• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.406-412
• /
• 1997

Al2O3/SiC hybrid-composite has been fabricated by the conventional powder process. The addition of $\alpha$-Al2O3 as seed particles in the transformation of ${\gamma}$-Al2O3 to $\alpha$-Al2O3 provided a homogeneity of the microstructure. The grain growth of Al2O3 are significantly surpressed by the addition of nano-size SiC particles. Dislocation were produced due to the difference of thermal expansion coefficient between Al2O3 and SiC and piled up on SiC particles in Al2O3 matrix, resulting in transgranular fracture. The high fracture strength of the composite was contributed to the grain refinement and the transgranular fracture mode. The addition of SiC platelets to Al2O3/SiC nano-composite decreased the fracture strength, but increased the fracture toughness. Coated SiC platelets with nitrides such as BN and Si3N4 enhanced fracture toughness much more than non-coated SiC platelets by enhancing crack deflection.

• 대한금속재료학회지
• /
• 제49권7호
• /
• pp.577-582
• /
• 2011

The newly developed ${\alpha}-case$ controlled mold material for Ti investment castings was suggested in this research. The $Al_2O_3$ mold containing interstitial $TiO_2$ and substitutional $Ti_3Al$ was manufactured by the reaction between $Al_2O_3$ and Ti. It is obvious that as the $TiO_2$ and $Ti_3Al$ content in the mold surface were increased, the depth of the interfacial reaction was significantly reduced. In addition, substitutional $Ti_5Si_3$ in the mold surface owing to the reaction between Ti and $SiO_2$ from the binder was effective for ${\alpha}-case$ reduction. Therefore, the ${\alpha}-case$ reduction was accomplished by the diffusion barrier effect of interstitial $TiO_2$, substitutional $Ti_3Al$ and $Ti_5Si_3$.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2013년도 춘계학술대회 논문집
• /
• pp.53-54
• /
• 2013

Nano-multilayered CrAlSiN films consisting of crystalline CrN nanolayers and amorphous AlSiN nanolayers were deposited by cathodic arc plasma deposition. Their oxidation characteristics were studied between 600 and $1000^{\circ}C$ for up to 70 h in air. During their oxidation, the amorphous AlSiN nanolayers crystallized. The formed oxides consisted primarily of $Cr_2O_3$, ${\alpha}-Al_2O_3$, $SiO_2$. The outer $Al_2O_3$ layer formed by outward diffusion of Al ions. Simultaneously, an inner ($Al_2O_3$, $Cr_2O_3$)-mixed layer formed by the inward diffusion of oxygen ions. $SiO_2$ was present mainly in the lower part of the oxide layer due to its immobility. The CrAlSiN films displayed good oxidation resistance, owing to the formation of oxide crystallites of $Cr_2O_3$, ${\alpha}-Al_2O_3$, and amorphous $SiO_2$.

• 한국세라믹학회지
• /
• 제34권11호
• /
• pp.1187-1197
• /
• 1997

Dry gel composed of primary particles more homogeneous than starting boehmite powder was prepared by dispersing and gelling the boehmite powder. The transformation temperatures of boehmite powder, dry gel seeded with 0, 1, 3, 5 wt% $\alpha$-Al2O3, and ball milled gel were 1192$^{\circ}C$, 1184$^{\circ}C$, 1141$^{\circ}C$, 1119$^{\circ}C$, 1117$^{\circ}C$, and 1106$^{\circ}C$, respectively. Sintering behavior of dry gel without seed was similar to that of boehmite powder, but the sintered density of dry gel was improved as much as 10%~15% than boehmite powder. In the case of dry gel seeded with 5 wt% $\alpha$-Al2O3, sintering behavior was much improved. The relative density of the gel seeded with 5 wt% $\alpha$-Al2O3 was 96% when sintered at 140$0^{\circ}C$ for 1h. On the other hand, ball milling of the non-seeded sol for 48h resulted in the relative density of 97% when sintered at 130$0^{\circ}C$ for 1h. The size and amount of $\alpha$-Al2O3 particles added by ball milling were 0.107 ${\mu}{\textrm}{m}$ and 0.5 wt%.

• 한국재료학회지
• /
• 제11권1호
• /
• pp.34-38
• /
• 2001

Fe-28%Al($Fe_3Al$)과 Fe-28%Al-4%Cr($Fe_3Al-4Cr$) 금속간화합물을 대기중 1073, 1273, 1473k의 온도에서 최고 17일까지 장시간 산화시켰다. $Fe_3Al-4Cr$의 산화저항은 근본적으로 $Fe_3Al$과 거의 비슷하거나, 약간 우수하였다. $Fe_3Al$ 위에 형성된 산화물은 거의 순수한 ${\alpha}-AL_2O_3$로만 구성되어 있었으며, $Fe_3Al-4Cr$ 위에 형성된 산화물은 약간의 Fe와 Cr 이온이 고용된 ${\alpha}-AL_2O_3$로 구성되어 있었다. 외부산화막을 형성하기 위해 모재원소의 외부확산에 의해 산화물-모재 계면에는 Kirkendall 기공이 존재하였다. $Fe_3Al(-4Cr)$ 표면에 형성된 산화막은 1273k가지는 비교적 얇고 치밀하였으나, 1473k에서 산화막의 박리와 함께 상대적으로 큰 무게증가가 발생하였다.

• 한국결정성장학회지
• /
• 제4권3호
• /
• pp.306-314
• /
• 1994

자체 제작한 EFG 장치를 이용하여 ${\alpha}-Al_2O_3 ribbon$ 형태의 단결정을 육성하였다. EFG법의 원리를 연구하여 성장 조건을 수립하였고 성장한 단결정의 특성을 분석하였다.

• 한국결정성장학회지
• /
• 제4권2호
• /
• pp.190-198
• /
• 1994

자체 제작한 EFG 장치를 이용하여 ${alpha}-Al_2O_3$ rod 형태의 단결정을 육성하였다. EFG법의 원리를 연구하여 성장 조건을 수립하였고 성장한 단결정의 결함 voids, striation, 균열, 과 냉각 현상을 광학현미경으로 분석하였다.

• 공업화학
• /
• 제10권7호
• /
• pp.1086-1091
• /
• 1999

$K_2O-MgO-Al_2O_3$의 3성분계로부터 $K^+-{\beta}/{\beta}"-Al_2O_3$를 직접 고상반응법에 의하여 합성하였다. 합성시 초기조성, 합성온도, 합성시간 및 분쇄매체가 ${\beta}/{\beta}"-Al_2O_3$ 상형성 및 상관계에 미치는 영향에 대하여 분석하였으며 최대 분율의 ${\beta}"-Al_2O_3$ 상형성을 위한 최적 합성조건을 연구하였다. 조성범위로서 $K_2O$와 $Al_2O_3$상형성의 몰비를 1:5에서 1:6.2로, 안정화제로 사용된 MgO는 4.2 wt % 에서 6.3 wt % 사이에서 변화시켰으며 합성온도는 $1000^{\circ}C$에서 $1500^{\circ}C$까지 취하였다. ${\beta}/{\beta}"-Al_2O_3$상은 ${\alpha}-Al_2O_3$와 $KAlO_2$가 결합하는 $1000^{\circ}C$ 부근에서 형성되기 시작하여 점차 증가하다가 $1200^{\circ}C$ 부근에서 ${\alpha}-Al_2O_3$가 모두 사라지면서 균일화되었다. ${\beta}"-Al_2O_3$ 상분율은 $K_{1.67}Mg_{0.67}Al_{10.33}O_{17}$의 조성과 함께 $1300^{\circ}C$ 부근에서 최대값을 보였다. $1300^{\circ}C$ 이상의 합성 온도에서는 높은 potassium의 증기압에 따른 $K_2O$의 손실에 의하여 ${\beta}"-Al_2O_3$ 상분율이 감소하였으며 합성시간은 5시간 정도가 적당하였다. 분쇄 및 혼합을 위한 분산매체로는 증류수보다는 아세톤의 효과가 뛰어났다.

• 한국표면공학회지
• /
• 제44권5호
• /
• pp.196-200
• /
• 2011

The Ni-based superalloy, Inconel 713, was oxidized at $800{\sim}1100^{\circ}C$ for 50 and 100 hours in air. It displayed excellent oxidation resistance, forming a few micrometer-thick scales. The major scale was ${\alpha}-Al_2O_3$. Other scales formed were $TiO_2$, $NiAl_2O_4$ and $Cr_2O_3$. Generally, uniform oxidation occurred over the alloy surface, resulting in the formation of ${\alpha}-Al_2O_3$ with and without $Cr_2O_3$. Other oxides such as $TiO_2$ and $NiAl_2O_4$ sometimes also formed. Locally, nodular oxidation occurred at the nodules that consisted of diverse alloying elements. The scales were adherent at $800^{\circ}C$. However, they spalled a little at $900{\sim}1100^{\circ}C$.

• 한국결정성장학회지
• /
• 제5권1호
• /
• pp.11-18
• /
• 1995

EFG 장치를 설계제작하여 ${\Alpha} - Al_2O_3$ tube 형태의 단결정을 육성하였다. 서로 다른 두 개의 heating arrangement를 고안하여 각각의 결정 성장조건을 비교 검토하였으며, 각각의 heating arrangement에서 성장된 tube 단결정의 결함을 비교하여 안정한 성장 조건을 확립하였다.