• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.175-179
• /
• 2005

A novel, simple and broadband $180^{\circ}$ bit X-band phase shifter was proposed and fabricated in a standard micromachining process. It is composed of two $90^{\circ}$ parallel-coupled lines; one of which is shorted and the other is grounded. Design equations for the proposed $180^{\circ}$ bit phase shifter are derived by the method of even and odd mode analysis. Based on design equations, $180^{\circ}$ bit phase shifter was designed and fabricated to operate from 7 to 13 GHz with ${\pm}5^{\circ}$ of phase deviation.

• Proceedings of the KOSOMBE Conference
• /
• v.1989 no.05
• /
• pp.35-37
• /
• 1989

A new MR angiography technique using a composite sequence for the suppression of static sample signals is proposed and verified with experiments. When the composite [$90^{\circ}-{\tau}-180^{\circ}-2{\tau}-180^{\circ}-{\tau}$] sequence is applied, the large signal from the static sample is sufficiently suppressed but the signal from fresh inflow sample of which amplitude. is observed without suppression. These properties are appropriate for angiographic applications. In this paper, a modified line scan method (Block line scan angiography) incorporated with the composite [$90^{\circ}-{\tau}-180^{\circ}-2{\tau}-180^{\circ}-{\tau}$] sequence is used to obtain flow-only images, i.e., angiograms. The block line scan method improves the resolution in the flow-direction at the expense of imaging time. With the composite sequence, there is no need for subtraction procedure as in the most conventional angiographic methods. Experimental results for a phantom and a normal volunteer with KAIS 2.0 Tesla MRI system are shown.

• The Korean Journal of Nuclear Medicine
• /
• v.29 no.4
• /
• pp.478-483
• /
• 1995

We compared the influences of reconstruction methods using $180^{\circ}$ or $360^{\circ}$ data upon contrasts and discriminating capability and diagnostic accuracy in $^{99m}Tc-MIBI$ stress/rest myocardial SPECT. We reviewed SPECT images reconstructed only with $180^{\circ}$ projection data or with $360^{\circ}$ data in 18 patients and in 11 normal subjects. To compare counts of surface structures and deep structures, we measured ape# posterior wall ratios in 11 normal subjects. To compare the contrasts of images, we measured apex/ventricle ratios. To compare contrasts between normal and diseased myocardial segments, we measured count ratios of defect and normal segments in 4 patients who had single coronary artery diseases. To compare diagnostic accuracy, we scored SPECT images made with $180^{\circ}$ and $360^{\circ}$ data segmentally. Sensitivity and specificity for the diagnosis of coronary artery disease and for the revelation of diseased arteries with both $180^{\circ}$ and $360^{\circ}$ SPECT images. If involved coronary arteries had more narrowing than 50% In coronary angiogram, we considered them as diseased arteries Apex/posterior wall ratios were not different significantly in normal subjects. Apex/ ventricle ratios in normal subjects were different significantly between $180^{\circ}$ and $360^{\circ}$ SPECT images. Defect/normal ratios were different significantly between $180^{\circ}$ and $360^{\circ}$ SPECT images in single vessel disease patients. The overall diagnostic accurracy was the same between $180^{\circ}$ and $360^{\circ}$ data collection. Sensitivity was 94% and specificity was 91% for both types of data collection in this sample population. Sensitivity and specificity of each coronary artery territory were not significantly different between the images made with $180^{\circ}$ and $360^{\circ}$ data. The images made with $180^{\circ}$ data had better contrast between ventricle and myocardium and between hypoperfused and normal myocardium, though no difference was found between the ratios of the myocardial counts of surface and deep structures. However, diagnostic sensitivities of diseased artery territories were not different significantly and so were overall diagnostic accuracy between both methods of making images with $180^{\circ}$ and $360^{\circ}$ data.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.4
• /
• pp.221-224
• /
• 2006

To analyze how the furrow directions made by the azimuth of $90^{\circ}-270^{\circ}(N\;90^{\circ})$, $120^{\circ}-300^{\circ}(N\;120^{\circ})\;and\;0^{\circ}-180^{\circ}(N\;180^{\circ})$ effect on the growth characteristics and yield of 2 and 3-year-old ginseng, both of $N\;90^{\circ}\;and\;N\;180^{\circ}$ compared with$N\;120^{\circ}$ recommended as the standard practices for ginseng cultivation. $N\;90^{\circ}$ showed lower quantum and air temperature during forenoon, while it showed higher quantum and air temperature from 15:00 to 19:00 than that of $N\;120^{\circ}$. $N\;180^{\circ}$ showed high quantum and air temperature due to the distinct increase of sunlight penetrated from 9:00 to 11:00, and which were similar to that of$N\;120^{\circ}$ during afternoon. Stem length and leaf area in $N\;90^{\circ}\;and\;N\;180^{\circ}$, respectively, were decreased more than that of$N\;120^{\circ}$, and those in $N\;180^{\circ}$ were decreased more distinctly than $N\;90^{\circ}$. Heat injury rate was decreased in $N\;90^{\circ}$, while it was increased distinctly in $N\;180^{\circ}$ that showed high quantum and air temperature, and which showed great variation according to the year. Yield of $N\;180^{\circ}$ was decreased more than that of$N\;120^{\circ}$ in 2004, the year when it was a relatively high air temperature during summer season, but which was increased more than that of$N\;120^{\circ}$ in 2005 showing a rotatively low air temperature.

• ETRI Journal
• /
• v.33 no.1
• /
• pp.13-17
• /
• 2011

A highly miniaturized on-chip $180^{\circ}$ hybrid employing periodic ground strip structure (PGSS) was realized on a silicon radio frequency integrated circuit. The PGSS was placed at the interface between $SiO_2$ film and silicon substrate, and it was electrically connected to top-side ground planes through the contacts. Owing to the short wavelength characteristic of the transmission line employing the PGSS, the on-chip $180^{\circ}$ hybrid was highly miniaturized. Concretely, the on-chip $180^{\circ}$ hybrid exhibited good radio frequency performances from 37 GHz to 55 GHz, and it was 0.325 $mm^2$, which is 19.3% of a conventional $180^{\circ}$ hybrid. The miniaturization technique proposed in this work can be also used in other fields including compound semiconducting devices, such as high electron mobility transistors, diamond field effect transistors, and light emitting diodes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.6
• /
• pp.15-23
• /
• 2000

In the present study, flow characteristics of turbulent pulsating flow in the square-sectional $180^{\circ}$curved duct are investigated experimentally. In order to measure axial direction velocity and secondary flow distributions, experimental studies for air flow are conducted in the square-sectional $180^{\circ}$curved duct by using the LDV system with the data acquisition and the processing system of the Rotating Machinery Resolver (RMR) and the PHASE software. The experiment is conducted on seven sections form the inlet($\phi=0^{\circ}$) to the outlet($\phi=180^{\circ}$) at $30^{\circ}$intervals of the duct. The results obtained from the experimentation are summarized as follows : In the axial direction velocity distributions of turbulent pulsating flow, when the ratio of velocity amplitude (A1) is less than one, there is hardly any velocity change in the section except near the wall and in axial velocity distribution along the phase. The secondary flow of turbulent pulsating flow has a positive value at the bend angle of $150^{\circ}$regardless of the ratio of velocity amplitude. The dimensionless value of secondary flow becomes gradually weak and approaches zero in the region of bend angle $180^{\circ}$without regard to the ratio of velocity amplitude.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.1
• /
• pp.131-138
• /
• 2001

In this paper, an experimental investigation of characteristics of developing turbulent steady flows in a square-sectional $180^{\circ}$curved duct is presented. The experimental study using air in a square-sectional $180^{\circ}$ curved duct carryed out to measure axials direction velocity and wall shear stress distrbutions by using Laser Dopper Velocimeter(LDV) system with data acquistion and processing the system of FIND6260 softwere at 7 sections from the inlet($\phi=0^{\circ}$) to the outlet($\phi=180^{\circ}$) in $301^{\circ}$ intervals of a curved duct.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.05a
• /
• pp.127-133
• /
• 2000

In the present study flow characteristics of turbulent pulsating flow in a square-sectional 180。 curved duct are investigated experimentally. in order to measure axial velocity and secondary flow distributions experimental studies for air flow are conducted in a square-sectional $180^{\circ}$ curved duct by using the LDV system with the data acquisition and the processing system of the Rotating Machinery Resolver (RMR) and the PHASE software. The experiment is conducted on seven sections form the inlet(${\phi}=180^{\circ}$) at $30^{\circ}$ intervals of the duct. The results obtained from the experimentation are summarized as follows : In the axial velocity distributions of turbulent pulsating flow when the ratio of velocity amplitude(A1) is less than one there is hardly any velocity change in the section except near the wall and any change in axial velocity distribution along the phase. The secondary flow of turbulent pulsating flow has a positive value at the vend angle of $150^{\circ}$ without regard to the ratio of velocity amplitude. The dimensionless value of secondary flow becomes gradually weak and approaches zero in the region of bend angle $180^{\circ}$ without regard to the ratio of velocity amplitude.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.1061-1062
• /
• 2012

• Journal of the Korean Society of Food Culture
• /
• v.31 no.6
• /
• pp.643-651
• /
• 2016

This study was investigated the difference in the quality characteristics of the fermented soybean roasted with different conditions for making chungyukjang. Roasted condition of soybean was decided by pre-test, which was on $140^{\circ}C$ for 21 min, $180^{\circ}C$ 9.5 min, and $220^{\circ}C$ 6 min. Fermented soybean with different roasted condition and conventionally made cheonggukjang were measured for proximate composition, color, pH, amino nitrogen, ammonia nitrogen, free sugar and amino acids. The lightness and yellowness of soybean fermented by conventional method was higher than those of the fermented soybean with roasted soybean. The contents of free sugar of fermented soybean roasted on $220^{\circ}C$ for 6 min (FS220) was the highest among the group and followed by fermented soybean roasted on $180^{\circ}C$ for 9.5 min (FS180), $140^{\circ}C$ 21 min (FS140) and conventional cheonggukjang (FS0). The contents of total free amino acid was highest on fermented soybean roasted on $140^{\circ}C$ for 21 min (FS140) and followed by fermented soybean roasted on $180^{\circ}C$ for 9.5 min (FS180), $220^{\circ}C$ 6 min (FS220) and conventional cheonggukjang (FS0).