• Advances in aircraft and spacecraft science
• /
• 제6권5호
• /
• pp.371-389
• /
• 2019

The implementation of a robust $H_{\infty}$ Control, which is numerically efficient for uncertain nonlinear dynamics, on longitudinal and lateral autopilots is realised for a quarter scale Piper J3-Cub model accepted as an unmanned aerial vehicle (UAV) under the condition of sensor noise and disturbance effects. The stability and control coefficients of the UAV are evaluated through XFLR5 software, which utilises a vortex lattice method at a predefined flight condition. After that, the longitudinal trim point is computed, and the linearization process is performed at this trim point. The "${\mu}$-Synthesis"-based robust $H_{\infty}$ control algorithm for roll, pitch and yaw displacement autopilots are developed for both longitudinal and lateral linearised nonlinear dynamics. Controller performances, closed-loop frequency responses, nominal and perturbed system responses are obtained under the conditions of disturbance and sensor noise. The simulation results indicate that the proposed control scheme achieves robust performance and guarantees stability under exogenous disturbance and measurement noise effects and model uncertainty.

• 한국지진공학회논문집
• /
• 제6권6호
• /
• pp.41-48
• /
• 2002

이 논문은 지진을 받는 축소 3층 건물모델의 제어 실험에 관한 것이다. 건물모델에 대해 능동 질량 감쇠기를 사용하여 강인제어기인 $\mu$합성 제어기를 설계하고 실험적으로 검증하였다. 외란 입력과 제어용 출력에 적합한 주파수 가중함수를 설정하고 가중함수의 조합을 분석하여 최적의 $\mu$합성 제어기를 제시하였다. 실험 결과 백색잡음 가진 입력에 대한 RMS 응답에서 60-70%의 감소를 보여주었고, 축소 지진 입력에 대한 최대 응답에서 30-45% 정도의 감소효과를 나타내었다. 수치해석결과와 실험의 결과가 매우 정확히 일치하였으며 불확실성을 갖는 구조물에 대하여 제어기가 불확실성의 범위 내에서 강인하다는 것을 보여주었다.

• 대한기계학회논문집A
• /
• 제20권6호
• /
• pp.1882-1892
• /
• 1996

This paper is concerned with the position control of the ond degree-of freedom manipulator using pneumatic artificial muscle actuator which is built to have a proper compliance. For t his pneumatic artificial muscle actuator though, it is difficult to make an effective control scheme due to the nonlinearity and uncertainties on the dynamics of the actuator. In this paper, a third-order equation of motion is derived for the actuator including the dynamics of the pneumatic servovalve. Later, various modeling uncertainties due to the nonlinearity and unmodeled dynamics of the servo vlave and the actuator are taken care of, as a trade-off between the closed-loop performance of the controlled system and its robustness to uncertainties. A controller using .mu. synthesis thchnique is designed, and robust performance against measurement noise, various modeling uncertainties due to the dynamics of the servo valve and actuator is achieved. The effectiveness of the proposed control methods is illustrated through simulations and experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.95.3-95
• /
• 2001

This paper investigates the simultaneous use of mixed H2/H_inf and mu-synthesis design methodology to design a robust controller for flexible link. We adopt four steps to design control system as follows: Step 1 : Generally, there are differences between the nominal and real model, so we consider the plant as a combination of parametric model uncertainty and unstructured uncertainty represents real structural uncertainties associated with the damping ratios of the flexible modes retained in the nominal model without payload. denotes the uncertainty which is due to the payload added at the tip. Step 2 : We adopt the mixed H2/H_inf theory to design a feedback controller K(s) by using the model uncertainty ...

• 전자공학회논문지T
• /
• 제36T권3호
• /
• pp.41-49
• /
• 1999

본 논문에서는 μ-합성법으로 제어기를 설계하여 센서와 구동부가 동일위치에 있지 않은(noncollocated) 탄성-질량 시스템에 적용한다. 스프링 상수값과 제어대상의 부하 질량은 불확실하다고 가정한다 매개변수 불확실성을 포함하고 있는 제어대상은 상태 공간 방정식, 특히 묘사형(descriptor form)을 사용하여 모델링 한다. μ-합성법으로 설계된 H/sub ∞/ 제어기를 표준 H/sub ∞/ 제어기와 비교한다. 두 개의 H/sub ∞/ 제어기 성능을 비교하기 위해, μ-합성 제어기가 구조적 불확실성을 가지고 있다는 것을 제외하고는 서로 동일한 하중함수를 가지고 설계한다. 표준 H/sub ∞/ 제어기와 비교하여 설계된 제어기는 만족스러운 강건 안정성과 강건 성능을 가지는 것을 시뮬레이션과 실험을 통해 확인한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.795-797
• /
• 1998

This paper suggests a design method of the optimal PD control system having robust performance. This PD control system is designed by applying genetic algorithm(GA) with reference model to the optimal determination of proportional(P) gain and derivative(D) gain that are given by PD servo controller. These proportional and derivative gains are simultaneously optimized in the search domain guaranteeing the robust performance of closed-loop system. This PD control system is applied to the fuel-injection control system of diesel engine and compared with ${\mu}$ -synthesis control system for robust performance. The effectiveness of this PD control system is verified by computer simulation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.3-6
• /
• 2000

The magnetic bearing system are intrinsically unstable, and need the feedback control of electromagnetic forces with measured displacements. So the controller design plays an important role in constructing high performance magnetic bearing system. In case of magnetic bearing system, the order of identified model is high because of unknown dynamics included in closed loop systems - such as sensor dynamics, actuator dynamics - and non-linearity of magnetic bearings itself. In this paper the identification and robust control of flexible rotor supported by magnetic bearing are discussed. We measure and identify overall system that contains not only flexible rotor model but also magnetic bearing and time delay. The structured and unstructured uncertainties are modeled that cover variations of natural frequencies, uncertainties in sensor and actuator gains and unmodeled dynamics. And desired performances are specified with several weighting function. Using augmented system that includes identified model, uncertainties, and weighting functions, μ-synthesis is applied to flexible rotor supported with magnetic bearing. The flexible rotor was spin up over the first flexible critical speed.

• 전력전자학회논문지
• /
• 제16권4호
• /
• pp.317-325
• /
• 2011

본 논문에서는 단상 UPS 인버터의 강인한 전압제어기를 제안하고 설계한다. 제안된 전압제어기는 부하 변동에 대해서 강인 안정성과 강인 추종 성능을 얻기 위해 ${\mu}$-합성에 기초한 강인 제어 이론을 이용하여 설계되었다. 설계된 전압제어기의 강인 제어 성능은 ${\mu}$-해석을 통해 이론적으로 확인하였다. 그리고 단상 인버터에 대해 선형 부하와 비선형 부하로 시뮬레이션 및 실험을 수행하여 제안된 전압제어기가 안정된 전압제어 성능과 빠른 동특성을 가지는 향상된 제어성능을 제공하는 것을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.22.5-22
• /
• 2001

Robust control of a GFR composite beam with a distributed PVDF sensor and piezo-ceramic actuator is presented En this paper. Modal analysis method and modal coordinates are introduced to obtain the state educations of the structural system. 1st and 2nd natural frequencies are considered In the modeling, because robust control theory which is robustness to structured uncertainty is adopted to suppress the vibration. If the controllers designed by H$\^$$\infty$/ theory do not satisfy control performance, it is improved by ${\mu}$-synthesis method with D-K Iteration so that the ${\mu}$-controller based on the structured singular value satisfies the nominal performance and robust performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.153-156
• /
• 2006

The vibration isolation system is a system that attenuates the vibration transmitted from surroundings by using external energy supply like electricity and feedback and/or feedforward functions. Such a system needs stiff structure to make precise positioning without ripple within a certain bandwidth. So, a horizontal and rotary arrangement of the actuation module is suggested by using lever linkage. Modeling and kinematic formulation are completed and system identification is accomplished to tune the design variables accurately. The vibration isolation control is performed by mu-synthesis with the uncertainties in design variables. Low frequency signal enhancement circuit and saturation proof integration algorithm are devised to use seismic sensors for displacement control. This overall system shows good disturbance rejection performance.