• 생명과학회지
• /
• 제29권3호
• /
• pp.376-381
• /
• 2019

본 연구는 에탄올내성, 내열성, ${\beta}-glucanase$ 활성 및 xylose 대사가 가능한 새로운 생물시스템을 육종하기 위해 원형질체융합(protoplast fusion)이라는 방법을 사용하여 S. cerevisiae BYK-F11 균주와 P. $stipitis{\Delta}ura$ 균주와의 genome shuffling을 시도하였다. P. $stipitis{\Delta}ura$ 균주는 URA3 유전자를 결실시켜 uracil 영양요구주로 구축되었다. Protoplast fusion을 통해 몇몇의 융합체가 선별되었고, 두 모균주인 BYK-F11 균주와 P. $stipitis{\Delta}ura$ 균주의 핵형(karyotype)를 모두 가지는 BYKPS-F8 균주가 22개의 융합체중에서 최종 선정되었다. 이어 ${\beta}-glucanase$ 활성, xylose 이용능, 에탄올내성, 내열성 및 에탄올생산성에 대한 다양한 표현형이 조사되었다. BYKPS-F8 균주는 모균주인 BYK-F11 균주가 가지는 ${\beta}-glucanase$ 활성을 가지게 되었고, P. $stipitis{\Delta}ura$ 균주가 가지는 xylose 이용능도 모균주보다 1.2배 증가되었음을 확인할 수 있었다. BYKPS-F8 균주는 $40^{\circ}C$에서 내열성을 보였으며, 8% 에탄올이 첨가된 배지에서 모균주에 비해 에탄올 내성이 증가되었음을 확인 할 수 있었다. 20 g/l의 xylose가 함유된 배지에서 72시간 배양에 의해 약 7.5 g/l의 에탄올을 생산할 수 있었으며, 260시간의 장기간의 배양에도 BYKPS-F8균주에 도입한 다형질이 안정적으로 유지됨을 확인하였다. 따라서, 본 연구에서 사용된 균주 육종방법을 통해 다형질을 가진 다른 속간의 균주 융합 및 산업적으로 유용한 생물시스템의 육종이 가능함을 확인하였다.

• Journal of Acupuncture Research
• /
• 제21권4호
• /
• pp.135-147
• /
• 2004

Objective: Moxibustion is one of major healing technique in oriental medicine. It has been widely used in many disease. There is an text which suggest moxibustion is more efficient to the situation of han(寒) and heo(虛) than yeal(熱) and sil(實) in Huangdineijing <黃帝內經>. The aim of this study is to research the effect of moxibustion at Shinmun(H7) is different according to cold or heat tendendy man by analyzing the electroencephalogram(EEG). Methods: We classified objects by their cold or heat tendency using questionnare for cold - heat patternization. (12 cold tendency man, 19 heat tendency man) Before and after moxibustion at Shinmun(H7), EEG raw data were measured during 5 minutes. The correlation dimension(D2), the correlation dimension variability rate(${\Delta}D2$), largest lyapunov exponent(L1) and largest lyapunov exponent variability rate(${\Delta}L1$) were calculated. We analyzed D2, ${\Delta}D2$, L1, ${\Delta}L1$ to see the effect of moxibustion at Shinmun(H7) was statistically different according to Cold or Heat tendendy man. Results : Paired t-test showed significant differences between before and after moxibustion at Shinmun(H7) on the Fp2 in D2(p<0.05), on the Fp2, F3 and F4 in ${\Delta}L1$(p<0.05). Student Hest showed significant differences between cold and heat tendendy man on the F3 in ${\Delta}L1$(p<0.05). Conclusion: These results suggest that moxibustion at Shinmun has an effect on stabilizing mind and it is more efficient to the cold tendendy man than the heat tendendy man.

• Applied Biological Chemistry
• /
• 제51권3호
• /
• pp.233-237
• /
• 2008

우리나라의 자생식물인 털진달래(Rhododendon mucronulatum Turcz. var. ciliatum Nakai)지상부위로부터 정유를 얻고, 휘발성분을 headspace(HS)와 solid-phase microextraction(SPME)법으로 흡착시킨 다음 GC-MS로 분석하였다. 털진달래 정유에는 탄화수소 15종, 알코올 3종, 아세테이트 1종 등 총 19종의 화학성분이 함유되어 있었으며, 다함량 성분은 2-${\beta}$-pinene(16.1%), camphene(11.9%), ${\delta}$-3-carene(11.4%), d,l-limonene(9.5%), and ${\gamma}$-terpinene(9.5%)이었다. SPME법으로 흡착된 시료에는 탄화수소 13종, 알코올 1종, 질소화합물 1종 등 총 17종의 휘발성 화학물질이 함유되어 있었고, 이들 중 다함량 성분은 camphene(19.6%), 2-${\beta}$-pinene(18.0%), ${\delta}$-3-carene(17.4%), timethyl hydrazine(9.7%), ${\gamma}$-terpinene(8.5%), and d,l-limonene(5.5%)이었다. 그리고 HS법으로 흡착된 시료에는 탄화수소 11종, 알코올 1종, 질소화합물 1종 등 총 13종의 휘발성 화학물질이 함유되어 있었으며, 이들 중 다함량 성분은 camphene(25.8%), ${\delta}$-3-carene(24.8%), 2-${\beta}$-pinene(20.2%), d,l-limonene(5.4%), tricyclene(5.1%), trimethyl hydrazine(4.6%)이었다. 털진달래 정유의 향취는 coniferous, balsamic, woody하였으며, HaCaT 각질형성세포에 대한 $IC_{50}$ 값은 0.030 ${\mu}g/mg$이었다.

• Journal of Korean Dental Science
• /
• 제8권2호
• /
• pp.49-56
• /
• 2015

Purpose: The effect of accelerated aging on color stability of various dual-cured self-adhesive resin cements were evaluated in this study. Materials and Methods: Color stability was examined using three different brands of dual-cured self-adhesive resin cements: G-CEM LinkAce (GC America), MaxCem Elite (Kerr), and PermaCem 2.0 (DMG) with the equivalent color shade. Each resin cement was filled with Teflon mold which has 6 mm diameter and 2 mm thickness. Each specimen was light cured for 20 seconds using light emitting diode (LED) light curing unit. In order to evaluate the effect of accelerated aging on color stability, color parameters (Commission Internationale de l'Eclairage, CIE $L^*$, $a^*$, $b^*$) and color differences (${\Delta}E^*$) were measured at three times: immediately, after 24 hours, and after thermocycling. The $L^*$, $a^*$, $b^*$ values were analyzed using Friedman test and ${\Delta}E^*$ values on the effect of 24 hours and accelerated aging were analyzed using t-test. These values were compared with the limit value of color difference (${\Delta}E^*=3.7$) for dental restoration. One-way ANOVA and Scheff's test (P<0.05) were performed to analyze each ${\Delta}E^*$ values between cements at each test period. Result: There was statistically significant difference in comparison of color specification ($L^*$, $a^*$, $b^*$) values after accelerated aging except $L^*$ value of G-CEM LinkAce (P<0.05). After 24 hours, color difference (${\Delta}E^*$) values were ranged from 2.47 to 3.48 and $L^*$ values decreased and $b^*$ values increased in all types of cement and MaxCem Elite had high color stability (P<0.05). After thermocycling, color change's tendency of cement was varied and color difference (${\Delta}E^*$) values were ranged from 0.82 to 2.87 and G-CEM LinkAce had high color stability (P<0.05). Conclusion: Color stability of dual-cured self-adhesive resin cements after accelerated aging was evaluated and statistically significant color changes occurred within clinically acceptable range.

• 한국재료학회지
• /
• 제15권11호
• /
• pp.722-729
• /
• 2005

The electrical and dielectric stability of zinc oxide-based varistors were investigated with the cobalt oxide contents in the range of $0.5\~5.0 mo\l%$. As cobalt oxide contents increased, the ceramic density increased in the range of $5.25\~5.55g/cm^3$ and the varistor voltage decreased in the range of $235.3\~86.0V$. The varistor with on addition of cobalt oxide $1.0 mol\%$ exhibited good nonlinearity. in which the nonlinear exponent is 66.6 and the leakage current is $1.2{\mu}A$. Furthermore, the varistors exhibited the highest electrical and dielectric stability, with $\%{\Delta}V_{1mA}=-1.9\%,\;\%{\Delta}{\alpha}=-10.5\%,\;\%{\Delta}I_L=+275.0\%,\;and\;\%{\Delta}tna{\delta}=+55.6\%$, under DC accelerated aging $0.95V_{1mA}/150^{\circ}C/24h$.

• 한국식품과학회지
• /
• 제31권3호
• /
• pp.575-580
• /
• 1999

복령은 온도와 풍속, 온도와 방사거리를 변화시켜 열풍건조와 원적외선건조방법으로 건조함으로써 건조조건에 따른 색도, 갈변도, 총페놀함량, 전자공여능 등의 품질변화에 미치는 영향을 조사하였다. 색도는 열풍건조시료에서 건조온도와 풍속이 증가할수록, 원적외선건조시료에서 건조온도는 증가하고 방사거리가 짧아질수록 ${\Delta}L$, ${\Delta}a$, ${\Delta}E\;value$는 증가하였고, ${\Delta}b\;value$는 감소하였으며 그 변화폭도 커졌다. 그리고, 갈변된 정도를 알 수 있는 추출물의 흡광도는 색도 변화와 같은 양상을 보였다. 복령의 총페놀함량은 원적외선 시료가 열풍건조시료보다 낮은 함량을 나타냈지만 전체적으로 시판품의 함량보다는 높은 함량을 보였다. 전자공여능은 온도, 풍속과 방사거리에 따른 각 구간별 차이는 거의 없었다. 따라서 원적외선건조보다는 열풍건조로, $50^{\circ}C$의 낮은 건조온도와 0.5 m/s의 느린 풍속으로 건조할 때 품질에 영향을 주는 색도변화와 화학성분함량의 손실을 최소화할 수 있는 것으로 사료되며, 원적외선 열원을 고온, 장시간 사용할 경우 품질손실은 매우 크게 나타났다.

• Wind and Structures
• /
• 제31권3호
• /
• pp.229-240
• /
• 2020

In the present work, the main features of primary vortices and the vorticity concentrations downstream of vortex bursting in crossflow plane of a delta wing with a sweep angle of Λ=70° were investigated under the variation of the sideslip angles, β. For the pre-review of flow structures, dye visualization was conducted. In connection with a qualitative observation, a quantitative flow analysis was performed by employing Particle Image Velocimetry (PIV). The sideslip angles, β were varied with four different angles, such as 0°, 4°, 12°, and 20° while angles of attack, α were altered between 25° and 35°. This study mainly focused on the instantaneous flow features sequentially located at different crossflow planes such as x/C=0.6, 0.8 and 1.0. As a summary, time-averaged and instantaneous non-uniformity of turbulent flow structures are altered considerably resulting in non-homogeneous delta wing surface loading as a function of the sideslip angle. The vortex bursting location on the windward side of the delta wing advances towards the leading-edge point of the delta wing. The trajectory of the primary vortex on the leeward side slides towards sideways along the span of the delta wing. Besides, the uniformity of the lift coefficient, C_L over the delta wing plane was severely affected due to unbalanced distribution of buffet loading over the same plane caused by the variation of the sideslip angle, β. Consequently, dissimilarities of the leading-edge vortices result in deterioration of the mean value of the lift coefficient, C_L.

• The Journal of Advanced Prosthodontics
• /
• 제6권6호
• /
• pp.427-433
• /
• 2014

PURPOSE. Surface color is one of the main criteria to obtain an ideal esthetic. Many factors such as the type of the material, surface specifications, number of firings, firing temperature and thickness of the porcelain are all important to provide an unchanged surface color in dental ceramics. The aim of this study was to evaluate the color changes in dental ceramics according to the material type and glazing methods, during the multiple firings. MATERIALS AND METHODS. Three different types of dental ceramics (IPS Classical metal ceramic, Empress Esthetic and Empress 2 ceramics) were used in the study. Porcelains were evaluated under five main groups according to glaze and natural glaze methods. Color changes (${\Delta}E$) and changes in color parameters (${\Delta}L$, ${\Delta}a$, ${\Delta}b$) were determined using colorimeter during the control, the first, third, fifth, and seventh firings. The statistical analysis of the results was performed using ANOVA and Tukey test. RESULTS. The color changes which occurred upon material-method-firing interaction were statistically significant (P<.05). ${\Delta}E$, ${\Delta}L$, ${\Delta}a$ and ${\Delta}b$ values also demonstrated a negative trend. The MC-G group was less affected in terms of color changes compared to other groups. In all-ceramic specimens, the surface color was significantly affected by multiple firings. CONCLUSION. Firing detrimentally affected the structure of the porcelain surface and hence caused fading of the color and prominence of yellow and red characters. Compressible all-ceramics were remarkably affected by repeated firings due to their crystalline structure.

• 한국의류학회지
• /
• 제42권3호
• /
• pp.503-515
• /
• 2018

In this research, the three-dimensional structural and colorimetrical modeling of yarn-dyed woven fabrics was conducted based on the Kubelka-Munk theory (K-M theory) for their accurate color predictions. In the K-M theory for textile color formulation, the absorption and scattering coefficients, denoted K and S, respectively, of a colored fabric are represented using those of the individual colorants or color components used. One-hundred forty woven fabric samples were produced in a wide range of structures and colors using red, yellow, green, and blue yarns. Through the optimization of previous two-dimensional color prediction models by considering the key three-dimensional structural parameters of woven fabrics, three three-dimensional K/S-based color prediction models, that is, linear K/S, linear log K/S, and exponential K/S models, were developed. To evaluate the performance of the three-dimensional color prediction models, the color differences, ${\Delta}L^*$, ${\Delta}C^*$, ${\Delta}h^{\circ}$, and ${\Delta}E_{CMC(2:1)}$, between the predicted and the measured colors of the samples were calculated as error values and then compared with those of previous two-dimensional models. As a result, three-dimensional models have proved to be of substantially higher predictive accuracy than two-dimensional models in all lightness, chroma, and hue predictions with much lower ${\Delta}L^*$, ${\Delta}C^*$, ${\Delta}h^{\circ}$, and the resultant ${\Delta}E_{CMC(2:1)}$ values.

• Applied Biological Chemistry
• /
• 제35권3호
• /
• pp.210-217
• /
• 1992

토양으로부터 ${\delta}-aminolevulinic$ acid(ALA)의 생산성이 우수한 광합성세균 KUP-74f주를 분리하여 균학적 성질을 검토한 결과 이 균주는 Rhodocyclus gelatinosus로 동정되었다. 균의 배양은 $30^{\circ}C$, pH 6.8, 4Klux 텅스텐 광조도하에서 혐기적 정치배양하였으며, 배양 10일 후의 균체외 ALA 생산량은 5mg/l이었다. L-Glutamic acid를 제외한 Lascelles의 기본배지에 glycerol 0.5%(v/v)를 첨가 배양함으로써 ALA는 8 mg/l까지 증가하였으며, glycine과 succinic acid를 각 10 mM 첨가 배양함으로써 12 mg/l의 ALA가 생산되었다. 30 mM glutathione(redo-cod)의 첨가배양에 의하여 ALA 생산은 저하 되었으며, D,L-glutamic acid 및 D,L-glutamine에 의하여 ALA 생산이 late induction 되어 최고 21 mg/1에 이르렀다. ALA의 최대 생산량에 소요되는 배양시간은 ALA 생합성에 관한 $C_4$, $C_5$ pathways의 precursors 첨가시 각각 107 시간과 262시간이었다. 기본배지에 10 mM levulinic acid(LA)와 10 mM glycine을 동시에 첨가 배양함으로써 ALA 생산량은 40mg/l로 증가하였다.