated groups, in comparison to the 200 $\mu\textrm{g}$/L BPA-treated group and non-treated controls. Medaka exposed to 200 $\mu\textrm{g}$/L BPA were bigger compared to other experimental groups. The present study suggests that BPA may lead to problems in either mating or sexual behavior due to the difference in growth and disparity of sexual maturation between male and female fish.

• 반도체디스플레이기술학회지
• /
• 제3권3호
• /
• pp.1-4
• /
• 2004

Fabrication and electrical and mechanical properties of piezoelectric micro bending actuators (PMBA) using sol-gel-multi-coated thick PZT films and MEMS processes were investigated. PMBA could be used for design and fabrication of micro fluidic devices, for example, micro-pumps, micro dispensers, and so on. PMBA were fabricated using 2 um thick PZT films on Pt (350 nm)/$SiO_2$ (500 nm)/Si ($300\mu\textrm{m}$) substrates and MEMS processes. 7 types of PMBA were fabricated with areas of silicon diaphragms, PZT films and top electrodes. When the sizes of silicon diaphragms, PZT films and Pt top electrodes were reduced from 3000$\times$$1389\mu\textrm{m}$, 4000$\times$$1000\mu\textrm{m}$ and 4000$\times$$900\mu\textrm{m}$ down to 14%, 14% and 11 % of them, respectively, the center displacements of PMBA were decreased from 0.68 um to 0.10 um at 5 Hz and 12 Vpp. So, PMBA with large areas showed larger displacements than PMBA with small areas and experimental results were also good agreement with the plate and shell theory.