• Tribology and Lubricants
• /
• v.6 no.2
• /
• pp.16-26
• /
• 1990

고대 이집트시대에서부터 동식물 유지가 차축유 등에 쓰여진 것이 잘 알려져 있으며 유지는 화학적으로 일종의 에스테르이다. 현재 사용되는 윤활유는 그 대부분 원유를 원료로 하는 석유계 윤활유이고 그 외에 동식물유 및 합성 윤활유가 일부 쓰이고 있다. 각종 도구나 기계류의 윤활제로서 동식물 유지가 쓰여지기 시작한 것은 기원전 1500년경부터라 한다. 합성윤활유는 19세기 중엽부터 연구개발이 시작되어 1930년대부터 1940년 사이에 Standard oil of Indiana사이에 $\alpha$-Olefin Oligomer를 그리고 독일 IG 사에서는 Olefin Oligomer와 에스테르를 처음 공업생산하였다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2001.05a
• /
• pp.159-162
• /
• 2001

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.137-141
• /
• 2008

Copolymerization of ethylene and ${\alpha}$-olefin using $rac-Et[Ind]_2ZrCl_2/MAO$ catalyst embedded onto polysty-rene was examined. The embedded catalyst was prepared by polymerizing a small amount of styrene with $rac-Et[Ind]_2ZrCl_2$. The catalytic activities of the embedded catalyst were higher than those of the homogeneous catalystregardless of comonomer type and the characteristic of the active sites of the embedded catalyst was not affected duringthe embedding process. Based on the DSC and NMR analyses of the produced copolymers, it was thought that theembedded catalyst had similar or slightly better comonomer incorporation ability. Furthermore, the copolymers produced by the embedded catalyst had higher bulk densities and better particle morphology than those by the homogeneous catalyst.

• Elastomers and Composites
• /
• v.51 no.3
• /
• pp.188-194
• /
• 2016

In this study, novel quaternary plastomers consisting of ethylene, 1-hexene, high ${\alpha}$-olefin, and divinylbenzene were prepared using Zr metallocene catalyst, borate type cocatalyst, and tri-isobutylaluminium. The molar ratio changes of 1-hexene and high ${\alpha}$-olefin (1-octene, 1-decene, and 1-dodecene) had an effect on the properties of the quaternary plastomers. The structure of the quaternary plastomers was characterized using $^1H$ NMR. Molecular weight properties, crystallinity, and thermal properties of the plastomers were determined by GPC, WAXS, and DMA, respectively. Compared with the terpolymers prepared in our previous study, molecular weight and molecular weight distribution of the quaternary polymers were very similar, whereas glass transition temperature ($T_g$) was very low. Also, hardness and tensile properties of the quaternary plastomers were measured.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.2
• /
• pp.287-291
• /
• 1993

Catalytic iminohydroacylation has been achieved by the reaction of aldimine 1 and 1,5-hexadiene (2a) with Wilkinson's complex as catalyst. Compounds 7a, 8a and 9a were obtained as final product after hydrolysis of the resulting iminohydroacylation products 4a, 5a and 6a. Depending on the reactant ratio (2/1), the ratio of products were changed dramatically : As the 2/1 ratio was increased, 7a is the major product after hydrolysis while 8a is the major with an 1/1 ratio of 2/1. The mechanism of the formation of 5a is determined by the reaction of 1 and 2b under the identical reaction conditions. Considering that 5a may not be formed from the hydroiminoacylation of 14a since 5b cannot be formed from that of conjugate diene 14b generated from isomerization of 2b, 5a must be formed from the reaction of 4a and 10 by addition-elimination mechanism.

• Journal of Adhesion and Interface
• /
• v.16 no.4
• /
• pp.146-151
• /
• 2015

Raw sap of essential oil in Korean Dendropanax lacquer was extracted with ethanol, and which was cured by using ROMP (ring opening metathesis polymerization, one of olefin metathesis). Curing behavior with subsequent film properties were studied and compared with conventional curing (under ambient conditions) and UV photo curing. The compositional changes of major ingredients in the lacquer before and after curing were studied by using GC-MS (gas chromatography mass spectrometry). ROMP-cured coating film showed higher gel contents (40%) as compared to those of conventional (8%) and UV curing (25%). ROMP curing with 2 wt% Grubbs' catalyst at $100^{\circ}C$ completed curing reaction within 2 h, which was much faster than that of conventional curing. The quality of coating film prepared with ROMP was more homogeneous and wrinkle-free as compared with that with UV curing. It was found that major ingredients of sesquiterpenes, such as ${\alpha}$-selinene, ${\beta}$-selinene, and ${\delta}$-cadinene were reacted in ROMP, as well as polyacetylenes.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.632-637
• /
• 2017

The vehicle lubricant occupies upto 35% in a total lubricant market and engine oil occupies upto 77% in the vehicle lubricant market in Korea. A suitable quality management of the circulating engine oil is necessary for driver and engine protection. But, KS and synthetic engine oil products (involved over 30% synthetic oil) are exempt to any quality management under Petroleum and Alternative Fuel Business Act. It is also known that synthetic oils such as PAO (poly alpha olefin) have excellent properties and performance like anti-wear, varnish control and oxidation stability than those of mineral oils. For this reason, PAO has been used for an engine oil, rotary screw and reciprocating compressor in addition to heavy duty and other extreme service applications. In this study, our research group analyzed the chromatogram pattern for the mineral oil, PAO and mineral oil involved a typical ratio of PAO using SIMDIST (simulated distillation). In the SIMDIST chromatogram, the mineral oil showed a broad peak, while PAO showed a sharp typical peak. Also the oil with a large viscosity grade exhibited a long retention time due to the heavy molecular weight and high boiling point. In particular, the blended mineral oil with 20% PAO sample showed a distinctly different pattern compared to that of using the conventional mineral oil. For monitoring PAO contents in distributing engine oils, we analyzed the SIMDIST for 27 kinds of engine oils which were popularly sold in Korea. The analytic results indicate that all kinds of engine oils showed that PAO contents were below 20% in engine oil products. Moreover, the PAO titled product was found to have a small amount of PAO. Thus, we conclude that the related laws for the proper quality management of synthetic oils are needed to be established.

• Tribology and Lubricants
• /
• v.5 no.2
• /
• pp.7-20
• /
• 1989

합성윤활유(synthetic lubricant)라 함은 현재까지도 계속되고 있는 광유(mineral oil) 전성시대의 광유에 대응되는 말로써 광유계 윤활유로 부터 얻기 어려운 높은 점도지수, 우수한 저온 유동성 등의 특성을 얻기 위해 유기합성방법에 의해 인위적으로 제조한 윤활유의 총칭이며 작용기의 종류, 합성방법, 등에 따라 다양하게 분류된다. 합성윤활유의 종류에는 합성방법에 따라 폴리머형(P형), 비폴리머형(N형)으로 대별되는데, 폴리머형 합성유에는 poly-butene, poly-$\alpha$-olefin, Polyalky lenglycol, Silicon oil, Chlorofluorocarbon, Perfiuoroalkylpolyether 등이 있으며, 비폴리머형 합성유에는 Alkylbenzene, Dibasicacidester, Polyolester, Silicate-ester Polyphenylether, Complex ester 등이 포함된다. 전자의 경우에는 중합반응 조건을 조절하므로써 여러점도 등급의 합성유들을 얻을 수 있는 반면 후자의 경우에는 분자량이 크지 않으므로 저점도의 것만 얻어지는 것이 특징이다.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.153-154
• /
• 2006

The development of metal catalysts that can polymerize or copolymerize "polar" $Ch_2=CHX$ monomers by insertion mechanisms would significantly expand the scope of metal-catalyzed polymerization and enable the synthesis of new materials with enhanced properties. We have studied the reactions of single-site olefin polymerization catalysts with vinyl chloride, acrylonitrile, and vinyl ethers, in order to probe monomer coordination trends, insertion rates and regioselectivity, and the structures and reactivity of metal alkyls that contain functional groups on the alpha and beta positions of the alkyl chain. These studies provide insights to the key issues that underlie the "polar monomer" problem. Copolymerization of olefins and selected vinyl ethers has been achieved.

• Analytical Science and Technology
• /
• v.11 no.2
• /
• pp.105-111
• /
• 1998

The biodegradabilities of surfactants were measured for shampoos and powder detergents for clothing(six kinds of each) in domestic market at present. Also the phosphates that cause of eutrophication and heavy metals to have a direct effect on human body were measured. Analysis results show that though they all come up to KS(Korean Industrial Standards), samples containing plenty of sodium ${\alpha}$-olefin sulfonate(AOS), linear alkyl benzene sulfonate(LAS) and synthetic sodium lauryl etoxylate sulfonate (SLES) have the lower biodegradability than the others. It was found that these samples were petroleum surfactants, and the lower biodegradability than surfactants extracted naturally. The contents of phosphates and heavy metals in the samples were under the regulation limits for the cosmetic standards.