• 한국세라믹학회지
• /
• 제26권3호
• /
• pp.402-408
• /
• 1989

$\beta$-Sialon powder was synthesized by the simultaneous reduction and nitridation of the mixed powder of Hadong kaolin and Kimcheon quartzite, using graphite as a reducing agent. The synthesized $\beta$-Sialon powder (Z=1) was hot-pressed at 175$0^{\circ}C$, for 90min under 30MPa in N2 atmosphere, after Yttria and YAG composition material were added as sintering agents. The effects of grain-boundary crystallization on high-temperature mechanical properties of $\beta$-Sialon ceramics were investigated. Strength degradation was observed at above 1,00$0^{\circ}C$ for the $\beta$-Sialon (Z=1)-8wt% Y2O3 composition, but it was not observed up to 1,20$0^{\circ}C$ for the $\beta$-Sialon-8wt% YAG composition which was annealed at 1,40$0^{\circ}C$ for 4 hours in N2 atmosphere. After the $\beta$-Sialon-8wt% YAG composition was annealed, the decrease of fracture toughness was observed.

• 한국세라믹학회지
• /
• 제24권4호
• /
• pp.349-356
• /
• 1987

${\beta}$-Sialon powder was synthesized by the simultaneous reduction and nitridation of Hadong kaolin at 1350$^{\circ}C$ in N2-H2 atmosphere, using graphite as a reducing agent. The synthesized ${\beta}$-Sialon powder was pressurelessly sintered over 1450-1850$^{\circ}C$ in nitrogen atmosphere. The average particle size of ${\beta}$-Sialon powder was about 4.5$\mu\textrm{m}$. The relative density, M.O.R., fracture toughness and micro-hardness of ${\beta}$-Sialon ceramics sintered at 1800$^{\circ}C$ for 1 hour were 92%, 36 kpsi, 2.8MN/㎥/2 and 13.3 GN/㎡, respectively. The critical temperature difference (ΔT) in water quench thermal shock behavior showed about 375$^{\circ}C$ for the synthesized ${\beta}$-Sialon ceramics.

• 한국세라믹학회지
• /
• 제31권11호
• /
• pp.1259-1264
• /
• 1994

$\beta$-Sialon has been regarded as one of promising materials showing high strength, fracture toughness, corrosion resistence and wear resistence. The improvement of the fracture toughness and tribological properties of $\beta$-Sialon (Z=1) has been attempeted by fabricating the $\beta$-Sialon/ SiC whisker composite. Each of green body composed of following ingredients, i.e., Si3N4, AlN, Y2O3 nd SiC, respectively, was first fired at 178$0^{\circ}C$ for 3hrs in N2 atmosphere and then post-HIPed at 173$0^{\circ}C$ for 1 hr under 170 MPa for N2 gas pressure. The fracture toughness, flexural strength and tribological properties increased with increasing SiC whisker content, despite the reduction of the relative density and hardness. $\beta$-Sialon/15 vol% SiC whisker showed a significant enhancement of wear resistance compared to the monolithic $\beta$-Sialon. The addition of SiC whisker caused the reduction of the density and hardness, but induced the increment of wear resistance.

• 한국세라믹학회지
• /
• 제26권2호
• /
• pp.201-209
• /
• 1989

Fine Si-Al-OH coprecipitate powders were prepared from Si- and Al-alkoxides by the hydrolysis method. $\beta$-Sialon powder was obtained from prepared Si-Al-OH coprecipitate by the simultaneous reduction and nitridation method. The syntehsized Sialon powder was pressureless sintered at 175$0^{\circ}C$ for 90 min in N2 atmosphere. The characterization of the Sialon powder was performed with XRD, BET, SEM, TEM and particle size analysis. The sinterability and mechanical properties of sintered bodies were investigated in terms of relative density, M.O.R., fracture toughness, hardness and the morphology of microstructure. The highest values of their mechanical properties were obtained for the $\beta$-Sialon ceramics at Z=1 and those values are as follows : M.O.R., KIC and HV of $\beta$-Sialon ceramics(Z=1) are 499.1 MPa, 5.9MN/m3/2 and 18.7GPa, respectively.

• 한국세라믹학회지
• /
• 제29권7호
• /
• pp.551-557
• /
• 1992

X-ray diffraction patterns, IR spectra and zeta-potentials of silicon nitride and $\beta$-Sialon powders were investigated before and after surface manipulations. $\beta$-Sialon powder was produced from Hadong Kaolin by the carbothermic reduction and simulataneous nitridation. Isoelectric points of as-prepared Si3N4 and $\beta$-Sialon powders were 8.4 and 7.4, respectively. After both silicon nitride and $\beta$-Sialon powders were oxidized at 80$0^{\circ}C$ for 24 h in air, the isoelectric points of these powders corresponded to that of silica (pH=3). I case of the addition of Darvan C as deflocculant, its isoelectric point was 3 and zeta-potential was nearly constant in the range of pH 5~12. When SN 7347 was used as deflocculant, its isoelectric point was 8.3 and zeta-potential over -156 mV was measured above pH 11.

• 한국세라믹학회지
• /
• 제28권5호
• /
• pp.390-398
• /
• 1991

$\beta$-Sialon powder was prepared from Wando pyrophyllite by the carbothermic reduction and nitridation at 135$0^{\circ}C$ for 10 h nitrogen atmosphere. Amorphous silica prepared from Si(OC2H5)4 was added to Wando pyrophyllite powder in order to control the final Z value. Two different methods were applied for synthesis of $\beta$-sialon powders. In Process A, the amorphous silica prepared from Si(OC2H5)4 was admixed to Wando pyrophyllite powder. Process B was started from the mixture of Wando Y2O3 was added to the synthesized $\beta$-Sialon powders as a sintering aid, and the mixed powders were hot pressed at 175$0^{\circ}C$ for 120 min in nitrogen atmosphere under 30 MPa. Their mechanical properties were compared. The maximum values of M.O.R., hardness and KIC were 667 MPa, 16 GPa and 6.3 MN/m3/2, respectively, and they are the values obtained form $\beta$-Sialon ceramics prepared by process A of Z=0.5.

• 자원리싸이클링
• /
• 제12권5호
• /
• pp.29-35
• /
• 2003

국내의 화력발전소에서 발생되는 Fly ash와 활성탄을 원료로 사용하여 환원질화방법에 의해 $\beta$-Sialon 분말을 합성하였다. 분말합성은 $1,450^{\circ}C$에서 10시간 동안 질소분위기에서 합성하였으며, 또한 소결체 제조는 $1,550^{\circ}C$에서 3시간 동안 관상로에서 소결하였다. 본 실험에서 합성된 $\beta$-Sialon의 z value는 2.15이었으며 XRD 분석결과 $\beta$-Sialon 이외에 소량의 $SiO_2$와 $_FeSi{x}$ 가 일부 확인되었다. $\beta$-Sialon 소결체는 20시간 동안의 고온산화 결과 1,31$0^{\circ}C$까지는 열적으로 매우 안정하나 $1,360^{\circ}C$ 부근에서는 급격한 무게의 증가를 나타냈다. $1,360^{\circ}C$에서 10시간 고온산화 후 산화층은 mullite로 상전이가 일어났다.

• 한국세라믹학회지
• /
• 제33권8호
• /
• pp.871-876
• /
• 1996

It is believed that fly ash could be suitable for preparing the sialon by carbothermal reduction method because the total amount of SiO2 and Al2O3 is above 80% and the unburned residual carbon is above 5% within the fly ash. The effects of reaction temperature (1350, 1400, 145$0^{\circ}C$) reaction time (1, 5, 10 hours) and the amount of carbon additions (C/SiO2=2, 3, 4 mole) on the $\beta$-sialon synthesis were obserbed, It was conformed that $\beta$-sialon (Z=2.15~2.18) was formed as major phase under all of the synthesis conditions and small amount of Si2ON2 SiC, AlN and Si3N4 was formed depending on the synthesis conditions. FeSix intermetal-lic compound was formed above 140$0^{\circ}C$ reaction temperature due to the large amount of iron oxides within the raw fly ash.

• 한국세라믹학회지
• /
• 제26권3호
• /
• pp.341-346
• /
• 1989

In order to evaluate the oxidation behavior of $\beta$-Sialon, $\beta$-Sialon ceramics was prepared from Si3N4, Al2O3, AlN and Y2O3 system. The specimens were oxidized in an oxygen atmosphere at 1, 20$0^{\circ}C$ for 9days. Oxidation behavior was evaluated by weight gain oxidation process, surface roughness. Microscopy, EDX and X-ray diffraction analysis were also used for the evaluation. The weight and surface roughness ofoxidized specimens were increased with increasing the oxidation time. Oxidized products were mullite, $\alpha$-cristobalite, yttrium aluminum oxide and yttrium silicate oxide.

• 한국세라믹학회지
• /
• 제26권6호
• /
• pp.771-782
• /
• 1989

Synthesis of $\beta$-Sialon powder was attempted with carbothermal reduction of porous glass. The porous glass was prepared by heat and hydrothermal treatments of 9.32 Li2O.46.5B2O3.37.2SiO2.6.98Al2O3 glass. Carbon pyrolyzed from propane gas was deposited on the porous glass, thereafter activated carbon was added as reducing agents. The synthesized $\beta$-Sialon powder was pressureless sintered at 175$0^{\circ}C$ for 1hr in N2 atmosphere. The characterization of the $\beta$-Sialon powder was performed with XRD, BET, SEM and particle size analysis. The sinterability and mechanical properties of the sintered bodies were investigated in terms of bulk density, M.O.R., fracture toughness, morphology of microstructure and etc. The reduction effect of deposited carbon was better than that of activated carbon mechanically added. The formation of SiC was precominant over that of Si2ON2 and $\beta$-Sialon owing to low partial pressure of N2 inside the pore, wehreas on the surface of porous glass the formation of Si2ON2 and $\beta$-Sialon were predominant. Thereafter, SiC reduced unreacted glass to be $\beta$-Sialon. Single phase of $\beta$-Sialon(Z=1.92) was obtained from PGA porous glass having the largest pore radius by the simultaneous reduction and nitridation method at 145$0^{\circ}C$ for 5hrs. The bulk density, M.O.R., and KIC of the sitered body are 3.17g/cc, 434.4MPa and 4.1MPa.m1/2, respectively.