• 한국세라믹학회지
• /
• 제25권5호
• /
• pp.502-508
• /
• 1988

The $\alpha$ to $\beta$ phase transformation of $\alpha$-Si3N4 whisker and related microstructural changes have been investigated. When only $\alpha$-Si3N4 whisker was heat treated in the range 1650~175$0^{\circ}C$, the $\alpha$ to $\beta$ phase transformation occured. In this case, it eas suggested that the oxygen content in $\alpha$-Si3N4 whisker affected the transformation behavior. Although $\alpha$-Si3N4 whisker with Si was heat treated under the same condition, however, the variation of $\beta$- fraction had a similar tendency with heat treating time. Therfore, it was considered that the oxygen content in $\alpha$-Si3N4 whisker affected the transformation behavior dominently rather than the content of added Si. The added $\beta$ phase did not affect the transformation behaviro of $\alpha$-Si3N4 whisker.

• 한국세라믹학회지
• /
• 제41권3호
• /
• pp.235-242
• /
• 2004

원재료로서 Si, NH$_4$Cl, NaN$_3$, NaCl을 사용하고 SHS법을 이용하여 $\alpha$-Si$_3$N$_4$ 분말을 제조하였다. NH$_4$Cl과 NaN$_3$는 첨가제로서, NaCl은 희석제로서 사용되었고 반응기내 최초 $N_2$ 압력은 60 atm이었다. $\alpha$-Si$_3$N$_4$분말을 제조함에 있어, 첨가제의 종류와 조성, 희석제의 첨가량에 따른 반응성 및 생성물의 특성을 조사하였는데, 우선 $\alpha$-Si$_3$N$_4$ 분말의 제조를 위한 최적의 반응계를 조사하였고, 최적의 반응계에서 최적의 조성을 확립하였다. 최적의 반응계는 Si-$N_2$-additive(NH$_4$C+NaN$_3$)-diluent(NaCl)이었고, 이때 최적의 조성은 38wt%Si+22.5wt%NH$_4$Cl+27.5wt%NaN$_3$+l2wt%NaCl이었다. 이 조건에서 생성된 최고 $\alpha$-Si$_3$N$_4$의 분율은 96.5wt%이었으며 생성된 분말의 입형은 길이가 약 10 $mu extrm{m}$이고 직경이 약 1 $\mu\textrm{m}$인 일방향으로 길게 성장한 부정형의 fiber 형태였다.

• 새물리
• /
• 제68권11호
• /
• pp.1196-1202
• /
• 2018

고상 반응법을 이용하여 처음으로 $Li_2SrSiO_{4-{\alpha}}N_{\alpha}:Eu^{2+}$ 형광체를 제조하고, 제조된 시료들에 대한 결정성 및 광학적 특성을 비교, 분석하였다. 제조된 시료들은 모두 230~530 nm의 넓은 영역에서 효율적인 여기 특성을 보이고 있다. 본 연구에 사용된 시료들 모두 568 nm에서 최대 발광 세기를 보이는데 이는 현재 상용 중인 $YAG:Ce^{3+}$에 비하여 최대 발광 세기가 약 18 nm 장파장 영역으로 이동함을 의미한다. 따라서 450 nm의 빛을 발하는 청색 LED와 결합하면, $YAG:Ce^{3+}$를 사용하여 상용화된 기존의 백색광보다 보다 따듯한 느낌의 백색광원용 형광체로 활용될 수 있으리라 판단한다. 또한 질소의 원료 물질로 사용된 $Si_3N_4$의 분말크기가 마이크론인 경우에 광활성 이온인 $Eu^{2+}$가 첨가되지 않아도 모체발광이 일어난다는 것을 처음으로 알게 되었다.

• 한국세라믹학회지
• /
• 제39권3호
• /
• pp.217-221
• /
• 2002

Si and ${\alpha}-Si_3N_4$ powder mixtures added with 3 wt% $Y_2O_3$ were reacted under 5 MPa nitrogen pressure. The reaction products contained ${\alpha}-Si_3N_4$ particles with elongated shapes. Length and width of the elongated grains were the maximum when the starting powder mixture of 50 wt% Si - 47 wt% ${\alpha}-Si_3N_4$ and 3 wt% $Y_2O_3$ was used. Aspect ratio of the elongated grains were between 4.4 and 5. When the starting powder mixture contained 70 wt% Si, large particles with irregular shapes appeared. Meanwhile, the reaction did not proceed when the starting powder mixture contained 30 wt% Si and less. The SHS product was easy to crush and the elongated particles obtained from the starting powder mixtures of 40 wt% Si - 57 wt% ${\alpha}-Si_3N_4$ - 3 wt% $Y_2O_3$ and 50 wt% Si - 47 wt% ${\alpha}-Si_3N_4$ - 3 wt% $Y_2O_3$ were good candidates for the seeds.

• 한국결정성장학회지
• /
• 제9권2호
• /
• pp.260-265
• /
• 1999

$\alpha$-SiC에 ${\alpha}-Si_3N_4$ 를 10~30 vol%까지 10 vol% 간격으로 혼합하고 소결 조제로$Al_2O_3$와$Y_2O_3$를 각각 6wt% 로 첨가하여 $1,780^{\circ}C$에서 2시간동안 질소 분위기에서 상압소결하여 $Si_3N_4$ 복합체를 제조하였다. 상대 이론 밀도 및 꺽임 강도는 ${\alpha}-Si_3N_4$를 20 vol% 첨가하였을 때 92% 및 3,560 MPa로 가장 우수하였으며, 비마모량도 $2.68{\times}10^{-3}\;mm^2$ 으로 가장 작았다. 그리고, 파괴 인성$(K_{1c})$)은 ${\alpha}-Si_3N_4$를 30vol% 첨가하였을 때 $4.9\;MN/m^{3/2}$로 가장 좋았으나 이 경우 기공의 영향으로 내마모성은 저하된 것을 확인할 수 있었다.

• 한국세라믹학회지
• /
• 제23권1호
• /
• pp.67-73
• /
• 1986

SiC and $SiC-Si_3N_4$ powder were synthesized via the carbiding and carbiding-nitriding reaction of Jecheon quartz respectively using graphite as a reducing agent. $\beta$-SiC+($\alpha$+$\beta$)-$Si_3N_4$ composite was obtained by the carbiding-nitriding reaction of Jecheon quartz-graphite mixture at 1, 35$0^{\circ}C$ in $H_2$ atmosphere. $\beta$-SiC+($\alpha$+$\beta$)-$Si_3N_4$ composite was obtained by the carbidint-nitriding reaction of Jecheon quartz-graphite mixture at 1, 35$0^{\circ}C$ in $N_2-H_2$ atmosphere. The ratio of $\beta$-SiC+($\alpha$+$\beta$)-$Si_3N_4$ content in a produced composite could be controlled by adjusting the reaction time and gaseous mixture.

• 한국세라믹학회지
• /
• 제23권5호
• /
• pp.67-74
• /
• 1986

To investigate the effects of unreacted silicon on the $\alpha$/$\beta$transfornation variation of morphology and mechanical strength of Sintered Reaction Bonded Silicon Nitride the mixtures of $\alpha$-$Si_3N_4$ and Si powder and Reaction Bonded Silicon Nitride were heat treated. The heat-treatments were performed in Ar atmosphere in order to inhibit the nitridation of silicon. In the mixtures heat-trated at 1$700^{\circ}C$ the amount of $\beta$-TEX>$Si_3N_4$transformed from $\alpha$-TEX>$Si_3N_4$was sigmoidally increased and the equiaxed $\alpha$-TEX>$Si_3N_4$grains elongated with the amount of silicon and heat treating time. And large $\beta$-TEX>$Si_3N_4$grains grown into silicon were observed. On the other hand there was no change in the heat-treatment of pure $\alpha$-TEX>$Si_3N_4$In case of the heat-treatment of RBSN the same phenomena due to the silicon appearing from the decomposition of $\alpha$-Smatte and needle were observed. From the three point bending test the strength of the sintered specimens with the and without 5wt% silicon addition had 53Kg/$mm^2$ and 73Kg/$mm^2$ respectively.

• 대한화학회지
• /
• 제38권8호
• /
• pp.570-575
• /
• 1994

$\alpha$-Methylpyridine유도체1(a∼f)는 n-BuLi과의 반응에서 $\alpha$-methylenylpyridinium 염 3(a∼f)을 형성한다. 3(a∼f)와 $Me_3SiCl$ 및 $Me_2SiClCH(SiMe_3)CH_2tBu$반응에서 생성물 4(a∼f) 와 5(a∼f)을 형성한다. 화합물 4(a∼f)에 있는 규소원자와 결합된 methylene기의 수소원자는 화합물 4(a∼f)의 $CH_3$기 보다 n-BuLi과의 반응성이 큰 것으로 확인되었다.

• 한국분말재료학회지
• /
• 제8권3호
• /
• pp.174-178
• /
• 2001

The microstructure and mechanical properties of $Si_3N_4/BN $nanocomposites synthesized by chemical processing were investigated. The nanocomposites containing 15 vol% hexagonal BN (h-BN) were fabricated by hot-pressing $\alpha-Si_3N_4$powders covered with turbostratic BN (t-BN). The t-BN coating on $\alpha-Si_3N_4$particles was prepared by heating $\alpha-Si_3N_4$ particles covered with a mixture of boric acid and urea in hydrogen gas. TEM observations of this nanocomposite revealed that nano-sized h-BN particles were homogeneously dispersed within $Si_3N_4$grains as well as at grain boundaries. The strength and thermal shock resistance were significantly improved in comparison with the $Si_3N_4/BN$ microcomposites.

• 한국세라믹학회지
• /
• 제28권2호
• /
• pp.130-140
• /
• 1991

The powders of the system Si3N4-Y2O3-AlN were prepared using Si(OC2H5)4 and YCl3.6H2O together with commercial AlN powder. $\alpha$-Si3N4 was prepared by the carbothermal reduction and nitridation of the hydrolyzed gel at 135$0^{\circ}C$ for 10h in N2 atmosphere. YCl3.6H2O was observed to be changed to Y2O3 during the reaction. $\alpha$-Sialon(X=0.2, 0.4, 0.6) ceramics were obtained by hot-pressing the Si3N4-Y2O3-AlN mixture at 178$0^{\circ}C$ for 1h under 30 MPa. The content of $\alpha$-Sialon increased with increasing metal solubility(x value) and $\alpha$-Sialon single phase was obtained at the metal solubility of 0.6. With increasing metal solubility, flexural strength, fracture toughness and thermal shock resistence were decreased, while the microhardness was increased. Large elongated $\beta$-Si3N4 grains were mainly observed at lower metal solubility. Mechanical prorerties of the sintered ceramics with X=0.2 were measured as follows : flexural strength ; 650 MPa, fracture toughness ; 3.63 MN/m3/2, hardness ; 14.7 GPa, thermal shock resistence temperature ; 58$0^{\circ}C$.