• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.152-160
• /
• 1993

This paper presents experimental study of the static and dynamic fracture toughness behavior of a A1-6061 aluminum alloy reinforced alumina( .delta. -A1$_{2}$0$_{3}$) whiskers with 5%, 10%, 15% volume fraction. The static fracture tests using three-point bending specimen were performed by UTM25T. And drop weight impact tester performing dynamic fracture tests was used to measure dynamic locads applied to a fatigue-precracked specimes. The oneset of crack initiation was detected uwing a strain gage bonded near a crack tip. The value of static fracture toughness $K_{IC}$ and dynamic fracture toughness $K_{ID}$ were decided on the basis of linear elastic fracture mechanics. The effects of fiber volume fraction and loading on fracture toughness were investigated. The distribution of whiskers, bonding state and fracture interfaces involved in void, fiber pull-out state were investigated by optical microscopy(OM) and scanning electron microscopy(SEM)

• Economic and Environmental Geology
• /
• v.24 no.2
• /
• pp.97-105
• /
• 1991

Oxygen and sulfur isotope composition of pyrophyllite and pyrite from six pyrophyllite deposits in the Yangsan-Milyang areas (the Cheonbulsan, Dumyong, Dongrae, Youkwang, Sungjin and Milyang mines), and five deposits in the Whasoon-Dado-Haenam areas (the Byuksong, Songseok, Dado, Bugock and Nowha mines) were measured. Pyrophyllite ores both from the Yangsan-Milyang areas and the Dado-Haenam areas are composed mainly of high alumina minerals such as pyrophyllite, sericite and kaolinite. Most of altered rocks show diagnostic chacteristics of bleaching effect. Major minerals of the Songseok ore deposit in the Whasoon area are pyrophyllite, and diaspore with minor amounts of kaolinite and quartz. The Byuksong ores from the Whasoon area were composed mainly of andalusite, kaolinite, pyrophyllite and mica with small amounts of chloritoid, quartz and carbonaceous matter. The Byuksong and Songseok ores show metamorphic textures such as porphyroblastic, and pressure solution textures, and have low whiteness values, The ${\delta}^{18}O$ values of pyrophyllite from the Cheonbulsan and Dumyong mines in the Yangsan area, and the Dado and Nowha mines in the Dado-Haenam areas were in the range of 0.23~5.36%,. The relatively low 8 180 values provide conclusive evidence for hydrothermal activity in these deposits. The ${\delta}^{18}O$ values of pvrophvllite from the Songseok mine in the Whasoon area were measured as 6.70-8.13%, and these higher ${\delta}^{18}O$ values suggest that the Songseok ore deposit have been probably subjected to metamorphism. ${\delta}^{34}$S(pyrito) values from the Cheonbulsan, Dumyong, Youkwang, Dongrae, Sungjin and Milyang deposits in the Yangsan-Milyang areas, and the Dado pyrophyllite deposits in the Dado area range from -5.8 to 2.7%, which means that the pyrite sulfur could be of igneous origin. ${\delta}^{34}$S(pyrito) from the Nohwa mine in the Haenam area is, however, measured as -12.4%" implying the contamination of sulfur derived from the sedimentary country rocks. All of the studied high alumina deposits in the Yangsan-Milyang areas and the Dado-Haenam areas were hydrothermal in origin, whereas the Byuksong and Songseok ore deposits in the Whasoon area were probably of metamorphic origin.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.4
• /
• pp.267-272
• /
• 2005

We deposited thin films of organic light-emitting-material $Alq_3$(alumina quinoline) on silicon and slide-glass substrates using thermal evaporation method, and measured spectra of ellipsometry angles ${\Delta}$ and ${\Psi}$ in the photon-energy range of 1.5~5.0 eV using a variable angle spectroscopic ellipsometer. The optical constants, refractive index and extinction coefficient, of $Alq_3$ were determined via the dispersion parameters extracted from the curve-fitting process based on Jellison-Modine dispersion function. The reliability of determined optical constants were verified through the comparison of measured and simulated transmittance curves and the good agreement between simulated absorption-coefficient curves and absorbance spectra measured using a spectrophotometer.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.4
• /
• pp.466-477
• /
• 2005

Statement of problem : Problem of matching the appearance of porcelain restorations with the patient's natural dentition has always been a concern to dental clinicians. Recently, demands for esthetics, even in restorations requiring strength, has brought a revolution to dentistry and increased use of zirconia. Among the various factors, shade and translucency or the core can significantly affect the overall esthetics of the restoration and should be considered when selecting an all-ceramic system. Purpose : The purpose of this study was to spectrophotometrically evaluate the influence of different zirconia systems and core thickness on the final shade of all-ceramic restorations using the CIEL$^*a^*b^*$ system. Material and Methods: Core specimens (n : 20 per group) of In-Ceram Alumina, In-Ceram Zirconia, Digident CAD/CAM Zirconia, Cercon Zirconia were fabricated 20mm in diameter. 10 specimens of each group were fabricated at core thickness of 0.5mm and 0.7mm. These core specimens were veneered with shade Al & A3 porcelain of the recommended manufacturer. CIEL$^*a^*b^*$ coordinates were recorded for each specimen with a spectrophotometer (Model CM-2600d, Minolta, Japan). Color differences were calculated using the equation ${\Delta}E^*=[({\Delta}L^*)^2+({\Delta}a^*)^2+({\Delta}b^*)^2]^{\frac{1}{2}}$. Results : 1. Specimens of core thickness 0.5mm and 0.7mm did not exhibit clinically perceived color difference. 2. Regarding shade reproducibility, In-Ceram Alumina and In-Ceram Zirconia showed significant difference within each group. 3. Cercon Zirconia group showed the highest $L^*$ value and Digident Zirconia group showed lowest $a^*$ & $b^*$ value. 4. Generally the shade difference between materials was higher in the A3 shade group than in the Al shade group. Conclusion: Within the limitations of this study, there was no color difference after increase in core thickness and every all-ceramic system has color characteristics that clinicians have to consider when selecting materials. Also, manufacturers of different porcelain systems must make every effort to achieve color reproducibility.

• Journal of Sensor Science and Technology
• /
• v.8 no.2
• /
• pp.195-201
• /
• 1999

C-axis oriented $YBa_2Cu_3O_{7-{\delta}}$ (YBCO) thin films were grown on $Al_2O_3$ (alumina and R-plane sapphire) substrates by a pulsed laser deposition method. The crystallinity of the $CeO_2$ buffer layer on sapphire substrate exhibit a strong dependence on the deposition temperature, resulting in the growth of a-axis orientation at $800^{\circ}C$. The superconducting properties of YBCO thin films on $Al_2O_3$ substrates showed strong dependence on both thickness and crystallinity of the $CeO_2$ buffer layer. Critical temperature of YBCO film on alumina substrate was ${\sim}83\;K$. In the case of R-plane sapphire substrate,

• Journal of the Korean Ceramic Society
• /
• v.44 no.11
• /
• pp.613-617
• /
• 2007

The variations of physical and dielectric properties of low temperature dielectrics based on typical aluminoborosilicate glasses modified with several divalent oxides were investigated. The divalent oxides studied here included CaO, MgO, BaO, SrO and ZnO. All samples containing either 35 wt% or 45 wt% alumina filler were prepared at the same processing condition and then fired at $850^{\circ}C$ for 30 min. The resultant characteristics of fired samples depended on the choice of the divalent ion and the content of the alumina filler. Except for the ZnO modification, all other samples containing 35 wt% filler demonstrated promising densification as they exhibited reasonably high densities of 3.07-3.31 $g/cm^3$ and high shrinkages of 14.0-16.4%. Particularly, the sample containing ZnO was distinguished with large variations compared to the base sample, which can be highlighted with earlier densification and crystallization at unexpectedly low temperatures. The negative effects of the ZnO modification on densification and dielectric properties were thought to be associated with earlier crystallization potentially by influencing effective densification via viscous flow. As an optimum composition, the sample containing only CaO showed the most promising characteristics such as $k{\sim}8.05$ and $tan{\delta}{\sim}0.0018$ when 35 wt% alumina filler was used.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1648-1650
• /
• 1999

In the present study. we investigated the role of fillers, alumina trihydrate (ATH) and calcined clay, on the mechanical and electrical properties of EPDM compounds. Mechanical properties and tracking resistance improved with increasing ATH fillers. whereas volume resistivity, tan$\delta$ and dielectric constant decreased when ATH was replaced by clay filler. Futhermore, it was more prominent in $90^{\circ}C$ hot water test. This was explained with polarity of ATH, and the smaller particle size of ATH filler than clay filler.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.772-775
• /
• 2003

The development of new improved type of dielectric materials on the conception of multiphase structure has been carried out in this paper. Metal alkoxides solutions were used for application of thin film by electrophoretic deposition technique. We succeeded in preparation of amorphous and composite dielectric films from Al alkoxides. Specific features of the preparation technique were considered. Microstructure of the films was examined as well as their dielectric properties. TEM analyses reveals that films deposited from aging sols and heat-treated at temperatures as low as $400^{\circ}C$ contain small whiskers of ${\delta}-Al_2O_3$.

• Journal of Powder Materials
• /
• v.12 no.6 s.53
• /
• pp.422-427
• /
• 2005

The $Al_2O_3$ with various phases were prepared by simple ex-situ hydrolysis and spark plasma sintering (SPS) process of Al powder. The nano bayerite $(\beta-Al(OH)_3)$ phase was derived by hydrolysis of commercial powder of Al with micrometer size, whereas the bohemite (AlO(OH)) phase was obtained by hydrolysis of nano Al powder synthesized by pulsed wire evaporation (PWE) method. Compaction as well as dehydration of both nano bayerite and bohemite was carried out simultaneously by SPS method, which is used to fabricate dense powder compacts with a rapid heating rate of $100^{\circ}C$ per min. under the pressure of 50MPa. After compaction treatment in the temperature ranges from $100^{\circ}C\;to\; 1100^{\circ}C$, the bayerite and bohemite phases change into various alumina phases depending on the compaction temperatures. The bayerite shows phase transition of $Al(OH)_3{\to}{\eta}-Al_2O_3{\to}{\theta}-Al_2O_3{\to}\alpha-Al_2O_3$ sequences. On the other hand, the bohemite experiences the phase transition from AlO(OH) to ${\gamma}-Al_2O_3\;at\;350^{\circ}C.$ It shows AlO(OH) ${\gamma}-Al_2O_3{\to}{\delta}-Al_2O_3{\to}{\alpha}-Al_2O_3$ sequences. The ${\gamma}-Al_2O_3$ compacted at $550^{\circ}C$ shows a high surface area $(138m^2/g)$.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.8
• /
• pp.348-353
• /
• 2003

This paper was the research of high voltage suspension insulator (400 [kN]) including pottery stone, feldspar, clay and alumina of 17 [wt%]. The slurry was fabricated after ball milling mixed raw materials. Green compacts were made by the extrusion of jiggering method and were sintered at 1300[$^{\circ}C$] for 50 [min.] in the tunnel kiln. The sintered density was reached to 97% of theoretical density, and the bending strength was 1658 [k $g_{f}$/$\textrm{cm}^2$] and hardness and fracture toughness which was measured by ICL( indentation crack length ) method were 1658 (kgf/$\textrm{cm}^2$) and 27.5 [Gpa], respectively. In measurement of tana and insulation break voltage of 400 (kN) porcelain, tan$\delta$ took some numerical value between 17${\times}$10$_{-3}$ and 61${\times}$10$_{-3}$ and insulation break voltage value was 19.9$\pm$1.4 [㎸/mm]. The test was performed to research whether the shape of pin affect a overvoltage break load or not As a consequence, when a pin was designed a pin diameter 51 [mm] with the bottom form of two-step constructed with straight in the suspension insulator, Insulator showed overvoltage break load 52 [ton] of the highest value and reflected a fine characteristic in aged deterioration test which is one of the accelerated aging test. Also it could be confirmed a fine characteristic through performing the test that electrical property of insulator was established correctly in accordance with IEC 60383-1 standards.s.