• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7A
• /
• pp.563-568
• /
• 2003

In this paper, a miniaturized parallel coupled bandpass filter using multi-layered LTCC(Low Temperature Co-fired Ceramics) substrate for SOP(System-On-Package) is proposed for applications to wireless communication systems. The fabricated BPF is composed of five 106${\mu}{\textrm}{m}$ thick LTCC layers and its size is 5.24mm x 4.3mm x 0.53 mm. The measured characteristics of the BPF show the center frequency of 5.8GHz, bandwidth of 200MHz, insertion loss of 2.326dB and return loss of 13.679dB. In addition, the attenuation is 28.052dB at 4.7GHz.

• Journal of the Korean Ceramic Society
• /
• v.38 no.12
• /
• pp.1144-1149
• /
• 2001

In this research, the fabrication of Si/SiO$_2$optical waveguide amplifier by FHD(Flame Hydrolysis Deposition) and Solution Doping was carried out. It was observed that the reduction of fluorescence was prevented up to 0.14 wt% Er whn 0.48 wt% Al was doped and the FWHA of $1.5mutextrm{m}$ fluorescence band increased by 5 nm as increasing amount of Al. Therefore from these results, we could confirm depressing concentration quenching of Er ions and increasing FWHM of fluorescence spectrum by addition of Al.

• KSBB Journal
• /
• v.18 no.1
• /
• pp.51-54
• /
• 2003

The objective of this study was to optimize culture conditions and to produce hydrogen and organic compounds using microalga Chlamydomonas reinhardtii. First of all, C. reinhardtii UTEX 90 was chosen from the three kinds of strains in terms of their hydrogen and organic compound productivity. The optimum $\textrm{CO}_2$ concentration range of C. reinhardtii UTEX 90 was 1to 3%. We tested two medium, which are popular in this microalga culture; Brostol's medium and TAP medium (8). The cell growth in TAP medium was found to be higher than a Brostol's medium. Optimum culture with 3% of $\textrm{CO}_2$ in TAP medium produced the most hydrogen ($0.5\mu$ mol/ mg DCW), though Bristol's medium produced twice as much total organics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.607-612
• /
• 2003

In this paper, a miniaturized parallel coupled bandpass filter using multi-layered LTCC(Low Temperature Co-fired Ceramics) substrate for SOP(System-On-Package) is proposed for applications to wireless communication systems. The fabricated BPF is composed of five 106$\mu\textrm{m}$ thick LTCC layers and its size is 5.24mm ${\times}$ 4.3mm${\times}$ 0.53mm. The measured characteristics of the BPF show the center frequency of 5.8GHz, bandwidth of 200㎒, insertion loss of 2.326㏈ and return loss of 13.679㏈. In addition, the attenuation is 28.052㏈ at 4.7GHz.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2003.10b
• /
• pp.119-119
• /
• 2003

The objective of this study was to determine genotoxic potential of Sophora Japonica Linne Seed Extract(SE). The bacterial reverse mutation test set the treatment levels of SE at 0, 312.5, 625, 1250, 2500, 5000 $\mu\textrm{g}$/plate using Salmonella typhimurium strains (TA1535, TA1537, TA98, TA100) and Escherichia coli WP2uvrA(pKM101). (omitted)

• Korean Journal of Materials Research
• /
• v.9 no.7
• /
• pp.753-759
• /
• 1999

The microstructure and electrical properties of ZNR that W $O_3$ is added in the range 0.5~4.0mol%, were investigated. The major part of W $O_3$ were segregated at the nodal point and W-rich phase was formed. Three crystalline phases, such as W-rich phase (W $O_3$), Bi-rich phase (B $i_2$W $O_{6}$ ), and spinel phase (Z $n_{2.33}$S $b_{0.67}$ $O_4$) were confirmed to be co-existed at the nodal point The average grain size increased in the range 15.5~29.9$\mu\textrm{m}$ with increasing W $O_3$ additive content. Consequently. W $O_3$ acted as a promotion additive of grain growth. As the W $O_3$ additive content increases. the varistor voltage and the nonlinear exponent decreased in the range 186.82~35.87V/mm and 20.90~3.34, respectively, and the leakage current increased in the range of 22.39~83.01 uh. With increasing W $O_3$ additive content, the barrier height and the density of interface states decreased in the range 1.93~0.43eV and (4.38~1.22)$\times$10$^{12}$ $\textrm{cm}^2$, respectively. W $O_3$ acted as an acceptor additive due to the donor concentration increasing in the range (1.06~0.38)$\times$10$^{18}$ /㎤with increasing W $O_3$ additive content.t.t.

• Journal of Welding and Joining
• /
• v.21 no.7
• /
• pp.34-41
• /
• 2003

Weld quality monitoring and seam tracking along the butt-joint lengthwise to the tube axis are studied. The material of tube is 60kg/$\textrm{mm}^2$ grade steel sheet, and the longitudinal butt-joint is shaped by 2 roll bending machine. The tube with a thickness of 1.5mm, diameter of 105.4mm and length of 2000mm is successfully obtained by the $CO_2$ laser welding system equipped with a seam tracker and plasma sensor. Experimental results show that the developed welding system can be used for the precision seam tracking and the real-time monitoring of weld quality, and the laser welded tube can be used for car body md component after tubular hydroforming.

• Journal of the Korean Magnetics Society
• /
• v.7 no.1
• /
• pp.38-43
• /
• 1997

For amorphous $Co_{1-x}Ti_x$(X=0.13, 0.16, 0.21 at.%) thin films deposited by DC magnetron sputtering method ferromagnetic resonance experiments have been used to investigate the dependence of surface magnetic properties according to annealing temperature (150~225 $^{\circ}C$). Spin wave resonance spectra for all annealing temperatures consist of several volume modes and one(or two) surface mode. It is suggested that both surfaces of the film have a perpendicular hard axis to the film plane(negative surface anisotropy). Also, the surface anisotropy $K_{s2}$ at substrate film interface is varied slowly from -0.11 to -0.25 erg/ $\textrm{cm}^2$ and the surface anisotropy $K_{s1}$ at film-air interface is varied from 0.16 to -0.53 erg/ $\textrm{cm}^2$ with increasing annealing temperature. We conjecture that the variation of surface anisotropy $K_{s1}$ is due to the increase of Co concentration resulted from Ti oxidation for low temperature annealing(150~200 $^{\circ}C$) and the diffusion of Co atoms near the film surfaces for high temperature annealing(225~250 $^{\circ}C$).

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.4
• /
• pp.321-329
• /
• 2001

This study included three experiments to evaluate in-vehicle exposures to PM10 and CO: 1) evaluation of in-passenger car exposures, 2) evaluation of in-public bus exposures, and 3) simultaneous evaluation of in-passenger car and in -university bus exposures. The tests of four factors (transportation mode, passenger-car type, commute period, and commute season were focused. A total of 40 actual passenger car commuters, 20 public bus commuters, and four university buses were recruited or surveyed. The same commuters ware participated in both the summer and winter studied. Two factory such as transportation mode and passenger-car type were found to have little effect on the in-vehicle levels of PM10 and CO. Commute period was found to have little effect on the in-vehicle CO levels. Conversely, the other factor, commuting season was found to influence on the in-vehicle levels of PM10 and CO. The present study also confirmed that under the Korean commute conditions, vehicle interiors are an important microenvironment for exposure to PM10 and CO. This was supported by finding that the in-vehicle Air levels were much higher than ambient air levels reported by several previous studies. The mean in -vehicle PM10 concentrations were 114 and 103$\mu\textrm{g}$/m$^3$for passenger cars and public buses, respectively. For CO, the mean in-vehicle concentrations were 2.9 and 2.6 ppm for passenger cars and public louses, respectively.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.2
• /
• pp.19-35
• /
• 2003

In order 새 investigate the spatial and seasonal variations of heavy metal pollution in heavily industrialized urban area, urban roadside sediments were collected for five years from gully pots in Seoul City. A series of studies have been carried out concerning the physicochemical characteristics of the sediments in order to evaluate the contamination of heavy metals such as Cd, Co, Cr, Cu, Ni, Pb and Zn. Roadside sediments and uncontaminated stream sediments were analyzed for total metal concentrations using acid extraction. The roadside sediments are characterized by very high concentrations of Zn (2,665.0$\pm$1,815.0 $\mu\textrm{g}$/g), Cu (445.6$\pm$708.0 $\mu\textrm{g}$/g), Pb (214.3$\pm$147.9 $\mu\textrm{g}$/g) and Cr (182.1$\pm$268.8 $\mu\textrm{g}$/g), indicating an artificial accumulation of these metals to the sediment chemistry. Comparing with average contents of uncontaminated stream sediments, roadside sediments were shown zinc 14 times (up to 64.4), copper 9 times (up to 181.7), lead 6 times (up to 63.7), cobalt 6 times (up to 168.7), nickel 4 times (up to 98.4), cadmium 2 times (up to 12.8) and chrome 2 times (up to 40.2) high content. The relative degree of heavy metal pollution for roadside sediments collected from each district in Seoul City is evaluated using the “geoaccumulation index”. As a result, heavy-metal contamination is highest centering the oldest residential district and industry area, and contamination level decreases as go to outer block of the city. The factor analysis results indicate that the levels of Cu, Ni, Fe and Cr are strongly related to numbers of factories, whereas the concentrations of Cr, Zn and Cd dependant on pollution index, indicating artificial contamination due to site-specific traffic density.